viper1315 Posted August 26, 2012 Report Posted August 26, 2012 Ok this has been on my mind a lot lately. on my box i built. i am wondering should i round the edges on the port and paint it again? Will i see a big difference is sound and loudness or should i keep it the same. anyones input will be great. Thank you 2001 GMC Sierra DC Audio Build =http://www.stevemead...o-level-4-build 2001 GMC Sierra XSPower D3400 Pioneer AVHD 1400 MB Quart Component Sets Pioneer 5x4s Audiotechnix Power Wire, Speaker Wire, Sound Deadener DC Audio Level 4 10s DC Audio 3.5k Rocford Fosgate R400-4 HID 6k Slammed Truck on 20s Candy Blue.
Joe X Posted August 26, 2012 Report Posted August 26, 2012 Aero ports are the way to go if you want a noticeable performance difference, if your port area was correctly set you won't really win a lot.
viper1315 Posted August 26, 2012 Author Report Posted August 26, 2012 I rounded the port edge inside the box and it is nice and smooth but i guess we will see what happens when i play it. its all glassed on the inside and has dowels. 2001 GMC Sierra DC Audio Build =http://www.stevemead...o-level-4-build 2001 GMC Sierra XSPower D3400 Pioneer AVHD 1400 MB Quart Component Sets Pioneer 5x4s Audiotechnix Power Wire, Speaker Wire, Sound Deadener DC Audio Level 4 10s DC Audio 3.5k Rocford Fosgate R400-4 HID 6k Slammed Truck on 20s Candy Blue.
tacomaguy1 Posted August 26, 2012 Report Posted August 26, 2012 Won't notice a difference Team Flex Issues
SnowDrifter Posted August 26, 2012 Report Posted August 26, 2012 I round all my edges, but not for performance or anything. I do it so there is less of a chance of the mdf peeling apart on the corner. ~~~~~~~~SAY NO TO PHOTOBUCKET~~~~~~~~ Snow's DD-1 tracks here: https://www.stevemeadedesigns.com/board/topic/167433-snows-dd-1-tracks/ My take on OFC vs CCA: https://www.stevemeadedesigns.com/board/topic/110381-things-that-piss-you-off-in-the-car-audio-world/?do=findComment&comment=2461444
john253a Posted August 27, 2012 Report Posted August 27, 2012 I also to the same as snowdrifter, and for the same resions, I also round all the outside edges, because I'm not chasing numbers and like a clean look
fecupe2001 Posted August 27, 2012 Report Posted August 27, 2012 i´ve gained a few tenths on the meter by doing this , are you going to hear a difference? no!! I´m the SPL Gains topic creator!! wanna get louder?? check this: SPL Gains. Panamenian 2009 & 2010 & 2014 Bass Race 149.9 Champion! 2 15" subs and a 2K wired at 1 ohm, http://www.stevemeadedesigns.com/board/topic/167788-fecupe2001-2-15s-on-a-2k-video-on-page-3/ 8 Massive 15" subs and small power, http://www.stevemeadedesigns.com/board/topic/179296-fecupe2001s-8-15s-4th-order-bandpass-wall/
Recommended Posts
Archived
This topic is now archived and is closed to further replies.