Ron36 Posted January 3, 2019 Report Share Posted January 3, 2019 To Nasty is talking about the D.O.D system , they make a cancellation module and it’s the smartest thing You can do to any Chevy, I’ve seen many GM’s needing engines because of the D.O.D system. Over time when it’s turning off cylinders it’s creating a vacuum on the dead cylinders and over time makes the rings roll up causing oil consumption and scaring on the cylinder walls. Seen it happen as low as 50k on the truck. 2022 Ford Maverick on 22’s Skar SK1500.1 on 4 Skar VD-8’s Mids Sundown Super tweeters, Skar TX 6.5 components on Skar SKM400.4 LC2 for audio control , XS Power D680 XS Series Extra Battery Link to comment Share on other sites More sharing options...
ToNasty Posted January 3, 2019 Report Share Posted January 3, 2019 1 minute ago, Ron36 said: To Nasty is talking about the D.O.D system , they make a cancellation module and it’s the smartest thing You can do to any Chevy, I’ve seen many GM’s needing engines because of the D.O.D system. Over time when it’s turning off cylinders it’s creating a vacuum on the dead cylinders and over time makes the rings roll up causing oil consumption and scaring on the cylinder walls. Seen it happen as low as 50k on the truck. It also makes an annoying "helicopter chop" noise when cruising. Gets super annoying. And if you dont have it shut off (especially with having headers) youll want to shoot yourself listening to it ***Super Sellers List***http://www.stevemeadedesigns.com/board/topic/25829-super-sellers-buyers Link to comment Share on other sites More sharing options...
Audio-Concepts Posted January 3, 2019 Author Report Share Posted January 3, 2019 16 minutes ago, ToNasty said: Not flex fuel. I mean afm as in 4 cylinder mode Anothet thing id do is heat wrap those headers. They are thin so you might hear the lifters. The wrap may quiet it down Oh...I had the DOD stuff turned off along with governor and my shift points tightened up and a few other odds and ends. Truck runs pretty good. The DOD stuff was useless for me unless I was sitting at a light. Even cruise control id still be in v8 mode. Pioneer AVH480 Zapco ST5XII amplifier Stevens Audio 6.5" components (passive) Onyx Subwoofer Sky High OFC wiring Link to comment Share on other sites More sharing options...
ToNasty Posted January 3, 2019 Report Share Posted January 3, 2019 6 minutes ago, Audio-Concepts said: Oh...I had the DOD stuff turned off along with governor and my shift points tightened up and a few other odds and ends. Truck runs pretty good. The DOD stuff was useless for me unless I was sitting at a light. Even cruise control id still be in v8 mode. By the way theres a brand new tru technology billet 2200 on diyma for 600 bucks. Somewhat local to me. Might have to buy it just becsuse ***Super Sellers List***http://www.stevemeadedesigns.com/board/topic/25829-super-sellers-buyers Link to comment Share on other sites More sharing options...
bcbrassard Posted January 3, 2019 Report Share Posted January 3, 2019 Header wrap would be advised, it cheap as shit and works really well. Tried to wrap them on the block...Nope. Removed system to wrap, was easy and looks good. Helps keep engine bay temps down. Link to comment Share on other sites More sharing options...
Audio-Concepts Posted January 6, 2019 Author Report Share Posted January 6, 2019 Installed the headers and ypipe this morning. Took about 4 hours but definitely worth it. Idle tone is a little louder than what it was...but damn the moment you get on it...she yells at you. Definitely a fuck load louder. Now time to save for my cam and dod delete stuff. Debating on either a TSP torquer 2 or a BTR Stage 4 truck cam. Both require a stall of at least 2800...so I will prolly do that or upgrade to a mildly built 4l60 from RPM Transmissions. So enough of the future here are pics from today. Pioneer AVH480 Zapco ST5XII amplifier Stevens Audio 6.5" components (passive) Onyx Subwoofer Sky High OFC wiring Link to comment Share on other sites More sharing options...
White Lightning Posted January 6, 2019 Report Share Posted January 6, 2019 looks like I'm gonna have to break down and dual out the Avalanche soon ... Kenwood / HELIX / Linear Power (For The Love Of Music) / Brutal Sounds / OverKill Electric Co Questions About Sound Quality ?? Try Here ... Sound Quality, What does it REALLY mean ?? SMD SOTM Winner "White Lightning" 1997 GMT400 Chevy Silverado "The Green Dickle" 1994 GMT400 Chevy "Phantom Dually" Randal's 2007 Chevy Avalanche (we haven't named this one yet) Dylan's "Brutal" 17 Chevy Cruze RS Hatch Link to comment Share on other sites More sharing options...
Audio-Concepts Posted January 6, 2019 Author Report Share Posted January 6, 2019 9 hours ago, White Lightning said: looks like I'm gonna have to break down and dual out the Avalanche soon ... Look into Speed Engineering. Kit fit really well. They make a true dual ypipe full exhaust thats bolts right up to their long tube headers. If I didnt already have the borla stuff I wouldve gone that route. They have 2 setups for the exhaust that either dump before the axle or can go full out the back. Doesnt break the bank either. My longtubes and ypipe were 415 shipped to my door. The headers I think are 300 and axle dump is another 250 I think. Pioneer AVH480 Zapco ST5XII amplifier Stevens Audio 6.5" components (passive) Onyx Subwoofer Sky High OFC wiring Link to comment Share on other sites More sharing options...
BP1Fanatic Posted January 16, 2019 Report Share Posted January 16, 2019 Nice exhaust! 2000 Toyota Solara SEV6, 200 amp alternator, Jensen VX7020, Hifonics American Warrior Taurus X, Hifonics American Warrior Centurion X, JBL Club 6500C, Power Acoustik XP2K-4102, Coustic Power Logic HT-612 in a BP4. Link to comment Share on other sites More sharing options...
Audio-Concepts Posted January 20, 2019 Author Report Share Posted January 20, 2019 On 1/16/2019 at 2:57 PM, BP1Fanatic said: Nice exhaust! Thank you! Sounds really nice too..and definitely helped mid range power delivery. Pioneer AVH480 Zapco ST5XII amplifier Stevens Audio 6.5" components (passive) Onyx Subwoofer Sky High OFC wiring Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.