knowledge Posted June 7, 2012 Report Share Posted June 7, 2012 lots of work went into it for a nice, simple clean job. good shit steve. also how are u going to attach it to the lid? Quote REFF'SMy linkEBAYhttp://feedback.ebay...ck&myworld=trueI love car audio so much because I will never be done. I can never win, and I will never get it finished or perfect. It always has me coming back for more, I can never get my fill of it, but I get what I need. Link to comment Share on other sites More sharing options...
2TUF4U Posted June 7, 2012 Report Share Posted June 7, 2012 Awwwsome Steve, Excellento, Tumeke, can't wait to see the finished product, and I can't wait to get my new DD1, yeeahh Quote SOUNDSTREAM Logo. (I love it!)"BUILD UNDER CONSTRUCTION"'SMD INSPIRED'Vehicle: 1994 FORD FALCON FUTURA Head unit: Soundstream VR-931NB 9.3" TouchscreenSoundstream SPLX-152-HX 1250W RMS Soundstream DTR1.3400 @ 0.5 ohmSoundstream DTR1.900 Mono Amp (8"sub)Soundstream R3.8 500W RMS 2-Ohm-(Rear Shelf)2x Soundstream DTR4.500 Amp-(Front and Rear doors.)2xSoundstream RF-60C " 2-WAY Reference (Front and Rear Doors)Soundstream DTR4.680 Amp (4"Front Door speakers & 6x9's- Rear shelf.)Soundstream Tarantulas 6x9's 150W - (Rear Shelf) Soundstream Tarantulas 4 inch 85W -(Front Doors)Dynamat Equipped- Doors and from back seat to back of boot Soundstream TWS.3 -tweeters on Front dash. FatMat -roof alignedKnukonceptz RCA's Knukonceptz & Stinger distribution blocks KnuKonceptz Kolossus Flex 1/0 Gauge Blue-Power 2x runs of 1/0 Gauge from front to rear.KnuKonceptz Kolossus Flex 1/0 Gauge Black-GroundKnuKonceptz Karma Twisted Pair 8 Gauge Speaker Cable-SubsKnuKonceptz Karma Twisted Pair 12 Gauge Speaker Cable- 6x9's/6.5'sKnuKonceptz Karma Twisted Pair 16 Gauge Speaker Cable-4"& Tweeters SMD VM-1Soundstream 600amp SCELL will be upgrading 2x bigger Batteries Big 3 Up. 2x Excessive Amperage 300amp alternators. Link to comment Share on other sites More sharing options...
n8ball2013 Posted June 7, 2012 Report Share Posted June 7, 2012 Nice idea throwing it on the trunk lid! However I am not envious of you having to run all the wires to integrate it into the factory system up to it (unless the stock system is fiber optic which would mean less of a wiring nightmare haha) if the factory amp is in the trunk it shouldnt be that difficult at all. probably easier. Quote THERE IS NO BUILD LOG! 1998 Chevy Silverado ext cab Alpine CDA-9887 4 Team Fi 15s 2 Ampere Audio TFE 8.0 2 Ampere Audio 150.4 3 Digital Designs CS6.5 component sets Dual Mechman 370XP Elite alternators inbound! 8 XS Power d3400 6 XS power d680 Second Skin Stinger Tsunami Wiring Sky High A Real Voltmeter not a piece of shit stinger. Link to comment Share on other sites More sharing options...
Sinewave Posted June 7, 2012 Report Share Posted June 7, 2012 I like the trick of adding pigment to your resin...It would help gauge saturation, and air pockets. Im adding that to the tool belt. How are you going to route the RCA outputs from your 3Sixty to your amps?...the panels that cover your trunk lid hinges look to have tight tolerences. Are you going to run them inside of the hinges?? Quote I may not slam trunks anymore....but my trunk still slams. Link to comment Share on other sites More sharing options...
