Jump to content

Recommended Posts

Posted

should be. if not it should be very close to it, as in fixing the port up then mounting them then wiring. i still gotta try to get off work. ima go down the list of people today and ask. if not ima see if i can just not go. i have always had bad experiences with working those games...so maybe they'll say ok :)

i should be able to let you know somethin today

 

 

Posted

couple of updates. been workin on my friends panel so this has been slower than i wanted :( but...it's gettin close

Posted Image

:P i'm standing inside. just as an idea as to how big it is

Posted Image

Posted Image

1x2's to hold the baffle in place

Posted Image

Posted Image

since i used two different pieces of wood for the walls, i glued and screwed little pieces of wood where they meet to help seal and strengthen it. maybe not the best idea...but i didnt wanna spend another 50 bucks on wood. and this will work out ok so it's all good

Posted Image

baffle mocked in

Posted Image

bedlined painted. not as textured as i thought...but it's ok, i still like it

not much to look at...but i've been chipping away still. tomorrow i should get both baffles in, and the port in and then i should be ready to put the speakers in.

amatt...i gotta go to work to get someones number to call about sunday. so i'll let you know tonight if i'm off sunday

 

 

Posted

looks good as always!

~Matthew

1998 Toyota Camry XLE V6 3L

(1) ScyTek Astra 4000RS-2W-1 2-Way Remote Start Alarm

with Shock and Proximity

(1) 20% Tint All Around (Gately Audio)

(1) 250 Amperage HO Alternator

(1) Big 3 Done In 1/0

(2) Kinetik HC2400 Power Cell

(1) Alpine IVA-D106 Receiver

(1) Peripheral Video Bypass Device

(4) Alpine SPS-17C2 Speakers

(1) Alpine KCE-422i iPod Control Interface

(4) Sheets Dynamat Extreme; for speakers

(1) 10 Square Feet Hushmat (Trunk & Rear Deck)

(4) DC Audio Level 4 15" D2 Subwoofer w/ Level 5 Coils

(1) Wall Built By David, Tuned to 32 Hz

(1) Rockford Fosgate T40001bd Amplifier

(1) Stinger 1/0 Wiring (2 runs of + 2 runs of -)

(1) Stinger Volt Meter

Posted

lol that'd be the best reason to quit. then i think it'd be official that i'm addicted :(

EDIT: and thanks bass4lyfe :)

 

 

Posted

Thats looking great! Gotta be a relief from the fiberglass design, too! Good stuff!!

Yeah I don't even think Timmay could have wrapped that other design....well on second thought...

Vehicle: 1997 S10 Blazer 4dr 4X4

Exterior: Rear End Bagged, Black Grill, Lifted 2"

Amplifiers: Rockford Fosgate T8004 & T10001bd

Batteries: 2 Stinger SPV35, Kinetik HC2400

Electrical: Big 3, DC Power 290amp Alternator w/ MLA at 15.5v

Enclosure: 4.2 ft³ @ 33Hz 84sq.in. of port (20sq.in. per cube)

Headunit: Eclipse CD3200 w/ 80G iPod

Mids/Highs: Rockford T152s (a-pillars), Rockford T162s (doors)

Subwoofers: 1 15" Fi BL Fully Loaded

Wire: All 1/0g Kicker Hyperflex

My YouTube Videos

My Fiberglass A-Pillar Build

My "Seamless" Looking Box Build

My DD1508 T-Line Bandpass Build "Seamless" w/ Acrylic Windows (for '05 TrailBlazer)

My Stealth 8" Fiberglass Build (for '05 TrailBlazer)

My Build For A Friend's '08 Cobalt 15" BL Sealed Off From The Trunk

My feedback/references...

Archived

This topic is now archived and is closed to further replies.

  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Who's Online   2 Members, 0 Anonymous, 9148 Guests (See full list)

×
×
  • Create New...