OrionStang Posted June 17, 2011 Report Posted June 17, 2011 Simple question for you guys. Just a matter of opinion to see what my next box design will be. First box is standard ported 1.65 with 31.6 port area. Second is aero ported 1.75 cubes with 28.2 port area. Both are tuned at 34.5ish. Shitty sketch Quote SMD Super Seller My Feedback Thread
hdorre Posted June 17, 2011 Report Posted June 17, 2011 Is this for the lvl 5 12 on the DC 3.5k? Quote On 5/8/2011 at 7:38 PM, Kranny said: On 5/8/2011 at 7:35 PM, 'Maxim' said: It hurts me inside when I read stuff like this and remember you're 15 LMFAO so true Mitsubishi 3000GT (Old Build) Headunit: Pioneer 80PRS Frontstage: (2) McLaren Audio MLT-2 Tweeters & (4) PRV Audio MR Series Neo 6.5" Mids Substage: 4 15" Hybrid Subs - Tantric Motors & Sundown Softies Amps: Banda 2.4D Amp (Tweets), American Bass VFL 350.4 (Mids), and (2) Ampere 3800s Electrical :Singer 260A Alt & JY Power Lithium 2005 Chevy Colorado Ext Cab Headunit: Pioneer 80PRS Frontstage: 4 PRV 700Ti Tweets & 6 10" Delta Mids on 3000wrms Substage: 6 Fi BTL 18s in a 4th Order Walkthrough on 3 Wolfram 4500s Electrical: Singer "390" and JY Power My Official Feedback Thread
THEKINGsBACK Posted June 17, 2011 Report Posted June 17, 2011 I vote slot..... Personally only had better air movement with aero ports not much number wise Quote he wouldnt be the first to say they did a 167 with a system like that (one that clearly DOESNT), but i have to say, he didnt beat me anywhere, ive never competed against the guy. If he thinks his does a 167, mine would probably put him in a coma. :hairtrick:
tonedeaf Posted June 17, 2011 Report Posted June 17, 2011 I like slot ports alot more than aeros IMO. Also slot would save you some space it looks like, but sealing off from the gunk would be more of a pain...hrmmm I'd still say slot. Quote
tonedeaf Posted June 17, 2011 Report Posted June 17, 2011 *trunk...you still planning to seal off firing forward, right? If so, why not port on driver side? Quote
OrionStang Posted June 17, 2011 Author Report Posted June 17, 2011 This is the Lvl 5 12 on a 5k. Port/sub back until I get my 10's. The forward firing box for the 12 doesn't fit right. I'm leaving this poll open for a week. Quote SMD Super Seller My Feedback Thread
IH8PunkRok Posted June 17, 2011 Report Posted June 17, 2011 if you have to bend use a slot. that is what ive been told or i read somewhere... cant remember Quote -Matt2005 Dodge Magnum RTJVC KD-AVX1 2 PPI S580.2 Obsidian Audio ST1 Horn Tweeters PRV 8MB450s Audio Legion 3500.1D 2 RE MT 18s 360 ah LiFePO4 BatterySHCA 2/0 155.2 @ 29 hzKicker CVR 15's buildDD 3512e buildMini T-Line Build(6) 8s BuildNightshade 15s Wall BuildMagnum AB XFL 12s BuildNewest Magnum Build
deathcards Posted June 18, 2011 Report Posted June 18, 2011 i say slot Quote skar sk2500.1 0 gauge power and ground kunukonceptz alpine HUvxi65 components on BA gt-275new build log -> http://www.stevemeadedesigns.com/board/topic/150642-project-d-kon-deathcards-build-log/#entry2148821 2 x-15 sundowns singer alt, odyssey bat, and maxwell ultra caps
SpartanSound Posted June 18, 2011 Report Posted June 18, 2011 Can't go wrong with a well built slot AND less space! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.