UnderLoK Posted April 7, 2014 Author Report Share Posted April 7, 2014 A few pics! Reminder, I didn't build this or even help this time around, I pulled a JP and contracted it out... I will say though I feel for Brendon because having a customer that knows his shit and is into SPL can't be easy lol The wall Port Subs, ehh just saw the t-nut and got it out of there which kicks ass cause I thought it might have been in the sealed side! lol Amp rack without trim, I'm still working on this, long story short it's more solid than it was but still needs more work to tighten it up and secure those batteries better which will stiffen the whole thing up. Also need to setup some fans as well. With trim, still have to clean the panels and shit off little jank looking with plasti-dip all over If at first you do not succeed, you are doing it wrong! -ARSCheck out my walled TBSS build over here4 Fi Team 18s on 2 Cactus K9 DS18 doors on 2 MBQ 1Ks, Vifa pillars on a STL4.500 Pioneer X8500 6 XS Power D7500, 1 3400S Second Skin 2 270a Mechman Alts Link to comment Share on other sites More sharing options...
AA98hoe Posted April 7, 2014 Report Share Posted April 7, 2014 Feel dustcaps if there not hot it won't break if they are won't break either lol TEAM DC AUDIO VEHICLE:98 chevy tahoe 2wd 3-4 drop HEADUNIT:alpine 9886 PREAMP:arcaudio FRONT STAGE:4-6 1/2s selinium,DD component set and 4-selinium tweeters in each door KICKPANELS:jl audio 5 1/4 REAR DOORS: dd components 6 1/2s HIGHS AMPS:zapco 750.2 on front doors,zapco an another 750.2 on kicks and rear doors SUBS:4-ascendant audio 18s with 5 spiders in a custom box built by KINGSUV SUB AMP: 2-dc7.5s ALTERNATORS: 3-mechmans 1- 425comp, 1-smd spec350, 1-270 with adj voltage harness on custom dc bracket WIRE:10-runs 0g front to back BATTERIES:6-d1400s TL results:157.1 at 38hz and 156.8 at headrest score @37hz. STATE AND NATIONAL RECORD IN MECA S5. Link to comment Share on other sites More sharing options...
UnderLoK Posted April 7, 2014 Author Report Share Posted April 7, 2014 Feel dustcaps if there not hot it won't break if they are won't break either lol They get less warm in this 4th than they did in the wall... lol If at first you do not succeed, you are doing it wrong! -ARSCheck out my walled TBSS build over here4 Fi Team 18s on 2 Cactus K9 DS18 doors on 2 MBQ 1Ks, Vifa pillars on a STL4.500 Pioneer X8500 6 XS Power D7500, 1 3400S Second Skin 2 270a Mechman Alts Link to comment Share on other sites More sharing options...
Katt Posted April 7, 2014 Report Share Posted April 7, 2014 I just realized after reading and seeing videos, this is a SS. Love me some TBSS! Looks really great man! Coming to Slamology? *06 330i - Sundern x12 - saz-3500* *91 Foxbody V1 S-Trim Notch* Link to comment Share on other sites More sharing options...
SlamminBeats Posted April 7, 2014 Report Share Posted April 7, 2014 its good to see this TB improving year over year. Nice man. Hopefully this year i can hear it at gibralter. Link to comment Share on other sites More sharing options...
Ninja_v1.0 Posted April 7, 2014 Report Share Posted April 7, 2014 dis motherfucker When your at the top everyone is coming for you, friends, family, haters and even those who don't know you.. my advice.. KILL EM ALL Link to comment Share on other sites More sharing options...
UnderLoK Posted April 7, 2014 Author Report Share Posted April 7, 2014 I just realized after reading and seeing videos, this is a SS. Love me some TBSS! Looks really great man! Coming to Slamology? Always, well at least the past 4 years or 3? I forget, whatever I'll be there lol Already have our room booked at the Hampton in Brownsburg. Think the GG/DOA guys will be there as well, forget where the Canadians are staying though. its good to see this TB improving year over year. Nice man. Hopefully this year i can hear it at gibralter. Thanks man! dis motherfucker Awwwwww yiiiissssss If at first you do not succeed, you are doing it wrong! -ARSCheck out my walled TBSS build over here4 Fi Team 18s on 2 Cactus K9 DS18 doors on 2 MBQ 1Ks, Vifa pillars on a STL4.500 Pioneer X8500 6 XS Power D7500, 1 3400S Second Skin 2 270a Mechman Alts Link to comment Share on other sites More sharing options...
I.V Posted April 29, 2014 Report Share Posted April 29, 2014 nice bro good to see u step up to b-pillar im just finishing my c-pillar for mine. also your dual alt bracket its higher than other brackets made for the 6.0? cuz i bought mine for a 6.0, it fits and everything but the power steering pump gets in the way with the alt . and for any chance u still got those 6'' aeroports? they are out of stock on partsexpress thats why im using 4'' just for the moment 06 Trailblazer ss2 Team shok industries tsx 18sPhoenix Gold ''THE ONE''2 Phoenix gold 800.44 crescendo mp6.2 crescendo mp8bass processor Dc power 270xp 150ft 1/0 ofc sky high cable1 juicebox lithium 0.5kwh 14v/40ahkenwood dnx8120BCAE1.com YouTube channel : REaudioxxx1build log: http://www.stevemeadedesigns.com/board/topic/160106-trailblazer-ss-xxx/ Link to comment Share on other sites More sharing options...
UnderLoK Posted April 30, 2014 Author Report Share Posted April 30, 2014 nice bro good to see u step up to b-pillar im just finishing my c-pillar for mine. also your dual alt bracket its higher than other brackets made for the 6.0? cuz i bought mine for a 6.0, it fits and everything but the power steering pump gets in the way with the alt . and for any chance u still got those 6'' aeroports? they are out of stock on partsexpress thats why im using 4'' just for the moment I promised the aeros to a guy around here, sorry. As far as the dual alts go, no it's the same kit, but you have to remove half of the 2nd alts ear so it clears that cap. You needed to tell DC your alt was for a TBSS and they would have removed half of the ear for you as that's the only way it fits. If at first you do not succeed, you are doing it wrong! -ARSCheck out my walled TBSS build over here4 Fi Team 18s on 2 Cactus K9 DS18 doors on 2 MBQ 1Ks, Vifa pillars on a STL4.500 Pioneer X8500 6 XS Power D7500, 1 3400S Second Skin 2 270a Mechman Alts Link to comment Share on other sites More sharing options...
Dj_Scarface Posted April 30, 2014 Report Share Posted April 30, 2014 Amp rack without trim, I'm still working on this, long story short it's more solid than it was but still needs more work to tighten it up and secure those batteries better which will stiffen the whole thing up. Also need to setup some fans as well. With trim, still have to clean the panels and shit off little jank looking with plasti-dip all over making a sleeper?? why no cut out for the other amps? Working on my 93' Ford Bronco rebuild:I have:pioneer AVH-P6500Infinity Reference 6032SI frontsInfinity Reference 6832CF Rears Crescendo CZ 6.5 kicks Crescendo 1100.4 (2) DC Audio LvL 4 M2's (1) Juicebox BlackcherryPiece together amps & wiringBout to get:Crescendo Amps Crescendo Mids Crescendo Tweets Sky High Car Audio Wire Rockford Fosgate 360.2 or .3 My Buildhttp://www.stevemeadedesigns.com/board/topic/97426-93-ford-bronco-rebuild-full-system-body-paint/ Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.