P4killer_ Posted August 6, 2011 Report Posted August 6, 2011 Stick a screwdriver through the cone. Fuck it. lol but what if he did... Setup: 2010 Hyundai Elantra Factory Unit via 4 chan NVX LOC Excessive Amperage "H/O" Alt Xs D3400/ Xs XP3000 Big 3. 2 Runs of +, 2 Runs of - DD M3b and 2 12" AQ HDC4s
mwjustic Posted August 6, 2011 Report Posted August 6, 2011 Did you beat it in with a hammer?? 2 people can both lift the surround gasket. Should pop up no haha... it just fits perfect with like no room to spare well thats what you get for being a perfectionist lol. good luck tho. and yeah i too have always wondered what you do to get those out. 2005 ford explorer xlt limited 4x4 2 xs power d3400s 2 runs of shca mid/ highs- infinity 6x8 3 ways 2 18 ssa icons 2 aq 1200.1 @ 2 ohms 10 cubes tuned to 36 hrz
Bakerman Posted August 6, 2011 Report Posted August 6, 2011 Stick a screwdriver through the cone and then Fuck it. ^^^Fixed it for ya!
rysc86 Posted August 6, 2011 Report Posted August 6, 2011 that hellaflush. you could get someone to hold/catch the sub while u dump it out. 1997 crown vic police interceptor headunit: avic x710bt sub amp: powerbass xta 1500d sub: fi 15" bl fully loaded enclosure: 3.5 cubes @ 33hz firing through rear deck mids/highs: crappy pioneer paper cone 6x9's and stock rears for now mid/high amp:h/u power FTL wiring: knuconceptz 1/0 memphis interterconnects
BassMunky Posted August 6, 2011 Report Posted August 6, 2011 dammmmmmm Shakin not Stirred....my buildhttp://www.stevemead...ngle-cab-build/412 CVX And put a sealed enclosure in your trunk cut a hole in your deck and call it ported
kirill007 Posted August 7, 2011 Report Posted August 7, 2011 Turn box upside down. And have someone holding the sub in position. Thinking is the root of all problems... You ALWAYS get what you pay for.
lowpt Posted August 7, 2011 Report Posted August 7, 2011 Spray some hairspray or starting fluid in the port, strike a match, and catch the sub before it hits the floor. Be sure to video the procedure. I figured you had enough good advice. So I figured I would give you some that would be fun to watch.
JJ. Posted August 7, 2011 Report Posted August 7, 2011 Been there and done that!, unscrew sub put some 2"x2" on the floor turn box upside down and start tapping the back of the box sub wont fall far/get damaged if it is on carpet. Or as someone else suggested those pick tools work well into a screw hole one each side and just prise it out. JJ Alpine 9855r 2 x DC AUDIO LVL 4 18" 2 x Hybrid Audio Technologies L8 2 X Hybrid Audio Technologies L3 2 X Hybrid Audio Technologies L1 PRO 1 x SAZ 4500D 2 X SAX 50.4 AudioControl Matrix + AudioControl Epicentre 160 8 X hawker genesis deep cycle batteries
stipek Posted August 7, 2011 Report Posted August 7, 2011 Next time don't flush mount. Headunit - Sony DSX-200X Subs - (2) Modified American Bass 18's Monoamp - DD M4 Front Stage - CDT HD62-AS components with 4 Crescendo PWX 6.5 4 Channel Amp - Hifonics ZRX1000.4 Cadence 0 gauge Singer 275 amp Alt D7500 XS Power battery Quad 1/0 input Toolmaker terminals SMD OM-1 RGB LEDs BUILD LOG CURRENT ABOVE SETUP http://www.stevemeadedesigns.com/board/topic/191602-2003-bravada-2-18s-ab-dd-xs-singer/ BUILD LOG (2 MTX 7512's)http://www.stevemead...__fromsearch__1[/size]
jshark5 Posted August 8, 2011 Report Posted August 8, 2011 How big is your port? Maybe send in a small child? 04' Chevy Blazer -Kenwood KIV-BT900, Infinity Kappa 462.9cfp's, Rockford P1653's, Subs... Ridin Stock-
Recommended Posts
Archived
This topic is now archived and is closed to further replies.