tacomaguy1

Mine had the same black stuff leaking, but only because it got punctured on the bottom. Xs told me to seal it with a plastic epoxy, I did and its been fine ever since

Take it to a battery shoo and have it load tested

Autorama 2014?

Tuned in to see how you fit 4 9ks and batts in there lol

if they were the cheapest ones ($50 ea, i'm sure they're not all 3ft) it would be $1450

Dropped it in?....same box

Good deadener, doesn't matter what temp really

^ says in the op

same I'm sure hundreds of hours have been put into this system but I was expecting something crazy like a quasi 88th order or something. But a 165 is ridiculous makes me want to buy some more sundown productsThat's the thing....they don't need to be overly complicated boxesMost are simple just with a lot of testing to get ratios/tuning right

No, just bolts

But if the amp only comes with single or dual inputs then shouldn't that be enough and that's how it should be tested? Idk that's my way of thinking about it

So how does this thing work....you wont see these numbers installed in a real system right? This is perfect situation, voltage and no rise

What car Some will run 14v no problem but I've heard some cars electronics don't like it

I would, ran my sundown 3k at .33 daily

Its not double, xs has said 1.5....idk how they came up with that

4 7500's is like 6 3100's according to xs so that beats the 5 you had on the list You have a lot of alt power, but if you think about it its only one battery per amp Do 6 7500's. Look at the money you have in it all, wont kill you to buy 2 more

Look up....only pics out there I think No real info either

Measure it? All the dimensions are on the xs website

If this happened how would he control who sent what in and when? I could see him getting like 30 amps at once, so 30 weeks of videos he has to make? Then those people that send those amps in have to wait for theres to be done, packaged back up and shipped.....I could see some long wait times I'm sure he's already busy as it is I know he wouldn't just say "send them in all at once" but idk lol

X series

He's not asking how to do it, he's asking if his cars electronics will handle the higher voltage. Some do and some don't Just gotta wait and see if someone that has tried it will chime in or test it yourself

usually 1/2" or so shorter....I assume it has a smaller pulley? Find out the stock length somewhere online than you can go on any parts site and look up one smaller than that. Gates are nice and they have a website with all the lengths and part numbers

not if you want to stay above 13v for a decent amount of time, more batts would help.....2nd alt would be the best thing

3 group 31's minimum Need to keep the voltage up on those amps

Effect what?.....they help to stabilize your voltage, keep it from dropping as much Wrap the 3400 in some sort of heat barrier when using under the Hood They can swell from the heat