Nathan @ XSpower

6 amps will be fine

Thanks! Visit and post up to get in on the give away. Not sure why the link isn't working. Just visit the XS Power Facebook page for the details. facebook.com/xspower

SBN is only 37 days away!!!!

if you are installing it into a battery hold down that was made for a group 34 battery, then it should work fine. The 3400 has the feet on the battery to work with those types of trays. http://www.summitracing.com/parts/xsp-500

You should have a strong electrical set up for sure!

http://www.sonicelectronix.com/item_66602_XS-Power-D7500.html

If you are limited on space, then look at the D7500s. Same foot print as the D3100 just a little taller.

If you have some gap the washers would be fine. Most cases after you stack your ring terminals everything should tighten up though.

These things are freaking heavy!! Shipping Today! But they have handles on the box!

Yes

Depending on what amp you are using and how you use your system. Do the Big3 first before you do anything and see what it does for you.

Ok try now. Not sure what happened on that.

Just got them in stock. Here is where you can order. http://4xspower.com/shop/merchandise/black-flexfit-hat/

You may still have a little dimming of your lights just depending on what your system is actually doing and how it is wired up. Def do the Big 3 with some 0 guage.

Hook it up and leave it on the charger for at least 24 hours and see what it is reading. Then let it set for another 24 hours off the charger and see what it is reading. Then you can take ti to an auto zone, advance, or anywhere like that and they can test it for you.

If you are only seeing 12.7V with the truck running then there is a problem with the alt. When the vehicle is running you should be seeing the charge voltage at the battery from the alt.

Good advice guys! Check out www.4xspower.com and look on the right side of the site for the application guide. That will tell you the battery that will fit in the stock location if we offer one. Another option is to measure the available room you have to work with and then see what the biggest battery you can fit under the hood is. Or you could forget about putting a battery under the hood and run everything from the battery in the back.

If you work with them they will come back and do more than you ever imagined. They will not be 100%, but they can still get the job done if you have reasonable expectations.

Jeff will take care of you I am sure.

That should be a Group 34 spot. The only other one would be the D6500 but it is longer and wider.

If it is a 4 pin oval alt plug then it will work. They also act as a volt meter after being programmed.

Got the sample and they look good. Going to keep the logo in the back. Will take them 2-3 weeks to get the order completed and then they will be ready and in the store. We will have them and the other merchandise at SBN this year.

No the closest to that would be the 1200. What vehicle is it for?

I can get it to you when I get back in the office. Yes the fan should be running.