Jump to content

Smoove's 1996 Chevy Ext cab C1500 Blowthrough RF, Fi, DD, SMD Meters 6th. updated pics start page 89


Recommended Posts

Posted

Just read the whole thing. Got a few ideas (thanks!). I've always tinkered with the idea of taking out my bench and replacing it with some cheap race seats to give me a bit more room for the box. How much were the ones you got, those look good to me.

Also, my steering column is very loose, like there's no screws in it, and it's not the tilt, it's loose further back somehow, do I have to take the whole thing apart to fix it?

I could probably fashion a puller to pop the wheel loose. Is this a common problem with these columns? It'd be nice to replace the whole thing altogether, because the high beam/ turn signal lever is terribly worn as well, and the ignition has it's own issues. Any advice?

Went nuts with the pics in my build log, just keep a little camera in your pocket and snap when you think of it.

BTW, Nice box! I've thought of a blow through before, but for now, I'm going to see what all I can squeeze out of the current setup before building a new one.

That's the first box I've ever made, and it's in need of some bracing and paint, but it's crazy on the lows.

Blew out the weather stripping in seconds, but I had the front bumper wobbling a bit on the lows. Can't wait to see yours finished, tuned in for sure.

Knowledge is the greatest tool in any garage. It's also the most priceless, and most easily shared. icon_nuts.gif

Here's my latest build.

http://www.stevemeadedesigns.com/board/topic/181273-89-c1500-build-log/

Posted

Just read the whole thing. Got a few ideas (thanks!). I've always tinkered with the idea of taking out my bench and replacing it with some cheap race seats to give me a bit more room for the box. How much were the ones you got, those look good to me.

Also, my steering column is very loose, like there's no screws in it, and it's not the tilt, it's loose further back somehow, do I have to take the whole thing apart to fix it?

I could probably fashion a puller to pop the wheel loose. Is this a common problem with these columns? It'd be nice to replace the whole thing altogether, because the high beam/ turn signal lever is terribly worn as well, and the ignition has it's own issues. Any advice?

Went nuts with the pics in my build log, just keep a little camera in your pocket and snap when you think of it.

BTW, Nice box! I've thought of a blow through before, but for now, I'm going to see what all I can squeeze out of the current setup before building a new one.

That's the first box I've ever made, and it's in need of some bracing and paint, but it's crazy on the lows.

Blew out the weather stripping in seconds, but I had the front bumper wobbling a bit on the lows. Can't wait to see yours finished, tuned in for sure.

The jump seats cost me like $60 for both at a junk yard. Paid like $200 to have the custom brackets made. I hate the bench, but didn't want to lose the seating which made the wife happy.

I try to take lots of pics these days, I have always been horrible about documenting stuff.

What year is your truck that your have that nuch steering column problems? Being that I will only be running about 5k on a pair of SP4's wobbling the front bumper would be sweet. I wanna be in a hurry to get the bass playing, but I will only have weekends now. gonna try and be playing asap. Might need CleanSieera to come by and help wit the doors at some point.

Posted

1989 Chevy C1500 single cab long bed. I'm determined to do a hair trick WITHOUT a blow through, I'm close, but not there just yet. Check out my build, I've posted a lot lately.

Today I'm bracing the box and looking to paint it as well. I'll post pics later when it's dark, daylight is burning. BTW, using a Power Acoustiks Demon 6000.1BD, have it a one ohm, it claims 3.5k rms, but I doubt it does that. Still does much better that my old one, I'm dying to get it all back in and get a video of the door flex!

Lets us both work on boxes today! (unless you have to work, the money really helps) :detail:

Knowledge is the greatest tool in any garage. It's also the most priceless, and most easily shared. icon_nuts.gif

Here's my latest build.

http://www.stevemeadedesigns.com/board/topic/181273-89-c1500-build-log/

Posted

1989 Chevy C1500 single cab long bed. I'm determined to do a hair trick WITHOUT a blow through, I'm close, but not there just yet. Check out my build, I've posted a lot lately.

Today I'm bracing the box and looking to paint it as well. I'll post pics later when it's dark, daylight is burning. BTW, using a Power Acoustiks Demon 6000.1BD, have it a one ohm, it claims 3.5k rms, but I doubt it does that. Still does much better that my old one, I'm dying to get it all back in and get a video of the door flex!

Lets us both work on boxes today! (unless you have to work, the money really helps) :detail:

I so wish I was working on my box. Im in traing this week. so I can't get to my box until this weekend. I am looking forward to seeing a vid of how your box gets down.

Posted

Thats the plan. I am ready to be done with the box so the console can be worked on.

Posted

yea i hear that fella, will be nice to see box all finished and get to check out the final product, yours is looking really nice also that u are taking your time with it and doing it up really good

shrunk AB pic.jpg

  • 2 weeks later...
Posted

looking good man. cant wait to see some more updates

Blowthrough

Subs
rebuild
Amps
1-SAZ3500
1-T4004

Coaxial

1Set Alpine Type-R Components

1 Set- kicker ks 5.2
1 Set- Kicker ks 6x8

Reciever
Pioneer DEH-P7400HD

2000 Ford F-150 EXT Cab

Clarion EQ

ra56jo.jpg

Archived

This topic is now archived and is closed to further replies.

  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Who's Online   0 Members (See full list)

    • There are no registered users currently online
×
×
  • Create New...