DubNDodge Posted October 29, 2012 Report Share Posted October 29, 2012 I was just curious to see what other people have used to cut 1/0 AWG. I have a cutter/crimper that goes up to 10 AWG at the most. I was wondering what else is out there besides spending $20 on 1/0 cutters that I would use once. I've looked around on the forum but I haven't found anything really, nor is it in any build logs that I've looked in. '01 Dodge Stratass Sealed Trunk Build Log 2008 Honda Fit Sport Build Log On 10/3/2013 at 10:00 AM, ROLEXrifleman said: Anyone who says they knew everything they wanted out of life at 19 can go suck a bag of dicks cause they are lying to themselves or brought up in a cult. Link to comment Share on other sites More sharing options...
Ryan929 Posted October 29, 2012 Report Share Posted October 29, 2012 Bolt cutters would work. lol Link to comment Share on other sites More sharing options...
kl0wn Posted October 29, 2012 Report Share Posted October 29, 2012 Bolt cutters 06 Mini Cooper S Sundown, SoundQubed Cadence, XS Power 151s Sealed 155s Outlaw Windshield @ 37hz Link to comment Share on other sites More sharing options...
pa-pa-platypus Posted October 29, 2012 Report Share Posted October 29, 2012 butter knife and my teeth This isn't teeball. YOU DO NOT GET A TROPHY JUST BECAUSE YOU SHOW UP. Put the work in and then maybe get the respect when it has been earned 151.6 with single 12 at 41 hz 153.2 with 2 12's at 43 hz power: dd m4 Link to comment Share on other sites More sharing options...
kickass audio Posted October 29, 2012 Report Share Posted October 29, 2012 I used to use bolt cutters for my wires that were over 8ga but my dad got me a cable cutter from harbor freight that works better than the bolt cutters since its sharper and it is easier to use with it being smaller in size. This is what i use now: http://www.harborfreight.com/10-inch-cable-cutter-40507.html 2004 GMC Envoy1 XS power S3400 batt under the hood and 4 XS Power D3100's battery installed in the rear by the amps0 gauge power wire from front to backAlpine iva-w205 touchscreen dvd/cd/mp3/ipod/am/fm/gps headunitSundown Audio SAX-200.4 amp for my mids and highs8 gauge speaker wire from amp to woofer270 amp Mechman AltRockford Fosgate T1652-s component speakersRockford Fosgate 3Sixty.2 sound processorRca's from Rockford Fosgate and Monster Cable14 gauge speaker wire for the mids and highs1 18" Ascendant Audio SMD Dual 1 ohm with custom Black & Blue carbon fiber and hand signed dustcapBox: 5.66 cubic feet net volume box tuned to 30.13Hz with 1.5" wide wooden dowels and 1.5" thick baffle1 DC Audio 5.0k amp wired to .5 ohms nominal with an imp rise of 1.35 ohms for the single AA SMD 18"Future Vision 8000k 50w bi-xenon projector HID's with 4300k 35w fog lightsLink to my build: Buildupdates/progress Link to comment Share on other sites More sharing options...
Raptorman Posted October 29, 2012 Report Share Posted October 29, 2012 I use like, hedge clippers. Hahahah. And a hammer. I hammer on the handle, put it against the ground and wham on the top handle. I'm weighin in at a hefty 120lbs, I ain't go no strength fo dat! 1996 GMC Sonoma Four Fi BTL Neo 18's In 2:1 6th Order Bandpass 2 Ampere 5k's @ .5 TEAM FI TEAM #LITHIUMCANTDEMO On 10/20/2013 at 0:37 AM, KillaCam said: Fucking with a Prius driver is like making fun of a disabled kid. Pussies. Link to comment Share on other sites More sharing options...
bighossf150 Posted October 29, 2012 Report Share Posted October 29, 2012 http://weldingsupply.securesites.net/cgi-bin/spider.pl?B-52||1|505|| cheap and works great Used to have a loud truck 2009 Corvette Z06, H/C/I, 150 shot, g force tune, 730rwhp/690rwtq 2013 F-150 limited, MPT Tune, leveled on 35"s Link to comment Share on other sites More sharing options...
draper Posted October 29, 2012 Report Share Posted October 29, 2012 make sure you make a level cut so you can get equivalent wire coverage for your terminal. 97 crown vic kenwood hu big 3 mechman 270 amp alt 1 d3400 2 d3100 hiffonics collosus (bass) Hifonics Zues (mids and highs) 2 15in kicker l7s dynamat extreme sound deadner viper secured Link to comment Share on other sites More sharing options...
killallblue Posted October 29, 2012 Report Share Posted October 29, 2012 Linemen wire cutters is the only way to cut wire right Link to comment Share on other sites More sharing options...
KillaCam Posted October 29, 2012 Report Share Posted October 29, 2012 I use like, hedge clippers. Hahahah. And a hammer. I hammer on the handle, put it against the ground and wham on the top handle. I'm weighin in at a hefty 120lbs, I ain't go no strength fo dat! I was going to say hedge clippers lol. I don't have to use a hammer though. Makes a clean cut with minimal force. And the fact more than one person agrees does not make it a circle jerk, it makes it a bukkake scene and you're in the middle Chick took 3 shots of Jager, and then, pissed in my mouth.. B5 Passat Build Log Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.