MRLOVETHATBASS
Members-
Posts
44 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Media Demo
Store
Collections
Videos
Everything posted by MRLOVETHATBASS
-
Heres a pic of this box in my jeep, and i even had one that was bigger than this before. And yes i can get my back seat up.
-
and now im running two sundown niteshade 18s in 9 cube net box.
-
wat up my man , i have a jeep srt8 which is smaller than the regular cherokee in the back and i have had numerous four 15 boxes in there and pounded the shit out of the truck, i have had four rockford p 3s and i recently had four american bass hd 15"s in 16 cubes net net and broke the sunroof rite out of my truck.
-
sundown zv3 18"s , i dont no if your familiar with those but sundown subs like smaller boxes compared to most companies. I talk to the owner of sundown and he said put them in a box about 8.35 net after displacements with the power i have. They recommend 4 cubes per driver for 18s.
- 3 replies
-
- sundown
- aero ports
-
(and 2 more)
Tagged with:
-
Since im shrinking my box from 10 cubes to 8.5 do i still need both 8 " aero ports I had two 8" aero ports in a box that was 9.83 to 10 cubes net but now im shrinking my box to 8 to 8.5 cubic ft net. Can i get away with only using one 8" aero port. I seen a guy who had a box that was like 9 cubes net with four sundown niteshade 12s on about 8k and it was nasty loud. so im wondering since im going to 8-8.5 roughly on the same power this should work rite????
- 3 replies
-
- sundown
- aero ports
-
(and 2 more)
Tagged with:
-
Ive seen guys on here talking bout 0 guage welding cable is cheaper than 0 guage power wire, is this true and were to buy. its seems like you can get cheaper 50 ft of 0 guage power wire then welding cable online.
-
LOL what? It depends... for a low power setup I would say negligible... but its for less resistance. Think of it as a water pipe, a wider pipe puts the water under less pressure to get where it needs to go. For those two amps it couldnt hurt, both are single inputs and for a 3500 watt amp at full tilt, the current draw is right up there for a single run of 1/0. so basically with dual inputs i can more juice to the amps. then especially with two runs of 0 goin into the amp.
-
its not a vs thread, because im not asking about the amps, i alreadly have my amps, i just want to no if there any benifits of using dual inputs
-
wats up guys , im wondering wats the pros and cons of running tool maker dual inputs to a crescendo bc3500 or sundown 3500? like will i see a power increase or is even worth it to buy them.
-
hey wats up fellow bass heads, im noticing a a drop in my voltage and i was wondering would it make any diffrence if i disconnected the extra runs of 0 guage coming from the back to alt to the front battery then alternator. like basically my extra runs of 0 are connected to my alternator meaning power wire. but i was thinking bout taking them off and connecting them to the front battery then to the alternator., would ait make a diffrence