Swaggasaur Posted April 2, 2011 Report Posted April 2, 2011 Could they take 3500 each? Quote BHE Wall Build TEAM DC Audio TEAM XS POWER1986 Monte Carlo KMC Nova's 20"4 DC XL's W/ PSI Recones2 DC 5k'sPioneer PRS 8010 Audio Technix 6 XS Power D3100's 1 XS Power D3400 Mechman 220a Alternator
OrionStang Posted April 2, 2011 Report Posted April 2, 2011 Depends on install factors, but yes. Quote SMD Super Seller My Feedback Thread
CJ18 Posted April 2, 2011 Report Posted April 2, 2011 Not going to recommend it but if you know what you are doing and can properly scope your entire system from HU to amps and make sure it is PERFECTLY CLEAN POWER, you will be pushing them to their absolute daily limit. Also a custom spider pack will be needed to help handle all of the extra power. Quote
AI James Posted April 2, 2011 Report Posted April 2, 2011 fully clean power and clamped power i'll fry that coil on 3500rms Quote
trulywickedcustoms Posted April 2, 2011 Report Posted April 2, 2011 I'm sure I'll get corrected but clay from the A team has done a ton and I mean a TON of testing with the XLs and supposedly a stock XL can take 3K with the right box and user... Supposedly anything above 3K just generates heat..... An jeff is running close to 5k on each of his (2 1100.1s on 4 XLs) but he's got an upgraded spider pack (assortment of soft and mediums) that if Iirc was advised by clay... Quote *2013 NEW BUILD* 12- 18" Crossfire XS v2's B pillar 4th order wall 4- Crossfire 8K mono blocks 40+ pro audio mids tweeters and horns 3- Singer alternator 400a external regulated alts tons of audiotechnix wire 24- XS Power D1400's -TEAM XS POWER- -TEAM CROSSFIRE- -TDH-
RickyFriery97 Posted April 2, 2011 Report Posted April 2, 2011 Are they 18s? I saw a walled explorer walled with 4 XL 18s on a sundown 3500d on each sub I think the guy is 91explorer on here and he said the subs handled it good He has 9 XL twelves on 6 sundown 4500d now Quote 2014 Chevy Silverado Crewcab 1994 Chevy Full Size blazer
CJ18 Posted April 2, 2011 Report Posted April 2, 2011 There are alot of thing that have to be done right and done by someone that knows exactly what they are doing but it can be done. But remember that if you fry the coil, that is on you and not on the company that made the sub. Quote
trulywickedcustoms Posted April 2, 2011 Report Posted April 2, 2011 I was just going through all this with my rebuild asking the same questions... Till be around 3,500 per sub before rise but true clamped power will be more like 2,500 or so per sub.... Quote *2013 NEW BUILD* 12- 18" Crossfire XS v2's B pillar 4th order wall 4- Crossfire 8K mono blocks 40+ pro audio mids tweeters and horns 3- Singer alternator 400a external regulated alts tons of audiotechnix wire 24- XS Power D1400's -TEAM XS POWER- -TEAM CROSSFIRE- -TDH-
matt402 Posted April 2, 2011 Report Posted April 2, 2011 I'm sure I'll get corrected but clay from the A team has done a ton and I mean a TON of testing with the XLs and supposedly a stock XL can take 3K with the right box and user... Supposedly anything above 3K just generates heat..... An jeff is running close to 5k on each of his (2 1100.1s on 4 XLs) but he's got an upgraded spider pack (assortment of soft and mediums) that if Iirc was advised by clay... the XL is louder than a lvl 5 up to 3kw, but the XL can handle 3.5kw... OP if ur wanting to buy a 3.5k amp id go for the XL>5, after rise & voltage drop u will prolly see <3kw from the amp... =] Quote
C-Fizzy Posted April 2, 2011 Report Posted April 2, 2011 Just because someone has a 3500 on a sub, doesn't mean it's getting 3500. Box rise and voltage drop sucks ass. Quote under construction I hate People with crappy primered cars rolling on hubcaps that are louder then me. u hate c-fizzy?
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.