Jump to content

Recommended Posts

Posted

well got home from work on thursday after work and was enjoying a Hot cup of coffee when my duaghter came in and knocked it off my desk and onto my tower.

I built the pc back in early 04 it was truely a badass machine, Abit IC7g mobo with a intel p4 3.2ghz northwood (a very nice chip IMO) dual 10,000 74gig raptors, 2 gigs of corsair ram 600watt psu, raidon X700 pro, Creative Sound Blaster Audigy 2 ZS Platinum sound card, 11 fans I could play any game out at any resolution I wanted to and had no issues until Battlefield 2 came out.

so I shut it down as quickly as I could, got the wet vac out and got as much coffee out as I could but I guess I was'nt quick enough on cutting the power, because all I get is the blue screen of death, hard drives cant be found!!!! wont boot from any disc or nothing, mobo seems ok when boot up, I get the abit soft bios menu, ram checks out ok, voltage across the board seems normal, nothing out of wack, no errors other than the HDDs cant be seen in soft bios.

sooo.....

I need to tear it down, clean it up real good.

what do you pc junkies out there use to clean up mobos?

hope fully I can clean it up real good and buy a couple of new raptor 150 gig HDDs and be ok untill I can afford to build what I want.

Posted

electric contact cleaner.

-Installer for Duke's Car Stereo

2000 Pontiac Grand Prix - Ported Eaton M90 S/C, 3.5" pulley, XS Power Headers, 1.9 Rockers, FWI, Poly Motor Mounts, Custom Tune.

RF T1000-1bdCP and T400-4

Boston Acoustics SPG 555

Kenwood eXcelon 995

RF Punch 6.5" components and MB Quart Premium 6x9"s

Powermaster Alternator, YellowTop D34, Vmax CT1000

Posted (edited)

Have you tried a different SATA HD?

Tried the Raptors in other SATA ports on the mobo?

Tried the Raptors in a different machine?

Edited by emat19876

2015 Honda Civic LX 4dr | 110k miles | Stock

 

1996 GMC Yukon SLT 4dr 4wd | 260k miles | JVC Head-unit

Posted

if its still wet, just use compressed air and let it it dry a few days. i got a 24oz rockstar in mine thanks to a nephew and after a week or so i plugged it up and was fine.

Posted
Have you tried a different SATA HD?

Tried the Raptors in other SATA ports on the mobo?

Tried the Raptors in a different machine?

nope dont have any just layin around

yup doesnt matter same results.

dont have another machine here that supports sata.

Posted (edited)
electric contact cleaner.

thats basically denatured alcohol but in compressed air it really depends on how bad the spill is and how sticky it is. my water cooling system started leaking on my video card and it took a ton of alcohol to get that shit off cause it was so sticky.

Edited by Amalan
Posted
electric contact cleaner.

Go to ace or home depot....they have the ZERO residue cleaner....shit works great...good luck David..that shit sucks...my dog knocked a PBR into mine...sprayed it off let it chill for a while...back in action

Posted
electric contact cleaner.

Vehicle: 1997 S10 Blazer 4dr 4X4

Exterior: Rear End Bagged, Black Grill, Lifted 2"

Amplifiers: Rockford Fosgate T8004 & T10001bd

Batteries: 2 Stinger SPV35, Kinetik HC2400

Electrical: Big 3, DC Power 290amp Alternator w/ MLA at 15.5v

Enclosure: 4.2 ft³ @ 33Hz 84sq.in. of port (20sq.in. per cube)

Headunit: Eclipse CD3200 w/ 80G iPod

Mids/Highs: Rockford T152s (a-pillars), Rockford T162s (doors)

Subwoofers: 1 15" Fi BL Fully Loaded

Wire: All 1/0g Kicker Hyperflex

My YouTube Videos

My Fiberglass A-Pillar Build

My "Seamless" Looking Box Build

My DD1508 T-Line Bandpass Build "Seamless" w/ Acrylic Windows (for '05 TrailBlazer)

My Stealth 8" Fiberglass Build (for '05 TrailBlazer)

My Build For A Friend's '08 Cobalt 15" BL Sealed Off From The Trunk

My feedback/references...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Who's Online   0 Members, 0 Anonymous, 639 Guests (See full list)

    • There are no registered users currently online
×
×
  • Create New...