..

[goodvibez]

Yeah man, no prob there are a few things that i know that would have helped the first go around spraying it, feel fee to hit me up any time!

[DylanBunch]

My friend has a c pillar wall that we sealed off a week ago... it was such a big difference. He almost rebuilt it cause he wasnt getting the output he wanted but I convinced him to seal it off first and its so much louder and windier that before. I think you'll be surprised and I think it'll be a little bit more than a .5db gain. Yours is looking great! Haven't been on here as much lately but this is coming along great, cant wait to see the results!

[MarioB]

GFY!!!!!!!!!!! Thats all

[Kyblack76]

To answer your question about cleaning the gun, it's just lacquer thinner. I spray it through before and after painting. Good work man!

Thanks kid..... Ill probably need more info when we get rolling.

That thing should be crazy now that it's sealed. Can't wait to see when you get it playing again.

I dunno. Well see. I think the ear o meter, it may take off. And, help on float/hair tricks. ....Noise reduction in the rear. But meter..... i cant see how my system can be close to a sealed 57-58.

Thats where id be with a 2db gain. Im not buying it. Ill take a .5 gain, with a lower end, and broader band, YOU BET. Thats my hope more than just a gain.

Jealous man, you don't give yourself enough credit.

If I get this job......

I hope you do. And thanks. Im my worst enemy. Trust me, no one beats me up,... like me.

I hope it gains a shit ton so we can all say see what did we tell you

Oh you.......

Yea I agree with Orion. You sell yourself short bro. This is turning out really nice big bro. I bet it will look good as that sub wall pic you posted.

Dude, if i could do that...... id quite my job.

Good to see your still putting in work bro. Seal job is looking great! You did it the same way I want to when ever I build a wall.

Not sure if I missed it but are you planning to bed line the whole face or just the sides?

Man, where you been? Bed line the entire wall face, sides including the pillars, roof and floor same width.

Be a boss make that shit smooth

I be watching

... u r louder than me!!

for now

Bro..... im not good at the finish shit. Ill spend more time and money just getting it OK. Id rather just get it ok, and shoot it with something that hides it.

Sorry, id love AMI's glass wall, but, fact is, i dont have the time, or knowledge.

Yeah man, no prob there are a few things that i know that would have helped the first go around spraying it, feel fee to hit me up any time!

IM GOING TO.. thanks

My friend has a c pillar wall that we sealed off a week ago... it was such a big difference. He almost rebuilt it cause he wasnt getting the output he wanted but I convinced him to seal it off first and its so much louder and windier that before. I think you'll be surprised and I think it'll be a little bit more than a .5db gain. Yours is looking great! Haven't been on here as much lately but this is coming along great, cant wait to see the results!

Yeah? where you been? ... and dude, no one is more stoked than I... ill get results asap.

GFY!!!!!!!!!!! Thats all

And...... why i like you.

Home. I had to do some work to one of our showers. (yeah, that one)

I messed up, and got a low flow head for the top unit. There are 2, top and, "MID" level. .... Ya.

Anyway, got a proper top mount.

It does some rain, for the TIME usage, then a high flow to get it all done up.

Anyway, point is, while nabbing plumbing shit, i nabbed some 60, 120, and 220 grit blocking..... leggo do some more glassing/filling.

[fecupe2001]

impressive build kyle!!!

whats the box and port size? you have a single 10K wired at .7 ohms right? im gay for you right now lol

[Kyblack76]

impressive build kyle!!!

whats the box and port size? you have a single 10K wired at .7 ohms right? im gay for you right now lol

LOL

box size, port size..... hmmm good question

[Kyblack76]

But yes sir.

Im at around .7 ish.

With maybe a average, maybe below average electrical.

Bro..... help a brother out.

I want to increase, but, id rather be able to play music. Fuck that 48hz, im ok loud shit. But, i can stand some one saying they are loud at 19hz.

Ya know?

[Herokight]

impressive build kyle!!!

whats the box and port size? you have a single 10K wired at .7 ohms right? im gay for you right now lol

LOL

box size, port size..... hmmm good question

It's a mystery, ain't it?

[fecupe2001]

i honestly don´t care what other people think, as long as i like my shit then it´s cool, im LOUD on the ear-o-meter from 15 hz but i only meter a 154.4 with a 10K wired at 1 ohm (is a .5 ohms version) and 8 15s, i´ve done that score with 2 12s on a burp box lol, i get your feeling, all those morons thinking that they are as loud as you are just because they burp the same score, yes i´ve built tons of burp boxes, but i would NEVER spend my time , money or effort on a wall just for a score on the meter, don´t change anything on your design because it looks loud as hell, 155 at 38 hz is impressive, if you really want to be way louder on the meter and still be able to play music like you do, you can always upgrade to 16v electrical, play with port area, cabin, etc etc.

I haven´t changed anything on the yaris or explorer, love both cars for sure!!

[Kyblack76]

i honestly don´t care what other people think, as long as i like my shit then it´s cool, im LOUD on the ear-o-meter from 15 hz but i only meter a 154.4 with a 10K wired at 1 ohm (is a .5 ohms version) and 8 15s, i´ve done that score with 2 12s on a burp box lol, i get your feeling, all those morons thinking that they are as loud as you are just because they burp the same score, yes i´ve built tons of burp boxes, but i would NEVER spend my time , money or effort on a wall just for a score on the meter, don´t change anything on your design because it looks loud as hell, 155 at 38 hz is impressive, if you really want to be way louder on the meter and still be able to play music like you do, you can always upgrade to 16v electrical, play with port area, cabin, etc etc.

I haven´t changed anything on the yaris or explorer, love both cars for sure!!

Dude, i thank you.

That, is very very comforting from a audio guy.

I WILL not go over 12v.

REAL MEN DO IT ON 12VOLT.

LOL..

I will add 2 alts. One soon. That will help my timed (30 second) runs.

And, i want to keep it a bit the way it is. Im busting my nuts (fuck as we type) sealing it off. After a 14 hour work day (drive included) im beat, but,... im trying.

I have to admit... its looking bad ass.

Thanks man...

Im gonna load the drivers tomorrow, and meter it. (before finish work goes on the wall)

I have a note pad, with ALL testing ive done prior. What volume, freq, all that shit.

Im going to RE DO that all, at the same shit tomorrow.

I cant wait to see results.

Thank you bro. Really. Thank you.

Ill gonna keep it all legit.