TonyD'Amore Posted December 27, 2013 Report Posted December 27, 2013 Check out Video 7 of our series of educational videos. As usual, this one starts off answering the homework problem from Video 6, and then goes into the science behind the gain control knob and properly setting gains. Quote
TaylorFade Posted December 27, 2013 Report Posted December 27, 2013 You, Sir... are a scholar and a gentleman. Quote
ToNasty Posted December 27, 2013 Report Posted December 27, 2013 This answers all the questions I had about setting gains of a processor Quote ***Super Sellers List***http://www.stevemeadedesigns.com/board/topic/25829-super-sellers-buyers
vetkilr01 Posted December 27, 2013 Report Posted December 27, 2013 Seems like a processor is a good idea. Great stuff man. Quote
osiris10012 Posted December 27, 2013 Report Posted December 27, 2013 Very informative. Thank you for sharing. Quote
alaskanzx5 Posted December 27, 2013 Report Posted December 27, 2013 So when setting everything up with a dd1 you can just simply hook it too to the last part in the system Anne set it all up from the front to back, that will make it easier and faster IMO. On question I have is if using say a -5 track is used ti set it up how does that change the process? Quote t1500bdcp 2 t2d4 15" 1 t600.4 1 t400.2 1 set p1 tweets singer alt, tons of wiring, smd vm-1, 80prs, back seat delete, still in the works, aiming for a 145-147 with the ability to play 25hz up to 50hz.
SonicElectronix Posted December 27, 2013 Report Posted December 27, 2013 Very nice vid! Quote www.sonicelectronix.com | Authorized dealer for Rockford Fosgate, JL Audio, Sony, Hifonics, NVX, Wet Sounds, Kicker, JBL, and tons more! Check out the exclusive SMD deals on this thread: Name your Deal & Exclusive SMD Promotions
Kyblack76 Posted December 27, 2013 Report Posted December 27, 2013 Wow. That made a LOT of sense. Thanks TD. Quote SMD SUPER SELLER The Burban Build Blazer Build sold Acura trunk build sold
bcbrassard Posted December 27, 2013 Report Posted December 27, 2013 Crazy Math on lesson 6, i was never really good with math, i understand it but remembering formulas is hard. Good to know to leave the dd-1 at the end run with the gains down to find HU Clipping. Great vid, guys got sick math skills but makes it simple for folk like us. Quote
alaskanzx5 Posted December 28, 2013 Report Posted December 28, 2013 The math part isn't the hard part IMO, it's remembering formulas (my memory sucks). Does make it look easy in the videos though. Quote t1500bdcp 2 t2d4 15" 1 t600.4 1 t400.2 1 set p1 tweets singer alt, tons of wiring, smd vm-1, 80prs, back seat delete, still in the works, aiming for a 145-147 with the ability to play 25hz up to 50hz.
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.