Jump to content

Recommended Posts

Posted

Yeah I know they make it..but we are cheap at work and don't buy the "fancy" stuff! haha ;) Like I said we mostly use stick welding for almost all the heavy equipment welding we do around here and dont use this wire feed much except around the shop for little crap here and there...also have serveral trucks around the yard that have nice welders on them but...I'm sure once I get into it I'll come around to investing in nicer stuff!

your little lincoln has flux core in it... at least it did when we did your exhaust and battery rack.

The amp came out tits man!!!

Posted

Probably one of the most awesome things I've seen anyone do with an amp. Looks great man! :good:

Thank you sir! I'm sure that some people have done crazier things haha..seen some sweet airbrushed ones, actually I have one lol!

Dear god man! That thing is bad ass! Great great work!

Thanks bro! Glad you approve! Gotta have the scooterproval lol!

Amp came out great man!

Thanks man! I think it's pretty sweet myself actually :)

Funny how the people who have a louder system than you will usually give you a compliment about your setup because they know how much blood, sweat, time, and money you put into it. The people who criticize or try and one up you....have a p.o.s to no system at all and will tell you all about this "other" guys system! Saddley I'm sure if I meet this "other" guy...he will probably tell me he thinks your just as annoying as I think you are!

I'm not compensating, just proud of fabricating!

My build log: 10k center console with 4 DC Audio XL 10's powered by 2 DC Audio 5.0k amps 5 xs batteries and dual DC Power 300xps alts

http://www.stevemeadedesigns.com/board/topic/169404-goodvibez-04-dmax-10k-center-console-w4-xl-10s-custom-5ksit-plays/page-19

Posted

sexy amp panel

ivsmd.png

06 Trailblazer ss

2 Team shok industries tsx 18s
Phoenix Gold ''THE ONE''
2 Phoenix gold 800.4
4 crescendo mp6.
2 crescendo mp8
bass processor

Dc power 270xp

150ft 1/0 ofc sky high cable
1 juicebox lithium 0.5kwh 14v/40ah
kenwood dnx8120
BCAE1.com
YouTube channel : REaudioxxx1
build log: http://www.stevemeadedesigns.com/board/topic/160106-trailblazer-ss-xxx/

Posted

sexy amp panel

Thanks buddy ;) ;)

The direction I was heading with this :D

alrighty guys getting ready to leave the country soo dont expect any updates for a month maybe :)

Funny how the people who have a louder system than you will usually give you a compliment about your setup because they know how much blood, sweat, time, and money you put into it. The people who criticize or try and one up you....have a p.o.s to no system at all and will tell you all about this "other" guys system! Saddley I'm sure if I meet this "other" guy...he will probably tell me he thinks your just as annoying as I think you are!

I'm not compensating, just proud of fabricating!

My build log: 10k center console with 4 DC Audio XL 10's powered by 2 DC Audio 5.0k amps 5 xs batteries and dual DC Power 300xps alts

http://www.stevemeadedesigns.com/board/topic/169404-goodvibez-04-dmax-10k-center-console-w4-xl-10s-custom-5ksit-plays/page-19

Posted

I finished up the build log here

http://www.stevemeadedesigns.com/board/topic/187434-my-custom-smdc-50k/

You can see more details there but the amp actually has holes drilled into the positive and negative blocks inside the amp...FROM THE FACTORY!!

but I'll upload a better pic of what I mean as far as the speaker wire lead...i'll scrape the goo off of the inside they use to protect the speaker leads internally and solder to that..but heres a better pic...the build log for it has one but its kind blurry

2014-05-23_13-02-01_184_zps2a453501.jpg

closer look

2014-05-23_13-03-16_5_zps28117d61.jpg

Hope this helps :D Like I said it came this way drilled and tapped will have to solder to the remote turn on and speaker lead but I'm not worried about that part should be fairly easy..if it doesnt take then I'll do what scooter said and run wires outside the amp and plug them in that way..if all works out should only have the led wires sticking out only because they need a controler to work and with two amps it just makes sence ;) if you ran one 10 you could wire it in though...just sayin ;)

