ChatraN Posted March 28, 2014 Report Share Posted March 28, 2014 I've updated my single 12" T-line recently, got a pair of Pioneers 10's (ts-w257D2) and adapted them in a new baffle mount. They sound pretty clear and Loud on the 35-45hz range, and peaks at the blurry's 50-51hertz ) you can feel the air moving at 30hz to 25hz Link to comment Share on other sites More sharing options...
tjennemann Posted April 4, 2014 Report Share Posted April 4, 2014 so here is how the box turned out for (2) lvl3 DC 12" subs Travis Jennemann Link to comment Share on other sites More sharing options...
Dude2800 Posted April 28, 2014 Report Share Posted April 28, 2014 Link to my build. http://www.stevemeadedesigns.com/board/topic/183363-sundown-x18-t-line/ Link to comment Share on other sites More sharing options...
Dude2800 Posted April 30, 2014 Report Share Posted April 30, 2014 Link to comment Share on other sites More sharing options...
qu1cks1lver56 Posted June 23, 2014 Report Share Posted June 23, 2014 So I'm finally rejoining the T-Line game. Since my Xterra doesn't have room for a full on T-Line I've gotten some help and will be building an offset driver tapered T-Line for a pair of Eminence LAB 12's. Fs of 22hz, I'm excited to see what kind of lows this will put out. Here's a sketchup of it. Don't mind the uncentered holes in the bracing, it probably won't be circles, just wanted to get the point across. First Gen Xterra: Always changing DNX 690HD RF 360.3RF T3002RF T4004RF T10001bdSilver Flute 6.5"s Tang Band 1" TweetersSundown X18 in 7cubes net tuned to 32hz Trust me .25 Blows your Load. Link to comment Share on other sites More sharing options...
STEvil Posted June 23, 2014 Report Share Posted June 23, 2014 looks interesting. bit overkill on the bracing for a pair of 12's. MickyMcD - "Capable of making some serious trouser flapping volumes at where's-my-testicles frequencies, the Servo-Drives used to be fairly jaw dropping..." Any time you have have a power wire next to your frame put some rubber hosing (or cut up an innertube) around it. The wire is bound to wiggle (due to driving or flex) and the casing will eventually wear through. Hammerdown... 1% no links to outside websites, business related FB/YT pages allowed. Link to comment Share on other sites More sharing options...
codyvan87 Posted June 23, 2014 Report Share Posted June 23, 2014 I'm wanting to build one of these boxes for a pair of fosgate p3 12s. I'm confused with all the math here so I was curious if someone could possibly draw up a couple designs for me. It needs to be no more than 48" wide. Height and depth are not a problem cuz its going in an suv. But the smaller the better. Would like it to be tuned around 30hz.. would be cool if each sub had its own port but not necessary. . Link to comment Share on other sites More sharing options...
gckless Posted June 23, 2014 Report Share Posted June 23, 2014 Thinkin about doing a T line for a pair of Exodus Anarchy's I have laying around, just because. Figure it should do pretty well on my DC 5k. At 16 ohms "Clipping" is the biggest forum boner now. It's like witchcraft... it automatically explains just about everything people don't understand. My build log: http://www.stevemeadedesigns.com/board/topic/200295-gckless-2011-chevrolet-impala/ High resolution photos: Gilbert Kless Photography Link to comment Share on other sites More sharing options...
dharris2488 Posted June 25, 2014 Report Share Posted June 25, 2014 Want to stay informed... Thinking about TLine'ing HDC3 12... Sorry, I haven't read all 70 pages yet, as i have to get back to work, but can I run the subwoofer's RMS power? Or will I bottom up the woofer and screw something up? I see what 300RMS on an 18 can do, I can just imagine what 1500RMS on a 12 would do... I'm willing to build, if they come.... 2013 Toyota Camry SE 240a MechMan HO Alternator 1/0 Welding Flex Cable Big 3 CT Sounds 4000.1D Kenwood XR400-4 Mid/High Amp SoundQubed Q4-120 Mid Amp Infinity Kappa 6.5 components Kappa 6x9's for rear deck fill (coming out) (4) 8" PRV 8MB450's Set of SoundQubed SuperTweets (2) DSS Ethos 12's D2's @32.5hz (building 4th order enclosure) (2) SQ HDC3 10's @ 33.5hz (current build, loving them) Pioneer AVH-X4600BT 100 sq/ft Stinger RoadKill Sound Deadner 120 sq/ft QMat Sound Deadener (4) Juice Box Black Cherries Lots and Lots of feet of SHCA wire, along with 50' of Welding 1/0 2 Runs of 1/0 Positive front to back ToolMaker Everywhere Link to comment Share on other sites More sharing options...
bbeljefe Posted June 25, 2014 Report Share Posted June 25, 2014 Want to stay informed... Thinking about TLine'ing HDC3 12... Sorry, I haven't read all 70 pages yet, as i have to get back to work, but can I run the subwoofer's RMS power? Or will I bottom up the woofer and screw something up? I see what 300RMS on an 18 can do, I can just imagine what 1500RMS on a 12 would do... I'm willing to build, if they come.... I don't see why not. I've built a number of them and I've yet to run a sub at or below it's RMS in one. Facebook: facebook.com/audioanarchyllc Instagram: audioanarchyllc Youtube: youtube.com/bbeljefe Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.