bcbrassard Posted January 9, 2014 Report Share Posted January 9, 2014 Singer 200 amp alt, Big 3 0 AWG, Optima under hood, 2 HC1800 in trunk w/ 2 runs of RF 0 AWG to batts. Is running 0 AWG with reducers to a RF T1500BDCP a good idea. I know its not needed, but i overvkill often and looking for opinions. Mainly cons to it. Pics show what i had in mind. Link to comment Share on other sites More sharing options...
evermaxx Posted January 9, 2014 Report Share Posted January 9, 2014 Never a bad idea. Some say it doesn't add anything but more power is always better. So I'd say yes. (I run dual 0 to my AQ2200) Team Subsonic Lows Get your garbage EMF products of my amp bitch Man....it makes a nice work bench Link to comment Share on other sites More sharing options...
bcbrassard Posted January 9, 2014 Author Report Share Posted January 9, 2014 Thanks, Thats what i though... surely would hurt. Link to comment Share on other sites More sharing options...
Broke_Audio_Addict Posted January 9, 2014 Report Share Posted January 9, 2014 Only thing I would worry about is how much of that little post is actually making contact in the amp. And I don't think you will see any gain using those vs a distribution block and a short run of 4ga it does look nice and clean though. That being said a lot of people's definition of "music" is a clipped 30 hz sine wave with some 80 IQ knuckle head grunting about committing crimes and his genitals. Link to comment Share on other sites More sharing options...
alenv10 Posted January 9, 2014 Report Share Posted January 9, 2014 even if it doesnt add much, it looks 100 times better NOTHING DOWN HERE YET OBSIDIAN FTW Link to comment Share on other sites More sharing options...
Kyblack76 Posted January 9, 2014 Report Share Posted January 9, 2014 I know some say just wire is better. Someone needs to honestly test it SMD SUPER SELLER The Burban Build Blazer Build sold Acura trunk build sold Link to comment Share on other sites More sharing options...
KillaCam Posted January 9, 2014 Report Share Posted January 9, 2014 If the posts are actually sized to 4awg then I would see no cons in it. And the fact more than one person agrees does not make it a circle jerk, it makes it a bukkake scene and you're in the middle Chick took 3 shots of Jager, and then, pissed in my mouth.. B5 Passat Build Log Link to comment Share on other sites More sharing options...
bcbrassard Posted January 9, 2014 Author Report Share Posted January 9, 2014 Only thing I would worry about is how much of that little post is actually making contact in the amp. And I don't think you will see any gain using those vs a distribution block and a short run of 4ga it does look nice and clean though. I had thought of that as well. It fits in there really well and gets tight. I have extra 0 gauage thats why i am thinking about it too. Link to comment Share on other sites More sharing options...
bcbrassard Posted January 9, 2014 Author Report Share Posted January 9, 2014 Thanks for all the positive input. They are Toolmaker reducers and a slightly bigger that the RF 4 AWG in the pics. Link to comment Share on other sites More sharing options...
rockFord_Expedition Posted January 9, 2014 Report Share Posted January 9, 2014 Just make sure they don't touch! Old School/New School RF Build March 2015 SOTM Winner How to crimp large wire Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.