bumonskateboard6 Posted June 8, 2012 Report Share Posted June 8, 2012 Nice idea throwing it on the trunk lid! However I am not envious of you having to run all the wires to integrate it into the factory system up to it (unless the stock system is fiber optic which would mean less of a wiring nightmare haha) if the factory amp is in the trunk it shouldnt be that difficult at all. probably easier. I knew that one I just meant running all the wires alongside/through the trunk arms to the trunk lid could be annoying. Quote Current Systems: 2011 BMW 335i Hertz HDP1 DC LVL3 12" Full Carbon Fiber 2002 Acura TlKenwood DNX9980HD2 DCLVL4 12" Subs with LVL5 Parts D.7 CoilsDC 3.5kHertz HSK-165 up front HCX-165 RearHertz HDP4 AmpDC Power Engineering 260 Amp AltBig 3 and amp powered with KNU 1/0XS Power D2400 Up Front i pulled out my dick in class many of times and had it shown. get over it bitch...stupid open legged hairy beavered bitch... going over rms = smaller box, under rms = bigger box... Low voltage doesn't blow amps. That's a myth. A router that does the sub holes makes rounded edges also? Link to comment Share on other sites More sharing options...
Sinewave Posted June 8, 2012 Report Share Posted June 8, 2012 I knew that one I just meant running all the wires alongside/through the trunk arms to the trunk lid could be annoying. Agreed!! Quote I may not slam trunks anymore....but my trunk still slams. Link to comment Share on other sites More sharing options...
gally Posted June 9, 2012 Report Share Posted June 9, 2012 great build....and i like how you did the trunk... may I ask what type of wood do you use for making boxes??? Quote 2010 Chevrolet Cruze Radio --- pioneer mvh-200vbt Front/back --- alpine type s 6.5" Sub Control --- Pac LC1 Sub Amp --- GZPA 1.4K Sub --- GZNW 15XSPL D1 Battery - GZBP 12.2500X Link to comment Share on other sites More sharing options...
sprkn_ranger Posted June 9, 2012 Report Share Posted June 9, 2012 great build....and i like how you did the trunk... may I ask what type of wood do you use for making boxes??? MDF...I believe he used 1" thick on this. Except the bottom piece which was 3/4" iirc. Quote Check out my build log! 4 Havocs in a blowthrough http://www.stevemeadedesigns.com/board/topic/187506-sprkn-rangers-blowthrough-build/ Link to comment Share on other sites More sharing options...
meade916 Posted June 9, 2012 Author Report Share Posted June 9, 2012 Fiberglassed over the fleece to make it strong and then applied Rage Extreme. (aka Bondo, but not "Bondo") Add this to the list of things that will be upholstered to match the interior. Now i am on to some wiring. The positive terminal on the alternator could NOT get any harder to get too. I actually cut a 12mm craftsmen wrench in half and wrapped it in electrical tape to get the job done and not short out the wire. Needless to say, my arms are sore, but i got it done! Quote All SMD products + MORE available at my store here! https://wccaraudio.com/ Subscribe to My Youtube Channel! Over 1,000,000 subscribers strong! Turn on your notifications! http://www.youtube.com/meade916 Follow My Instagram! Daily live feeds from the shop, exclusive content way before it hits my Youtube channel...and little squares with photo's in them http://www.instagram.com/meade916 The Official SMD Facebook fan Page https://www.facebook.com/SteveMeadeDesigns/ Follow my Tweet (Twitter) http://www.Twitter.com/meade916 Link to comment Share on other sites More sharing options...
meade916 Posted June 9, 2012 Author Report Share Posted June 9, 2012 Quote All SMD products + MORE available at my store here! https://wccaraudio.com/ Subscribe to My Youtube Channel! Over 1,000,000 subscribers strong! Turn on your notifications! http://www.youtube.com/meade916 Follow My Instagram! Daily live feeds from the shop, exclusive content way before it hits my Youtube channel...and little squares with photo's in them http://www.instagram.com/meade916 The Official SMD Facebook fan Page https://www.facebook.com/SteveMeadeDesigns/ Follow my Tweet (Twitter) http://www.Twitter.com/meade916 Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.