kirill007

PIctures? Subs are probably out of phase.

What SQ? It doesn't produce sound, or atleast it shouldnt if it works well.

Im sorry but i had to laugh at this. Go to a shop and let them tune your gain, because you aren't qualified to do it at the moment. (that's really the best advice i have, because i don't think you want to buy a DD1 or a Oscope) You are clipping, im 100% sure.

What? Why would he have to do that? He should set his gains properly, with a DD-1, Oscope or atleast with a DMM. Don't trust your ears, you can't hear clipping properly at all.

you dont hear any difference between 600w and 750w. The difference is barely 1.5db and that isnt audible at all. A 3db difference is slightly audible. Just keep it on the safe side and do the 600w and set the gain correctly.

I think Fi has these tests, but only made for themselves. Damn, it took quite a beating.

Kind of lazy don't you think? Why would we do the effort to type something if you haven't done a effort to search? (seems quite harsh but it seems logical to me) The power handling depends on the person using it , but since you have already overpowerd a few subs, you shouldn't worry going 20% over RMS rating.(i can't tell you to run 2kw to it because i don't want to be respobsible for a broken sub.) It doesn't matter how loud someone got a sub, the difference between a few people with the same sub and power could be 10db.

Very easy to push? So they aren't new i suppose? They are probably pushed to the max by the previous owner and the coil is probably f**ked up and the spiders aren't as effective as new because they are worn out.

The JL's should smell like perfume when they get burned up, if not please go back to the dealer. (it's probably because the subs are still brand new and the glue still has to cure fully )

Yes, i'm sorry forgot to mention it. you first have to like the page and then reclick the link Would you guys want on video how to do it?

Nevermind people, thanks for voting for the one who did.

4 g's in subs, 4 g's in amps, 4g's in electrical, and so on... That's already 12g is you want to get the best out of your system.

Just ignore it, he won't buy any of it. Jumping from pyramid to SMD's overnight... sur :peepwall:e..

Just read the forums a bit you'll see what brands there are and which are good. Look at the SMD partners.

That 1 stands for infinite, which means there is no closed circuit. maybe its set in the ohm area and you cant see it..... if it was in the AC voltage it probly would read 0 No it wouldn't, have you used a DMM before? It reads that way when the value is infinite. It won't read more accurate if it's a infinite value , only if the value is below 2ohm. No it's not it's rading infinite, have you used a DMM before? Thats what I was thinking.... Thinking wrong..(read above ) again,have you even used a DMM before? It doesn't round up to 1 IF that was the value it was showing. It's showing a infinite value.

If you want a quiet ride, using deadener is not going to give the best or even a good result. Use a MLV noise barrier all over the vehicle to get rid of noise and make your ride more quiet.

A amp will produce a almost even wattage across 20-20,000hz. (although there are some amps that don't...) The reason why a amp will make X wattage when connected to a speaker is because of the impedance curve.

Why would you want to have the same power going to your tweeter and mid? :s Seems wrong to me.

Read THIS please, it's very informative.

i agree to the above terms and i agree to follow through within a timely manner. Alfa romeo 147 Good choice of color on the truck. Great looking SUV .

Mayhem=/= SA 12 The SA 12 will be good with 1 6 inch port, or 2 4's. Maybe even 3 4's if you can but since you want to go the cheaper route, 2 4's will be enough. 1 single 6 inch is more efficient then 2 4's, but it's only in tenths of dB.

Stinger is a good brand if you can't get XS.

Why should he tune at resonant frequency? I don't think that his goal is SPL,going to competitions. or somtimes a little below. I usually peak 10 or so hertz above what my box is tuned at How do you know where he has to tune if you don't even know what sub he gets? If you would tune to resonant frequency it would sound crappy in 99% of the installs. He didn't ask how to be the loudest and even then, tuning to the RF of your car would not be the loudest tuning. Hatley_1, which subs are you using ? What kind of music are you listening to? What are your goals? I never said i did know?... My point was not to tune at resonant frequency. Read again woops, youi shouldn't even be in that post. Hatley_1, which subs are you using ? What kind of music are you listening to? What are your goals?

offcourse not.. But you are loosing your freedom america. And that law violates the human rights, which seeems totally wrong to me. First they wanted guantano bay gone and now they make up something worse then that. A lot of non terrorist, aka innocents were ther

Why should he tune at resonant frequency? I don't think that his goal is SPL,going to competitions. or somtimes a little below. I usually peak 10 or so hertz above what my box is tuned at How do you know where he has to tune if you don't even know what sub he gets? If you would tune to resonant frequency it would sound crappy in 99% of the installs. He didn't ask how to be the loudest and even then, tuning to the RF of your car would not be the loudest tuning. Hatley_1, which subs are you using ? What kind of music are you listening to? What are your goals?