bighossf150 Posted May 11, 2013 Report Posted May 11, 2013 I use a grinder and cut off wheel. Used to have a loud truck 2009 Corvette Z06, H/C/I, 150 shot, g force tune, 730rwhp/690rwtq 2013 F-150 limited, MPT Tune, leveled on 35"s
wizart383 Posted May 11, 2013 Report Posted May 11, 2013 take piece of pipe and make "extenders" for the handles on your cutters.. unless the cutters are dull as fuck it should make it so it'll handle the wire That's what I was going to recommend the op.
kirill007 Posted May 11, 2013 Report Posted May 11, 2013 For for sky high wire i use these cutters, watch out for your fingers though. Maybe even sharpen them before cutting 2/0. (It's important you get the pink ones.) Thinking is the root of all problems... You ALWAYS get what you pay for.
bassfreake Posted May 12, 2013 Report Posted May 12, 2013 I used my serrated knife to cut 1/0... Something like that if you have the patience will cut anything Thanks I was pretty excited about the alt myself. kind of like a school girl, in a dress, on a swing. lol It's warming up enough that the donut-punching cyclist douchenozzles are getting their two wheeled fagmobiles out. My Build Log
bassfreake Posted May 12, 2013 Report Posted May 12, 2013 would these do it? I don't even remember what we've used them for in the past but me and my dad have used them for something on more than one occasion... enough times that I actually remember them lol just don't remember what we used them for Thanks I was pretty excited about the alt myself. kind of like a school girl, in a dress, on a swing. lol It's warming up enough that the donut-punching cyclist douchenozzles are getting their two wheeled fagmobiles out. My Build Log
memphisBred Posted May 12, 2013 Report Posted May 12, 2013 Those are for cutting PVC pipe. SMD Super Seller/Buyer Audison----Hertz----Rainbow
Omega5002 Posted May 12, 2013 Report Posted May 12, 2013 When in doubt 2003 Kia Sorento Team Subsonic LowsTeam Bassin' on a Budget2016 Rebuild Under Construction Best score: 150.2 at 40hz (3k, 2 Custom HDC3 15's) Usaci style(door open, in the kick)
ChevyBoy95 Posted May 12, 2013 Report Posted May 12, 2013 with a set from darvex, i have cut 4/0 welding no sweat. the harbor freight ones are cheap and not sharp. get theses.... Kline lineman cutters there 30 from home depot it cuts my 2/0 and I have cut 3/0 with itThese?http://www.homedepot.com/p/Klein-Tools-Hi-Lev-Cable-Cutter-For-4-0-Alum-2-0-Soft-Copper-and-100-Pair-24-AWG-63050/100492628#.UY3VjYLgL9AI have them here right now and no dice. Shit is fucking thick. They are dull, but they still cut the 1/0 fairly easy. Weird I have cut legit 3/0 all day long with them and 2/0 i cut 4/0 with those just fine as well. Best Score to Date : 160.5 dB Outlaw (47Hz)[4 XM 15's & 2 Taramps Bass 12k's] BL : http://www.stevemeadedesigns.com/board/topic/147800-chevyboy95s-4-15s-7krms-wall-1533-db-on-half-power/YouTube: http://www.youtube.com/hitemwiththeflex/
russtezecustoms Posted May 12, 2013 Report Posted May 12, 2013 This would work too. Ok i know its off topic but wtf were they cutting here Official SHCA 2/0 Wire cutter EDIT: Damnit CJ Ninja'd me haha This I just wish i had a funny sig.
Recommended Posts
Archived
This topic is now archived and is closed to further replies.