john253a Posted June 23, 2012 Report Share Posted June 23, 2012 put it at the window and kerf or flare the leading edge, it you want Link to comment Share on other sites More sharing options...
alaskanzx5 Posted June 23, 2012 Author Report Share Posted June 23, 2012 what do you mean by leading edge? t1500bdcp 2 t2d4 15" 1 t600.4 1 t400.2 1 set p1 tweets singer alt, tons of wiring, smd vm-1, 80prs, back seat delete, still in the works, aiming for a 145-147 with the ability to play 25hz up to 50hz. Link to comment Share on other sites More sharing options...
john253a Posted June 23, 2012 Report Share Posted June 23, 2012 Link to comment Share on other sites More sharing options...
alaskanzx5 Posted June 23, 2012 Author Report Share Posted June 23, 2012 i see so flare the side of the port closest to the front of the car. t1500bdcp 2 t2d4 15" 1 t600.4 1 t400.2 1 set p1 tweets singer alt, tons of wiring, smd vm-1, 80prs, back seat delete, still in the works, aiming for a 145-147 with the ability to play 25hz up to 50hz. Link to comment Share on other sites More sharing options...
Lbox88 Posted June 23, 2012 Report Share Posted June 23, 2012 If you do a design like that, you definitely need to paint the baffle red, put angry eyebrows between the subs, and use either a sharpie or paint to make a bubble off the port that says "OH YEAH!" Lol. UBL | Build Log Link to comment Share on other sites More sharing options...
STEvil Posted June 23, 2012 Report Share Posted June 23, 2012 or paint it green like a minecraft creeper MickyMcD - "Capable of making some serious trouser flapping volumes at where's-my-testicles frequencies, the Servo-Drives used to be fairly jaw dropping..." Any time you have have a power wire next to your frame put some rubber hosing (or cut up an innertube) around it. The wire is bound to wiggle (due to driving or flex) and the casing will eventually wear through. Hammerdown... 1% no links to outside websites, business related FB/YT pages allowed. Link to comment Share on other sites More sharing options...
bassface Posted June 23, 2012 Report Share Posted June 23, 2012 Any reason you dont use a round port? Link to comment Share on other sites More sharing options...
john253a Posted June 23, 2012 Report Share Posted June 23, 2012 To use aero ports you'll need either 5x4" or 2x6" 6" aero may come close to fitting as there are 9" in od with a bit of trimming But 5x 4" will just look shit and harder to fit Myself idd still want more port on thoes suckers Idd want 60-65 on aero and 78-82 on slot and 4.5 net Or if on a smaller box 19sq" per slot ad 16sq" per ft for aero Link to comment Share on other sites More sharing options...
RooTxBeeR Posted June 23, 2012 Report Share Posted June 23, 2012 Also for those that havent noticed, his original design from sketch up to torres didnt have the box clicked for subs up, in some cases this will change thing based on where your port is located. On 11/20/2012 at 8:54 PM, AMI CUSTOMS said: Turned mine up today at a light, guy next to me his steering wheel started moving and he looked over at me like I was a magician lol. On 5/9/2012 at 8:45 PM, skittlesRgood said: fuck the plating. look at what the main metal used is. you could buy unicorn blood plated terminals but if its just covering up dog shit, whats the point On 4/10/2013 at 12:26 PM, mrd6 said: I'll admit, half way through sanding that fiberglass in the rain and cold while I was all itchy I was definitely starting to question why i was doing this haha Soon To Be '04 Ford Escape US Alternator 280A Hairpin D4800 Under the Hood (6) XP3000's in Rear 1/0 SHCA & XS Power 4 runs to back TORK2 kit from Tony @ CE Auto Supply Pioneer DEH-80PRS DD AW6.5 (2) per door *Tweeter Unkown* DD SS4a & C3d (2) SCV4000 @ .5Ohm (2) 15" Sundown Zv5 Link to comment Share on other sites More sharing options...
alaskanzx5 Posted June 23, 2012 Author Report Share Posted June 23, 2012 ^^ its does make a difference. i thought i cliked it but i guess not. @ lbox88 - that would actualy be funny to see. im thinking instead of oh yeah to put WHAT?!! CANT HEAR YOU. i would go bigger if i could but i realy dont think i can. unless i get my windows tinted first. i dont want people snooping around my car. i work at night and the car sits in an empty parking lot all night. i look out at it about every hour but none the less im trying to keep it all in the hatch to were the hatch cover will still fit and i can still get the amp(s) and atleast 1 battery in there.also im trying to keep it to were if i get a flat all i have to do is slide the whole setup on the back of the back seats to get to the spare. i should have some time today to see if i can squeze some more height and make sure the width will fit. t1500bdcp 2 t2d4 15" 1 t600.4 1 t400.2 1 set p1 tweets singer alt, tons of wiring, smd vm-1, 80prs, back seat delete, still in the works, aiming for a 145-147 with the ability to play 25hz up to 50hz. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.