EclipseChris Posted March 28, 2011 Report Posted March 28, 2011 Harbor freight sells cable cutters for 7 dollars. They are cheap and Arnt the best but it works great i resolve to be a nicer moderator. Tercel build R.I.P. Eclipse build Old New V-Dub My feedback.
JasonsKreationz Posted March 28, 2011 Report Posted March 28, 2011 I use these, they work pretty good. 05 Ram 1500 4x4 Hemi - 22x11 Fuel Hostage wrapped in 37" Nitto Mud Grappler - 3" Dual Flow Master w/ X pipe - 10" lift - Alpine 103BT Head unit - JL Audio J2-320.4 - JL Audio J2-1000.1 - (2) 12" JL Audio W3V3 - (2) sets of JL Audio components - 5% tint - 6000K HID - CAI - and more....
CLNFREAK Posted March 28, 2011 Report Posted March 28, 2011 I use on of these.... they are expensive... to buy ... but a contractor owed me money.. so I got my money in tools
audio1der Posted March 28, 2011 Report Posted March 28, 2011 Holy Sh*t- that was scary to watch. I use large diameter fibre optic cutters (old tool from work). If it can cut through armored 288 fibre cable, it can cut any copper wire Big 3 with 1/0 welding cable, dual runs of 1/0 and 2gua F-R DD 2512 D2 powered by Audioque 1200d at 1ohm, 2.5ft^3 ported to 36Hz Boston SX 6.0 comps powered by Phoenix Gold M50 for front stage Silver Flute 8" midbass in doors powered by Alpine 3539 Alpine CDA-117 HU
Torres Posted March 28, 2011 Report Posted March 28, 2011 i stick the wire in a vice and just use a hacksaw
JaM Customs aka mprete Posted March 28, 2011 Report Posted March 28, 2011 yea... terrible idea haha. the second one did work until the wire gets caught on the blade and fucks your saw lol and please learn how a sawzall works. that probably would have worked if you knew. ive used only a razor before and that works just fine. but if not i have crimpers that have are bi enough to cut the wire pretty easily. 2001 dodge ram 2500 quad cab 5.9L V8 my build logs... dodge build http://www.stevemeadedesigns.com/board/topic/94914-mpretes-2001-dodge-ram-2500-quad-cab-build-log/ trik build http://www.stevemeadedesigns.com/board/topic/94447-trik-build/page__p__1298547__hl__trik__fromsearch__1entry1298547 box building thread- very cool designs (PICS!!!) http://www.stevemeadedesigns.com/board/topic/95713-2d-or-3d-box-pics/page__gopid__1318152entry1318152 i am a mechanic, pm me if you have questions or anything.
AudioFiend Posted March 28, 2011 Report Posted March 28, 2011 Jaws of life ftw. Michigan Sundown Audio & Top Dog Audio Sales Rep
bignickk Posted March 28, 2011 Report Posted March 28, 2011 wait how do u guys strip the wire to fit a connector or put it in the amp? why not do it the same way? and i use dikes little by little 2000 tahoe orion hcca 15.4 kicker zx2500 2 JL 300/4s infinity and kicker mids/highs KHC1400 in back, stock upfront dont ask about my HU clarion EQ kicker/fosgate rcas
Delinquincy Posted March 28, 2011 Report Posted March 28, 2011 i use wire dykes and a box cutter...works for me 2000 Pontiac Grand Am GT SYSTEM REBUILD
ISO Posted March 28, 2011 Report Posted March 28, 2011 You should be able to cut 0 gauge with a set of dykes and no more than 3 cuts. Worst case scenario is a hacksaw and I mean worst case. Isobaric - Refers to the practice of coupling two drivers together to make them act as one. "Giving up doesn't always mean you are weak; sometimes it means that you are strong enough to let go." Insanity: doing the same thing over and over again and expecting different results. The Destruction of a person builds character.
Recommended Posts
Archived
This topic is now archived and is closed to further replies.