HatersGonnaHate

I've had problems with adhesion on my older boxes, and that was just paint with no primer. Since I started using the primer again, I haven't had any problems with it sticking. So I just do it for the hell of it. And the fact that I have like 13 cases of primer in my shed, might as well get rid of the shit lol Oh an the rust-o-leum isn't just for metals, they've got it for wood and plastic too, so not all of it has rust inhibitors

It really just depends on how you want the finish to look.

Yessir. You can go with the cheap-o primer, just don't skimp out on the spray paint. I use the rust-o-leum bed liner spray, works wonders and it's durable as hell. For regular spray paint, I'd recommend krylon or rust-o-leum.

Same thing I do lol. And as many coats as it takes! Before priming, sand all rough spots out. Wipe dust off. Use Elmer's wood filler or Bondo to fill in the screw holes or any dings/uneven gaps. Use the wood filler or Bondo along all cut seams, the edges really, of the MDF. Those seams suck up a shit ton of primer/paint. After you've filled/Bondo'd everything that needed it, go over it with your primer, most likely 2-4 good coats. Don't go too heavy with it, just do the first coat to cover a majority of it, then the rest of the coats to cover up what's been missed. Let that dry and repeat the process with the bedliner.

I've used them all. None of them are accurate. Microphones in phones are just that, microphones. Made for clarity, not made to measure sound pressure.

I did a 178...... Not accurate at all lol. If it is, I should be legally deaf. Or retarded.

Head gasket. Run a compression check on all the cylinders. I'm shooting for the worst case scenario, so if I'm wrong, everything else will be easier to fix

I lol'd as well. I go to competitions, they don't come to me lol No matter how far it is, it's your dedication to the game that gets you there

Did you even try looking in the competitor/car show section?

New JVC units have a customizable display. A couple thousand colors. Yes, lime green is in there.

http://lmgtfy.com/?q=vevo

I don't want some lol. I'm too busy dealing with liquor shits this afternoon haha

No, that wasn't it. Cleared out the bottle of Jager, switched to Captain Morgan private stock, cleared that out, then switched to Crown Royal black. Did not clear out that bottle. And had a few beers. And I'm alive because I'm Irish. Boom.

Jager bitches. 6 shots down. No chaser. Catch up ladies.

Oh, and take a center punch and hammer your drilling location, great idea so the drill bit doesn't try to walk on you.

Easiest way? A good drill bit, a corded drill or a beefy ass battery powered one, patience. Rigid has good metal bits, I've used them on cars in the past with no problems.

Boom. Hope this helps bro, and good luck with it http://hhrchevyfamil...d_post2187.html And yea, that's an HHR, but it's the same concept for the cobalts.

Hahahaha "THE PORN GUY"

Could have been so much worse, but I'm so glad it wasn't!

Yea, the pictures came up on my facebook, surprised the fuck out of me. Some scary shit. Really glad they're ok though

PSI had a horrible week. http://www.caraudioclassifieds.org/forum/fix-my-speaker/117933-our-trip-spring-break-nationals-2012-full-story.html#post1610842

Doesn't really matter if you do 45's or use the pvc, you can't really notice it by ear. So just do whichever is easier.