MusicHead804 Posted September 2, 2015 Author Report Posted September 2, 2015 my budget is like 350 max, but what would be 2 really good 1k amps ?
IH8PunkRok Posted September 2, 2015 Report Posted September 2, 2015 Wire to .5 problem solved -Matt2005 Dodge Magnum RTJVC KD-AVX1 2 PPI S580.2 Obsidian Audio ST1 Horn Tweeters PRV 8MB450s Audio Legion 3500.1D 2 RE MT 18s 360 ah LiFePO4 BatterySHCA 2/0 155.2 @ 29 hzKicker CVR 15's buildDD 3512e buildMini T-Line Build(6) 8s BuildNightshade 15s Wall BuildMagnum AB XFL 12s BuildNewest Magnum Build
RooTxBeeR Posted September 2, 2015 Report Posted September 2, 2015 Wire to .5 problem solved Do not do this lol On 11/20/2012 at 8:54 PM, AMI CUSTOMS said: Turned mine up today at a light, guy next to me his steering wheel started moving and he looked over at me like I was a magician lol. On 5/9/2012 at 8:45 PM, skittlesRgood said: fuck the plating. look at what the main metal used is. you could buy unicorn blood plated terminals but if its just covering up dog shit, whats the point On 4/10/2013 at 12:26 PM, mrd6 said: I'll admit, half way through sanding that fiberglass in the rain and cold while I was all itchy I was definitely starting to question why i was doing this haha Soon To Be '04 Ford Escape US Alternator 280A Hairpin D4800 Under the Hood (6) XP3000's in Rear 1/0 SHCA & XS Power 4 runs to back TORK2 kit from Tony @ CE Auto Supply Pioneer DEH-80PRS DD AW6.5 (2) per door *Tweeter Unkown* DD SS4a & C3d (2) SCV4000 @ .5Ohm (2) 15" Sundown Zv5
alex912005 Posted September 2, 2015 Report Posted September 2, 2015 Hifonics BRX3016.1D from sonic electronix is supposedly 2000w rms @ 2 ohms and 3000w at 1 ohm and is only 339.99$. Kind of hard to believe. Found it for 319$ on amazon lol. Your budget is too low, there is no way you can get 2 1k amps for this money. Either use one sub, or recone them to dual 1s. My Build Log
Jhunt94 Posted September 2, 2015 Report Posted September 2, 2015 Hifonics BRX3016.1D from sonic electronix is supposedly 2000w rms @ 2 ohms and 3000w at 1 ohm and is only 339.99$. Kind of hard to believe. Found it for 319$ on amazon lol. Your budget is too low, there is no way you can get 2 1k amps for this money. Either use one sub, or recone them to dual 1s. because obviously if he doesn't have the money for a nice amp, he'll drop a couple hundred bucks on recones and then money on an amp. Think with your head. OP if it were me, I would just wait and save up a little more where you could either buy two 1000-1200 watt amps or until you could get one big amp. 2007 Ford F-150 Reg. Cab. Flareside250 Mechman AlternatorSky High Car Audio Big 3 XS Power D3400Rockford Fosgate 1/0 amp kitRockford Fosgate T1500-1bdcpRockford Fosgate T400-4DC Audio Lvl 4 12"Rockford Fosgate Punch 6.5" componentRockford Fosgate Punch 6x8Pioneer AVH-P2300DVDSMD Volt Meter
RainStryke Posted September 2, 2015 Report Posted September 2, 2015 You can strap two amps together to get the power you need. This is the cheapest route I've been able to find for 2400w @ 2OHM's with two of these strapped: http://www.rockvilleaudio.com/rxd-m4/ One of the guys did a review on that AMP and it did better than expected. http://www.stevemeadedesigns.com/board/topic/199548-rockville-rxd-m4-amp-dyno-test-150030006000w/
alex912005 Posted September 2, 2015 Report Posted September 2, 2015 Hifonics BRX3016.1D from sonic electronix is supposedly 2000w rms @ 2 ohms and 3000w at 1 ohm and is only 339.99$. Kind of hard to believe. Found it for 319$ on amazon lol. Your budget is too low, there is no way you can get 2 1k amps for this money. Either use one sub, or recone them to dual 1s. because obviously if he doesn't have the money for a nice amp, he'll drop a couple hundred bucks on recones and then money on an amp. Think with your head. OP if it were me, I would just wait and save up a little more where you could either buy two 1000-1200 watt amps or until you could get one big amp. Or he can get 2 Kenwood kac-9106d. I found them on amazon for 162$ each, that's well within your budget and they're 1000w each at 1 ohm. My Build Log
Ahmed Johnson Posted September 2, 2015 Report Posted September 2, 2015 You can strap two amps together to get the power you need. This is the cheapest route I've been able to find for 2400w @ 2OHM's with two of these strapped: http://www.rockvilleaudio.com/rxd-m4/ One of the guys did a review on that AMP and it did better than expected. http://www.stevemeadedesigns.com/board/topic/199548-rockville-rxd-m4-amp-dyno-test-150030006000w/ Nice power for cheap but holy shit did they lie all through their spec sheet. 6000/3000 rms and then it rated at 1500 and then they have a special hifonics rating. Wtf, LOL!
Broke_Audio_Addict Posted September 2, 2015 Report Posted September 2, 2015 OK, I did some searching and thinking and thought hey what about a big 2 channel amp. this Is what I came up with in your price range that should get the job done. You would wire each sub to its own channel at 2 ohm. Rated 1050x 2 at 2 ohm. http://www.sonicelectronix.com/item_42914_Lanzar-OPTI700X2.html Normally I wouldn't recommend a lanzar but everyone says the opti series is legit and puts out the power. That being said a lot of people's definition of "music" is a clipped 30 hz sine wave with some 80 IQ knuckle head grunting about committing crimes and his genitals.
MusicHead804 Posted September 2, 2015 Author Report Posted September 2, 2015 Okay what if i kick my max up to 450?, will that be good enough for 2 decent amps or either one decent amp ?
Recommended Posts
Archived
This topic is now archived and is closed to further replies.