meade916 Posted May 9, 2012 Report Share Posted May 9, 2012 I think i am sticking with plan C! Instead of modding the "plan A and B" box to fit the 15, i said "f#$K it" and built it all nevw from scratch. This time i used all 1" with exception of the bottom board (due to fitment issues). Its ok though, the bottom board is on the floor of the trunk so its plenty thick. I will probably do some glassing as well. This will be a LONG build so hang tight i cant do it all in one day! FYI: all RF amps and hopefully 3 sets of T5 components to go with this... Time to cut the port. It has 51" of area. It is 8.5x6" and 14" long. Tuning 38hz. 5 Quote All SMD products + MORE available at my store here! https://wccaraudio.com/ Subscribe to My Youtube Channel! Over 1,000,000 subscribers strong! Turn on your notifications! http://www.youtube.com/meade916 Follow My Instagram! Daily live feeds from the shop, exclusive content way before it hits my Youtube channel...and little squares with photo's in them http://www.instagram.com/meade916 The Official SMD Facebook fan Page https://www.facebook.com/SteveMeadeDesigns/ Follow my Tweet (Twitter) http://www.Twitter.com/meade916 Link to comment Share on other sites More sharing options...
727Designs Posted May 9, 2012 Report Share Posted May 9, 2012 In case you didn't know, I'm 120% jealous of the panel saw. LOL I use the same corner clamps as well. Progress looks sweet, but you know you gotta put up more pics than that! 1 Quote -Zach-2010 Toyota TundraFull Hybrid Audio SQ 7" BDS on 37's 2000 Ford Expedition 160+ dB Green Turd -SOLD- Link to comment Share on other sites More sharing options...
meade916 Posted May 9, 2012 Author Report Share Posted May 9, 2012 The hole on the left, obviously the woofer, the square in the middle is where the ski-hole is......and the rectangle, obviously is the port. It don't really matter where the ski hole is because i am cutting all that metal out. I just wanted a reference so i knew where i was at. 2 Quote All SMD products + MORE available at my store here! https://wccaraudio.com/ Subscribe to My Youtube Channel! Over 1,000,000 subscribers strong! Turn on your notifications! http://www.youtube.com/meade916 Follow My Instagram! Daily live feeds from the shop, exclusive content way before it hits my Youtube channel...and little squares with photo's in them http://www.instagram.com/meade916 The Official SMD Facebook fan Page https://www.facebook.com/SteveMeadeDesigns/ Follow my Tweet (Twitter) http://www.Twitter.com/meade916 Link to comment Share on other sites More sharing options...
meade916 Posted May 9, 2012 Author Report Share Posted May 9, 2012 2 Quote All SMD products + MORE available at my store here! https://wccaraudio.com/ Subscribe to My Youtube Channel! Over 1,000,000 subscribers strong! Turn on your notifications! http://www.youtube.com/meade916 Follow My Instagram! Daily live feeds from the shop, exclusive content way before it hits my Youtube channel...and little squares with photo's in them http://www.instagram.com/meade916 The Official SMD Facebook fan Page https://www.facebook.com/SteveMeadeDesigns/ Follow my Tweet (Twitter) http://www.Twitter.com/meade916 Link to comment Share on other sites More sharing options...
meade916 Posted May 9, 2012 Author Report Share Posted May 9, 2012 before you tell me the woofer is off-center, let me tell you that i did that on purpose. Due to the way the trunk is and where the baffle meets the metal behind the seat, i needed to raise it as high as i could. Also, with that angle, i needed to make sure the magnet wasnt going to hit the bottom of the box. I will cut JUST enough metal to let the port and woofer breath into the cabin. Then i will seal the cabin from the front of the baffle........BASSSSSS!!!! 3 Quote All SMD products + MORE available at my store here! https://wccaraudio.com/ Subscribe to My Youtube Channel! Over 1,000,000 subscribers strong! Turn on your notifications! http://www.youtube.com/meade916 Follow My Instagram! Daily live feeds from the shop, exclusive content way before it hits my Youtube channel...and little squares with photo's in them http://www.instagram.com/meade916 The Official SMD Facebook fan Page https://www.facebook.com/SteveMeadeDesigns/ Follow my Tweet (Twitter) http://www.Twitter.com/meade916 Link to comment Share on other sites More sharing options...
95legwagon Posted May 9, 2012 Report Share Posted May 9, 2012 thats gunna be sick when its finished! lookin good so far cant wait for vids!! Quote i think there real i was looking through that guys stuff he sells and it looks like he finds stuff at auctions and just sells it Yea, it looks like someone got the mids about a month ago....shit. If I had a whole Hertz front stage my ears would jizz all over my cheeks. / LOL My Low Budget Build: Green 1995 Subaru Legacy wagon 147k- $1K headunit- pioneer premier deh-p650-$25 4 Lead acid batts. 1 up front and 3 in back- vented outside.- $50 4 vvme L11 10"s <- $30 shipped a piece 6 cu. ft box (after displacment) tuned to 32ish hz with 10 inch sonotube. -about $50 all together maybe a lil more 2 aspm 1300 strapped Selenium 6"s in the front doors on headunit power- for now -$20 quantum tweets in door-for now -$10 boston acoustic 5 1/4 in rear doors- for now-Free big 3 1/0 and 4awg throughout. roof sound deadened (not peel n seal ftw)-free on 80 amp alt (bench tested to put out 100 amps faithfully) <--?-$10 for test about $430 for everything<----Not bad at all still gotta add 3 way crossover, amp for front and rear door speakers and maybe eq Link to comment Share on other sites More sharing options...
KillaCam Posted May 9, 2012 Report Share Posted May 9, 2012 Looking good Quote And the fact more than one person agrees does not make it a circle jerk, it makes it a bukkake scene and you're in the middle Chick took 3 shots of Jager, and then, pissed in my mouth.. B5 Passat Build Log Link to comment Share on other sites More sharing options...
spl audio1 Posted May 9, 2012 Report Share Posted May 9, 2012 thats a serious box man , Quote Link to comment Share on other sites More sharing options...
hertz2beloud Posted May 9, 2012 Report Share Posted May 9, 2012 The box looks great. I wish I lived closer so you could build my next box for my teggy. Quote Link to comment Share on other sites More sharing options...
kookz Posted May 9, 2012 Report Share Posted May 9, 2012 Loud and fast Quote Walled Police Interceptor Four 15s 160s Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.