CJ18 Posted December 11, 2012 Author Report Posted December 11, 2012 The numbers I will get would be fresh out of the box. You want fully broken in numbers. Quote
JamieHoward Posted March 29, 2013 Report Posted March 29, 2013 Just wondering if level 4 specs are available yet? Quote
As-21 Posted May 30, 2013 Report Posted May 30, 2013 so when is the level 5 Ts parameters will be released ? Quote Hertz HSK 165XL Celestra FA475xDC Audio 3.5KDC Audio level 5 12 inchXS Power 6500 on the front.XS Power 3100 on the back.Knukonceptz 0 gauge an 10 gauge OFC wire.
Skater229 Posted September 5, 2013 Report Posted September 5, 2013 Just wondering if level 4 specs are available yet? http://www.dcaudio.us/level4.html Quote 2010 Chevy HHR Panel (Work in progress) Pioneer AVHX-5800BHS McLaren MLM880's and MLT2's 2ea per door on a DC 175.4 Two DC Audio M4 Level 5 15's On A DC5K Alt CES 200/270+ 4ea Banks of Maxwell 2.7v 3000f caps for a total of 2000f 1ea XS 3100 and 2ea NSB FT170 Batts for 450+ah Not a HUGE build but here it is... DC Audio HHR Build
celticwind Posted January 12, 2020 Report Posted January 12, 2020 I realize this is a dead thread however, I am trying to find t/s parameters for a dc audio level 6 18 and the link in this thread is broken. Does anyone have or know where to find good specs? Quote
will77530 Posted January 12, 2020 Report Posted January 12, 2020 2 hours ago, celticwind said: I realize this is a dead thread however, I am trying to find t/s parameters for a dc audio level 6 18 and the link in this thread is broken. Does anyone have or know where to find good specs? Did ya check the website or call them Quote
CrackFactory Posted January 13, 2020 Report Posted January 13, 2020 Website doesn't show. I have saved the old specs for a m3? I believe. Hopefully it helps. Here are the specs I have: 18" Mounting Depth11.5" Mounting Hole Diameter16.75" Outside Driver Diameter18.5" Motor Width9.84" Weight85lbs VC Diameter4" Displacement.26³ ft Magnet Weight80lbs Power Handling RMS/Peak4500/9000 Impedance (Ohm)D.7/D1/D1.4/D2 Sd1217cm² Vas67.02 liters Cms0.0325mm/n Mms588.52g Fs36.4 BL36.25 Re4.02 Ohm Le7.5mH Qms22.43 Qes0.416 Qts0.409 Xmax31.25 mm Ref SPL @ 1 watt90.7dB Suggested SealedN/A Suggested Ported 6³ ft Quote
celticwind Posted January 14, 2020 Report Posted January 14, 2020 On 1/13/2020 at 12:48 AM, CrackFactory said: Website doesn't show. I have saved the old specs for a m3? I believe. Hopefully it helps. Here are the specs I have: 18" Mounting Depth11.5" Mounting Hole Diameter16.75" Outside Driver Diameter18.5" Motor Width9.84" Weight85lbs VC Diameter4" Displacement.26³ ft Magnet Weight80lbs Power Handling RMS/Peak4500/9000 Impedance (Ohm)D.7/D1/D1.4/D2 Sd1217cm² Vas67.02 liters Cms0.0325mm/n Mms588.52g Fs36.4 BL36.25 Re4.02 Ohm Le7.5mH Qms22.43 Qes0.416 Qts0.409 Xmax31.25 mm Ref SPL @ 1 watt90.7dB Suggested SealedN/A Suggested Ported 6³ ft Its a start and will get me in the ballpark for now... thank you very much Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.