alaskanzx5 Posted February 7, 2012 Report Share Posted February 7, 2012 well, with money in mind in needing the money to get the car painted i can get the t2 set for about 240 or 2 of those promidbass speaker and punch tweeters for about 120. half the price for the punch and im not real big on sq for this car and im only gonna run the the doors off of a t400.4, oh and the rear doors will reamain the t1 6x8s that are in there now well, made up my mind quickly, just now realized that the crossovers that come with the tweets dont have the lp on them so just a set of the t1 tweets to add to the t1 6x8s upfront. t1500bdcp 2 t2d4 15" 1 t600.4 1 t400.2 1 set p1 tweets singer alt, tons of wiring, smd vm-1, 80prs, back seat delete, still in the works, aiming for a 145-147 with the ability to play 25hz up to 50hz. Link to comment Share on other sites More sharing options...
bigmescan Posted February 7, 2012 Report Share Posted February 7, 2012 I'm gonna be doing the same to my truck. It will be my first time as well. Post as many pics as you can. I've just purchased 2 sets of the MB quart onxy series components. Will be powered by rf power 400.4. I just don't know the enclosure attaches to the door once its finished. SONY XAV-701HDRF power 400.4 RF power 1000bd 3 Sundown x8's d22004 f150 single cab2 sets of components MB quart 6.5 onx (2 tweets 2 6.5 perdoor)stock batt up fronBIG 3http://www.stevemead...-vid-pg-11-922/http://www.youtube.c.../TheBigmescan74 Link to comment Share on other sites More sharing options...
basscherokee Posted February 7, 2012 Report Share Posted February 7, 2012 congrats! looks 10x better than my first haha. ill try to find a pic 2001 vw gti 2 hds212s 4.75 net tuned to 34hz audioque1200 wired to 1 ohm nvx 0 gauge to the back kinetic khc 2000 kenwood deck Link to comment Share on other sites More sharing options...
n8ball2013 Posted February 7, 2012 Report Share Posted February 7, 2012 gonna want to add some matting for strength THERE IS NO BUILD LOG! 1998 Chevy Silverado ext cab Alpine CDA-9887 4 Team Fi 15s 2 Ampere Audio TFE 8.0 2 Ampere Audio 150.4 3 Digital Designs CS6.5 component sets Dual Mechman 370XP Elite alternators inbound! 8 XS Power d3400 6 XS power d680 Second Skin Stinger Tsunami Wiring Sky High A Real Voltmeter not a piece of shit stinger. Link to comment Share on other sites More sharing options...
Loslam Posted February 7, 2012 Author Report Share Posted February 7, 2012 gonna want to add some matting for strength 10 4, will do on the inside before bondo 1997 Chevrolet Silverado Extended Cab, 350 Vortec Things to come at some point... Build Log: http://www.stevemead...2200ds-133-ohm/ Link to comment Share on other sites More sharing options...
alaskanzx5 Posted February 7, 2012 Report Share Posted February 7, 2012 so, if you wre to add say 3 layers of matting about how much thicker will it be? i know that yu use a fleece or stretchy fabric to get the general shape you want but then when you add matting it builds up. im wanting to know how much it builds up from 2-4 layers so that when i do my doors i can make sure i compensate for that. i like my leg room and im gonna try to keep it all flush with the rest of the door t1500bdcp 2 t2d4 15" 1 t600.4 1 t400.2 1 set p1 tweets singer alt, tons of wiring, smd vm-1, 80prs, back seat delete, still in the works, aiming for a 145-147 with the ability to play 25hz up to 50hz. Link to comment Share on other sites More sharing options...
Loslam Posted February 12, 2012 Author Report Share Posted February 12, 2012 Did a little more work this weekend, sanding took up a lot of time Probably going to do one more layer of filler to get rid of the small holes, then painting time Added two layers of cloth and more glass on outside for strength on each Hit it with some 50 grit to knock it down as much as I could for less filler Made a pretty big mess with bondo After 120 grit After 320 grit How it's looking so far 1997 Chevrolet Silverado Extended Cab, 350 Vortec Things to come at some point... Build Log: http://www.stevemead...2200ds-133-ohm/ Link to comment Share on other sites More sharing options...
kbsmoker Posted February 12, 2012 Report Share Posted February 12, 2012 nice work www.dcsoundlab.comyoutube video's kbsmoker2011 MECAOH AS3 Champ 147.5OH DB2 Champ 125.9WF AS3 3rd 147.3WF DB3 2nd 128.3 SystemPioneer AVH-P4300DVD2 sets Fusion Encounter 6.5 componentson Crunch Ground Pounder 1200.418" DC NEO on DC 5.0KKnukonceptz 1/0 through outBig 3 all 1/0XS D6500under hood D3100 in the backMechman 270....rebuilt by Ohio Generator Link to comment Share on other sites More sharing options...
carshateme Posted February 12, 2012 Report Share Posted February 12, 2012 Moar! And videos! =) New build coming soon. [center][url="http://imageshack.us/photo/my-images/3/sigtoo.jpg/"][img]http://img3.imageshack.us/img3/9541/sigtoo.jpg[/img][/url][/center] Link to comment Share on other sites More sharing options...
MrSkippyJ Posted February 12, 2012 Report Share Posted February 12, 2012 so, if you wre to add say 3 layers of matting about how much thicker will it be? i know that yu use a fleece or stretchy fabric to get the general shape you want but then when you add matting it builds up. im wanting to know how much it builds up from 2-4 layers so that when i do my doors i can make sure i compensate for that. i like my leg room and im gonna try to keep it all flush with the rest of the door you can add matt to the back side too. keep that in mind Doors look good man! F150: Stock 2019 Harley Road Glide: Amp: TM400Xad - 4 channel 400 watt Processor: DSR1 Fairing (Front) 6.5s -MMats PA601cx Lid (Rear) 6x9s - TMS69 Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.