Skrilla Posted January 25, 2013 Report Share Posted January 25, 2013 Just thought it would be kind of cool to see where everybody sets their bass knob at while tuning with the DD-1. I've also seen a few people ask this question. I set my bass knob around 3/4 of the way up. -10db track. 2 HDC3 18's AQ2200D Link to comment Share on other sites More sharing options...
DTS909 Posted January 25, 2013 Report Share Posted January 25, 2013 All the way. VM-1 Pioneer DEH-80PRS Hertz HSK 165XL Arc Audio KS 300.2 Linear Power 1002 Full Mods Fi Audio Q 10s Sundown Audio Scv 3000 Big 3 XS Power D5100 Juice Box 20AH Singer Alternator Sky High Wire <p>My Ebay feedback. http://feedback.ebay...tab=AllFeedback Link to comment Share on other sites More sharing options...
SLAYER1805 Posted January 25, 2013 Report Share Posted January 25, 2013 All the way up and then tune it Link to comment Share on other sites More sharing options...
Noel989 Posted January 25, 2013 Report Share Posted January 25, 2013 All the way up and then tune it This Build Log - http://www.stevemead...-cruiser-el-pt/ Link to comment Share on other sites More sharing options...
BassMunky Posted January 25, 2013 Report Share Posted January 25, 2013 bass knob or gain knob? hmmm soo what does everyone set there with the rf amps? or you dont use them cause it only set at a 40zh Shakin not Stirred....my buildhttp://www.stevemead...ngle-cab-build/412 CVX And put a sealed enclosure in your trunk cut a hole in your deck and call it ported Link to comment Share on other sites More sharing options...
SnowDrifter Posted January 25, 2013 Report Share Posted January 25, 2013 All the way ~~~~~~~~SAY NO TO PHOTOBUCKET~~~~~~~~ Snow's DD-1 tracks here: https://www.stevemeadedesigns.com/board/topic/167433-snows-dd-1-tracks/ My take on OFC vs CCA: https://www.stevemeadedesigns.com/board/topic/110381-things-that-piss-you-off-in-the-car-audio-world/?do=findComment&comment=2461444 Link to comment Share on other sites More sharing options...
CNF Kevosinn Posted January 25, 2013 Report Share Posted January 25, 2013 It kinda depends on the knob to be honest. I would say its definatly different with a PAC lc1 than a gain knob *** SuperSeller Status Verified *** ( http://www.stevemeadedesigns.com/board/topic/25829-super-sellers-buyers/ ) "kevosinn's" astro van 8 custom Sundown Zv4 18's 4 Sundown scv 6000's CNF Distribution CNC parts Skyhigh wire some batteries SMD Meters and tools used on the installhttp://www.stevemeadedesigns.com/board/topic/172877-kevosinns-vanwest-coast-skyhigh-car-audio-vehicle/ 16,000 watt walled silverado build.http://www.stevemeadedesigns.com/board/topic/161965-walled-silverado-4-hdc4-15s-4-crescendo-3500s-and-much-more/ 8,000 watt 1999 Subaru legacy outback. Build log here: http://www.stevemead...ru/page__st__60TEAM CNF Distribution Link to comment Share on other sites More sharing options...
Alvi45 Posted January 25, 2013 Report Share Posted January 25, 2013 All the way up on the bass knob and all the way down on the gain if im going to be using the dd-1 to tune the amp Link to comment Share on other sites More sharing options...
StoneCold455 Posted January 25, 2013 Report Share Posted January 25, 2013 I tuned mine with my LC-1 at half. Mostly because it's what the instructions say to do and so i have some room to breathe Link to comment Share on other sites More sharing options...
BassMunky Posted January 25, 2013 Report Share Posted January 25, 2013 what?^ Shakin not Stirred....my buildhttp://www.stevemead...ngle-cab-build/412 CVX And put a sealed enclosure in your trunk cut a hole in your deck and call it ported Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.