I think he drilled the power and ground blocks from inside and tapped them, and then the speaker wires are coming out of the side I believe for the OM-1. I'm sure he'll correct me if I'm wrong. It's a sick ass design. I'm gonna steal it for mine............ :peepwall:

haha go ahead bro! Also thanks! little pricey but I got a few ideas on how to make things a little easier if you need to you know your always free to pm...that goes for everone ;)

Funny how the people who have a louder system than you will usually give you a compliment about your setup because they know how much blood, sweat, time, and money you put into it. The people who criticize or try and one up you....have a p.o.s to no system at all and will tell you all about this "other" guys system! Saddley I'm sure if I meet this "other" guy...he will probably tell me he thinks your just as annoying as I think you are!

I'm not compensating, just proud of fabricating!

My build log: 10k center console with 4 DC Audio XL 10's powered by 2 DC Audio 5.0k amps 5 xs batteries and dual DC Power 300xps alts

http://www.stevemeadedesigns.com/board/topic/169404-goodvibez-04-dmax-10k-center-console-w4-xl-10s-custom-5ksit-plays/page-19

Posted

Holy shit good work!!! How Did I Miss this ?????? I wish I had half the tools and space to get creative like that ;) Keep up the good work!!! Sub'd

2011 Nissan Altima aka Red Ruby

HEADUNIT: Pioneer AVH X2700BS

ELECTRICAL:

-Singer 230a

-Northstar gr34

-(2) Northstar SMS220 w/ Custom Terminals from 12V Metalworkz

-100% Welding Cable

FRONT STAGE:
-(2 Sets) Hertz HSK165

-Hertz HSK130

-Ampere Audio 125.4

SUB STAGE:

-(3) Sundown Audio SA REV2 12's

-Ampere Audio 3800.1 V2

MISC (NON AUDIO RELATED):

-Interior & Exterior Lights LED

-Gloss Black Roof (PAINTED)

-15% Front, 5% Rear Tint

-Roof Spoiler

-20" TSW Snettertons (20x8.5 front, 20x10 rear)

-Custom Projector Retrofit (FX-R 3.0, 6.5k HID, Morimoto Mini H1 (faux projector), Quad Starry Night Halos) ----- COMING SOON!!

-Aftermarket Fog Lights

-Custom Painted Engine Covers

My Build Log: http://www.stevemeadedesigns.com/board/topic/169869-woods-2011-altima-aka-red-ruby-new-video-more-updates/page-109

Retrofit Build Log: http://www.stevemeadedesigns.com/board/topic/185787-hid-projector-retrofitting-diy-by-wood/#entry2765346

Posted

Holy shit good work!!! How Did I Miss this ?????? I wish I had half the tools and space to get creative like that ;) Keep up the good work!!! Sub'd

Thanks bro! Yeah helps having some space at work and at home to do all this for sure, stick around things will continue to get interesting I promise ;)

Funny how the people who have a louder system than you will usually give you a compliment about your setup because they know how much blood, sweat, time, and money you put into it. The people who criticize or try and one up you....have a p.o.s to no system at all and will tell you all about this "other" guys system! Saddley I'm sure if I meet this "other" guy...he will probably tell me he thinks your just as annoying as I think you are!

I'm not compensating, just proud of fabricating!

My build log: 10k center console with 4 DC Audio XL 10's powered by 2 DC Audio 5.0k amps 5 xs batteries and dual DC Power 300xps alts

http://www.stevemeadedesigns.com/board/topic/169404-goodvibez-04-dmax-10k-center-console-w4-xl-10s-custom-5ksit-plays/page-19

Archived

This topic is now archived and is closed to further replies.

  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Who's Online   0 Members, 0 Anonymous, 291 Guests (See full list)

    • There are no registered users currently online
×
×
  • Create New...