Budlight863 Posted August 26, 2013 Report Share Posted August 26, 2013 Just a quick question can i put the i-bar 555 on the xs power d3100 battery thanks Quote Link to comment Share on other sites More sharing options...
kickass audio Posted August 26, 2013 Report Share Posted August 26, 2013 No you cannot put it on the d3100. The ibar you can put on the 3100 is the 556 and 554. Are you trying to stuff a 3100 in your engine? Quote 2004 GMC Envoy1 XS power S3400 batt under the hood and 4 XS Power D3100's battery installed in the rear by the amps0 gauge power wire from front to backAlpine iva-w205 touchscreen dvd/cd/mp3/ipod/am/fm/gps headunitSundown Audio SAX-200.4 amp for my mids and highs8 gauge speaker wire from amp to woofer270 amp Mechman AltRockford Fosgate T1652-s component speakersRockford Fosgate 3Sixty.2 sound processorRca's from Rockford Fosgate and Monster Cable14 gauge speaker wire for the mids and highs1 18" Ascendant Audio SMD Dual 1 ohm with custom Black & Blue carbon fiber and hand signed dustcapBox: 5.66 cubic feet net volume box tuned to 30.13Hz with 1.5" wide wooden dowels and 1.5" thick baffle1 DC Audio 5.0k amp wired to .5 ohms nominal with an imp rise of 1.35 ohms for the single AA SMD 18"Future Vision 8000k 50w bi-xenon projector HID's with 4300k 35w fog lightsLink to my build: Buildupdates/progress Link to comment Share on other sites More sharing options...
Budlight863 Posted August 26, 2013 Author Report Share Posted August 26, 2013 Thanks for the help yes i want to put it in my 05 f150 i took the windshield fluid container pff and im welding a pad so i can put it there Quote Link to comment Share on other sites More sharing options...
kickass audio Posted August 27, 2013 Report Share Posted August 27, 2013 Yeah since you cant use the ibar are the OEM wires long enough to reach the top of the battery? If so just get some ring terminals on there and bolt it up. If not then I would suggest to take the stock starter, ground, alt, etc wires and upgrade them with your own wire and ring terminals. Its not that hard to do as long as your wires aren't buried in the engine. Quote 2004 GMC Envoy1 XS power S3400 batt under the hood and 4 XS Power D3100's battery installed in the rear by the amps0 gauge power wire from front to backAlpine iva-w205 touchscreen dvd/cd/mp3/ipod/am/fm/gps headunitSundown Audio SAX-200.4 amp for my mids and highs8 gauge speaker wire from amp to woofer270 amp Mechman AltRockford Fosgate T1652-s component speakersRockford Fosgate 3Sixty.2 sound processorRca's from Rockford Fosgate and Monster Cable14 gauge speaker wire for the mids and highs1 18" Ascendant Audio SMD Dual 1 ohm with custom Black & Blue carbon fiber and hand signed dustcapBox: 5.66 cubic feet net volume box tuned to 30.13Hz with 1.5" wide wooden dowels and 1.5" thick baffle1 DC Audio 5.0k amp wired to .5 ohms nominal with an imp rise of 1.35 ohms for the single AA SMD 18"Future Vision 8000k 50w bi-xenon projector HID's with 4300k 35w fog lightsLink to my build: Buildupdates/progress Link to comment Share on other sites More sharing options...
Budlight863 Posted August 28, 2013 Author Report Share Posted August 28, 2013 Thanks alot another question what is the biggest batt i can fit in the stock battery tray its supposed to be the d3400 but i dont know for shure im not putting the second bettery on the washer fluid container place im instead going to put a small toolbox the ones that go below your truck bed and putting 2 d7500 in there but want to know whats the biggest i can put in my 05 f150 battery tray Quote Link to comment Share on other sites More sharing options...
tacomaguy1 Posted August 28, 2013 Report Share Posted August 28, 2013 Measure it? All the dimensions are on the xs website Quote Team Flex Issues Link to comment Share on other sites More sharing options...
RooTxBeeR Posted August 28, 2013 Report Share Posted August 28, 2013 Measure it? All the dimensions are on the xs websitex2 get dimensions and check it out. Quote On 11/20/2012 at 8:54 PM, AMI CUSTOMS said: Turned mine up today at a light, guy next to me his steering wheel started moving and he looked over at me like I was a magician lol. On 5/9/2012 at 8:45 PM, skittlesRgood said: fuck the plating. look at what the main metal used is. you could buy unicorn blood plated terminals but if its just covering up dog shit, whats the point On 4/10/2013 at 12:26 PM, mrd6 said: I'll admit, half way through sanding that fiberglass in the rain and cold while I was all itchy I was definitely starting to question why i was doing this haha Soon To Be '04 Ford Escape US Alternator 280A Hairpin D4800 Under the Hood (6) XP3000's in Rear 1/0 SHCA & XS Power 4 runs to back TORK2 kit from Tony @ CE Auto Supply Pioneer DEH-80PRS DD AW6.5 (2) per door *Tweeter Unkown* DD SS4a & C3d (2) SCV4000 @ .5Ohm (2) 15" Sundown Zv5 Link to comment Share on other sites More sharing options...
Budlight863 Posted August 28, 2013 Author Report Share Posted August 28, 2013 Its supposed to be bci group 65 Quote Link to comment Share on other sites More sharing options...
Nathan @ XSpower Posted August 29, 2013 Report Share Posted August 29, 2013 For that much power I would suggest checking with toolmaker for a custom distro block. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.