Jump to content

SKY HIGH DC MONSTER GMC SHORT VID LINKED TO FLEXING SHOP WALL


Recommended Posts

Posted

Understand the thinking man, just going to be funny seeing people try to get in and out of your rigs for demos/hair tricks. Judges are going to have to bring a step stool to be able to get the mic on the glass. lol

formerly known as Blue86f150

its a 4th order just because its tuned in the 40z doesnt mean it wont reach down and jiggle your balls at sub 30 hz frequencies.

Regardless if they were dipped platinum and were stuffed in Beyonce's twat.....way too fucking exspensive

this sux camel dicks
Posted

Lol, step stool, more like a 6' ladder to put the mic on. Buddy of mine in high school had a late 80's/ early 90's Tacoma with a small block 350 with a 12" lift and 39's. Miss that truck, damn cab mounts rotted out and was gonna be a bitch to repair so he sold it for parts. Good luck on the lift and finding your front axle.

Posted

ive loved big trucks, dad used to have a 78 ford bronco, fully restored, with built 400 big block, and 40in irocks, gears and lockers.

Jeep Cherokee 4dr -4.75 in front, new rusty's 4.5 in rear leafs -micky thompson 35x14.50x15 -locker rear -Rusty's offroad Engine/transmission/transfer case/crossmember/gas tank skid plates -Warn front bumper with 8000lb winch -Custom rear bumper -Warrior product tube doors (summertime) -Optima redtop (starter) -26XK miles and still runs like a bat out of hell

Kenwood H/U

1/0 wire,

136 amp alt 200 ah batteries 12.7 daily

2 Apsm 1500 @ 2 ohm strapped on zv3 d1 with ns softparts

Mb quart 125.4 wired to 4 aura 6's

3.6 cube box tuned to 36 plays down to 23hz

Posted

Understand the thinking man, just going to be funny seeing people try to get in and out of your rigs for demos/hair tricks. Judges are going to have to bring a step stool to be able to get the mic on the glass. lol

hahah they can climb up the tire to get it up there lol it should be funny just to hear the commentary lol

Lol, step stool, more like a 6' ladder to put the mic on. Buddy of mine in high school had a late 80's/ early 90's Tacoma with a small block 350 with a 12" lift and 39's. Miss that truck, damn cab mounts rotted out and was gonna be a bitch to repair so he sold it for parts. Good luck on the lift and finding your front axle.

shoulda just switched the bodies out and kept the truck!

im thinking about building a small podium like 5-6 steps for people to walk up to get in lol

ive loved big trucks, dad used to have a 78 ford bronco, fully restored, with built 400 big block, and 40in irocks, gears and lockers.

nice man ive always liked those old broncos

JonSig1_zpsaea3e8d2.gif

 

Contact us for the best quality cables and accessories with the fastest shipping in the industry

EMAIL: [email protected]<script data-cfhash='f9e31' type="text/javascript"> /* */</script>

LIKE US ON FB: https://www.facebook.com/SkyHighCarAudio

ADD ME ON FB: https://www.facebook.com/jon.rabe.1

MONSTER SKY HIGH/DC GMC: http://www.stevemeadedesigns.com/board/topic/127057-sky-high-monster-gmc-walk-through-12-lvl-5-15s-6-9ks-trim-panels-and-wiring-p-90/

 

Posted

Im curious how park and pound will work with you up that high, it will push u farther away from the mic wont it, both up and horizontally?

Either way I like the 20" lift! Gonna be badass

Nice meeting u guys at the show saterday

SCSB

Santa Cruz Speaker Box

Build logs:

Daily Driver Lemon Marquis

2 american bass 750.1s

350.4 on 14 focal 6.5s

sq 945 on 4 hertz tweeters

Mystery subs peepwall.gif

http://www.stevemead...__fromsearch__1

The Mustang 'dubbed' Shirley the project from bullet holes to badass

http://www.stevemead...cond-skin-time/

Posted

MAN!! You could alter a fiberglass ladder, 4', 6' whatever works, and it could swing down from under the truck on actuators. Then when you don't need it, swing up and be out of the way under the truck!

Either way, I wanna see this thing when it's done! I wish I had the money to do this to my F350, but alas....................I'm married, thus married money, thus no fun for me! I'll have to stick to my audio and 4 12's 4th order blow through. I wanna lift my 350 though for sure! Something about being higher than everyone else.

Posted

Rig up a rope ladder to fall out the passenger door when it opens.

THERE IS NO BUILD LOG!

1998 Chevy Silverado ext cab

Alpine CDA-9887

4 Team Fi 15s

2 Ampere Audio TFE 8.0

2 Ampere Audio 150.4

3 Digital Designs CS6.5 component sets

Dual Mechman 370XP Elite alternators inbound!

8 XS Power d3400

6 XS power d680

Second Skin

Stinger

Tsunami Wiring

Sky High

A Real Voltmeter not a piece of shit stinger.

Posted

Rig up a rope ladder to fall out the passenger door when it opens.

I love this idea lol that would be awesome lol

YEEEEEEEEEEEEE

ROCKFORDlogo.jpg

Posted

what kit are you using for your brackets?offroad direct, offroad unlimited,offroad design, should give you 3-4" of lift, sky manufacturing will

give you 6" just from the brackets.

so far thursday looks like i should be home by 3, i'm also down to do a little wrenching.

heres the kit:

http://www.offroaddi...-kit-_p_10.html

shit shoot me a text i will more than likely be at dc

ill be doing it out in silver springs at a buddies shop where they have all the tools lol i could more than likely use some help though and ill pay your gas and shit to come out and over see haha

i have the same kit, it gave mine 3",and i have 8" skyjacker softrides leafs up front and a 10" spring pack out back with a 1" block.

the only thing i dont like about the ord kit is the shock hoops.i dont like the the way they mount. i ended up using the hoops off my 10" whiplash kit.they actually mount to the frame instead of the upper control arm mounts.

shit! silver springs, i can always have my wife drive my truck to work and take her 04 sierra out there. i'll hit you up thursday when i'm on my way home.

center console: lvl 4 12 1.75 cu ft tuned 37htz

alpine cda-9886

dc audio 120.4

infinity kappa 6.5" components

Archived

This topic is now archived and is closed to further replies.

  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Who's Online   0 Members, 0 Anonymous, 1422 Guests (See full list)

    • There are no registered users currently online
×
×
  • Create New...