revoracing247 Posted April 19, 2013 Report Share Posted April 19, 2013 just looking at possibly buying a 6.5" sub to mock up designs with easily and experiment with stuff. i haven't looked around a ton but looking for something pretty cheap and a low fs, basically as close to 30hz fs as you can get. (not sure if there is any) anyone have some good suggestions on what/where to look? any comments or anything is much appreciated! I think you have a bit of truck stuck in your mud bro ~Ford Ranger, ext cabKenwood DDX4701/0ga stinger wiring for big 31/0ga ofc flextech wiring 3 kinetik 800's AQ2200 @1ohm Sundown Audio X15 in a 27Hz tuned ported box LE BUILD LOG!!! Link to comment Share on other sites More sharing options...
CleanSierra Posted April 19, 2013 Report Share Posted April 19, 2013 Check Dayton or Tang Band from Parts Express. Im not the one you want to try to troll. Just a fyi for you. Link to comment Share on other sites More sharing options...
Max1636 Posted April 19, 2013 Report Share Posted April 19, 2013 Pete from PWK Designs was using a 6.5" in a T-Line enclosure, I'm not sure who makes it but it fooled people into thinking it was two twelve's. (Old Car) 1995 Volkswagon Golf MK3 2.0L: Fi SP4 18 On A DC Audio 3.5K In A PWK Box Hertz DSK 6" Speakers, Clarion HU 3x Fullriver 120aH AGM's, 225A Alt 2012 Subaru BRZ: Audison Prima APK 163 Bit One, Rockford Amps, Audison Sub Link to comment Share on other sites More sharing options...
john253a Posted April 19, 2013 Report Share Posted April 19, 2013 +1 on the tang band if you have a bit more to spend dd Link to comment Share on other sites More sharing options...
john253a Posted April 19, 2013 Report Share Posted April 19, 2013 Pete from PWK Designs was using a 6.5" in a T-Line enclosure, I'm not sure who makes it but it fooled people into thinking it was two twelve's. http://youtu.be/u8yArcObFZI its a Hybrid Audio Imagine I6SW Link to comment Share on other sites More sharing options...
Watch the bass Posted April 19, 2013 Report Share Posted April 19, 2013 http://www.stevemeadedesigns.com/board/topic/164798-chasing-some-6-or-65-subs-not-mid-drivers/ "in the abundance of water, the fool is thirsty" Bob Marley Link to comment Share on other sites More sharing options...
revoracing247 Posted April 19, 2013 Author Report Share Posted April 19, 2013 Pete from PWK Designs was using a 6.5" in a T-Line enclosure, I'm not sure who makes it but it fooled people into thinking it was two twelve's. http://youtu.be/u8yArcObFZI its a Hybrid Audio Imagine I6SW i've actually been watching all his videos lately haha it's inspired me to try to do some testing and stuff on my own. and yeah i don't have the money for that sub lol Check Dayton or Tang Band from Parts Express. looks like the TB W6-1139 might be a good fit for what im looking and not too bad on the price either. i mean an fs of 35hz for a 6.5" sub lol that's pretty good I think you have a bit of truck stuck in your mud bro ~Ford Ranger, ext cabKenwood DDX4701/0ga stinger wiring for big 31/0ga ofc flextech wiring 3 kinetik 800's AQ2200 @1ohm Sundown Audio X15 in a 27Hz tuned ported box LE BUILD LOG!!! Link to comment Share on other sites More sharing options...
revoracing247 Posted April 19, 2013 Author Report Share Posted April 19, 2013 http://www.stevemeadedesigns.com/board/topic/164798-chasing-some-6-or-65-subs-not-mid-drivers/ and sorry, didn't mean to make almost the same exact thread lol though im looking for something to use to mock up wave guide enclosures, so was asking a little different qualities out of the sub. I think you have a bit of truck stuck in your mud bro ~Ford Ranger, ext cabKenwood DDX4701/0ga stinger wiring for big 31/0ga ofc flextech wiring 3 kinetik 800's AQ2200 @1ohm Sundown Audio X15 in a 27Hz tuned ported box LE BUILD LOG!!! Link to comment Share on other sites More sharing options...
matt scarlett Posted April 19, 2013 Report Share Posted April 19, 2013 Pete from PWK Designs was using a 6.5" in a T-Line enclosure, I'm not sure who makes it but it fooled people into thinking it was two twelve's. I was quotes as having (amongst others) 2 x 10 on 500 watts + 3 x 10 on 500 watts + My Experiments with the I6SW - Cheap it ani't worth it, it is!! On the strenght of PWK's 'Just Imagine Video' i've worked with the Hybrid Audio I6SW sub. My First Build For the Hybrid Audio I6SW subwoofer - 1.75" line terminus - hit really loud PWK is right, the I6SW doesn't seal very well, so i fabricated a rubber gasket (below) Link to comment Share on other sites More sharing options...
matt scarlett Posted April 19, 2013 Report Share Posted April 19, 2013 44" Straight T-line for Hybrid Audio I6SW with broken flush trim bit - 3" line terminus if my memory serves me right Rehashed 8" enclosure ... modified for Hybrid Audio I6SW subwoofer L T-line for Hybrid Audio I6SW - around 32-35 Hz if my memory serves me right - 2.25" line terminus Taken with my phone on the wrong setting. Sorry! 39" T-line for Hybrid Audio I6SW SQ and SQL Both around low 30's - 2" and 2.5" line terminus Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.