Big P Posted December 18, 2006 Report Share Posted December 18, 2006 do you like your tolit paper tucked infront or behind the dispenser what did you have for breakfast have you ever bottle feed a full grown pigmie goat do you shave your legs Link to comment Share on other sites More sharing options...
2000LaDe Posted December 18, 2006 Report Share Posted December 18, 2006 :poster_stupid: Link to comment Share on other sites More sharing options...
RichardXTC Posted December 18, 2006 Report Share Posted December 18, 2006 ok i got one now. when you placed the box on 45degreee angles and let all that resin level out and harden then put some mat or cloth over that on all the corners. couldnt you have just fitted a peice of mdf there to 45degree the corners then add some resin and cloth or mat over it. or is there any benefits either way. whats best lol to be honest i think the resin only works better because theres alot less room for imperfections i mean the material used doesnt matter one bit to the box but with the mdf it might not be 100% fitting and the angle might be slightly off ect ect. Now in steaves position that tiny thing might make or break a higher score plus he has the ablity and skill to it the perfect way so why do it differently... nothing beats gravity ok i understand putting the 45s in but then wat do you do at the corner of the box? like if i put 45 along the long corners of a box, 3 of them are going to meet at the corner of the box. wat do you do there? 2 X 15inch XTB subs1 X Solar Audio 5000dVids:<a href="http://"http://www.realmofexcursion.com/videos/XTC...dio/xtb15.1.wmv"" target="_blank">http://www.realmofexcursion.com/videos/XTC...xtb15.1.wmv</a><a href="http://"http://www.realmofexcursion.com/videos/XTC...dio/xtb15.2.wmv"" target="_blank">http://www.realmofexcursion.com/videos/XTC...xtb15.2.wmv</a> Link to comment Share on other sites More sharing options...
scratchy Posted December 18, 2006 Report Share Posted December 18, 2006 just 45 all the sides richard, you will see what happens then, it makes a kinda weird shap, but it....uhmm...fuckit, just do it and youl see :whistling: then im rambo bitch Link to comment Share on other sites More sharing options...
Ernesto Posted December 18, 2006 Report Share Posted December 18, 2006 ok i got one now. when you placed the box on 45degreee angles and let all that resin level out and harden then put some mat or cloth over that on all the corners. couldnt you have just fitted a peice of mdf there to 45degree the corners then add some resin and cloth or mat over it. or is there any benefits either way. whats best lol to be honest i think the resin only works better because theres alot less room for imperfections i mean the material used doesnt matter one bit to the box but with the mdf it might not be 100% fitting and the angle might be slightly off ect ect. Now in steaves position that tiny thing might make or break a higher score plus he has the ablity and skill to it the perfect way so why do it differently... nothing beats gravity ok i understand putting the 45s in but then wat do you do at the corner of the box? like if i put 45 along the long corners of a box, 3 of them are going to meet at the corner of the box. wat do you do there?Nothing...Resin them up, all the corners to form 45s, that is all.It will dry on it's own. Link to comment Share on other sites More sharing options...
Mmats user Posted December 20, 2006 Report Share Posted December 20, 2006 Steve check this link out http://www.stevemeadedesigns.com/forums/in...hp?topic=2546.0 Link to comment Share on other sites More sharing options...
AI James Posted December 20, 2006 Report Share Posted December 20, 2006 Steve check this link out http://www.stevemeadedesigns.com/forums/in...hp?topic=2546.0 just went there and dropped you a line Link to comment Share on other sites More sharing options...
Amalan Posted December 20, 2006 Report Share Posted December 20, 2006 hey steve or anyone who is familiar with the jl audio cleansweep i was thinking about getting it for my car but im not sure if i need it i dunno if youre familiar with my car http://www.stevemeadedesigns.com/forums/in...hp?topic=2275.0 but it has stock subwoofers so im wonderin would i need to get the jl audio cleansweep and splice the wires going to the subwoofers or would that be redundant since they audio is already being processed for the stock subwoofers and just straight splice the wires from the stock amp to the subwoofers and connect them to a new amp? Link to comment Share on other sites More sharing options...
Chode69 Posted January 2, 2007 Report Share Posted January 2, 2007 in parallel? hell no. thats .5 ohm. theyre only 2 ohm stable. you would have to do series/parallelright when i read his post first thing i thought was NOOO...way too low of an ohm load.needs to be wired like this NoFearX18 said: Nick will bang just about anything.....LMAO....pun intended On 4/13/2010 at 9:51 AM, meade916 said: i was like DAMN, Chode is hardcore! he makes james look like a friendly person LOL! trainman0978 said: I dont know who is worse with the buttholes Chode or Big P... Team Deadly Hertz / Team DC Audio / Team XS Power 2010 DC AUDIO MEMBER OF THE YEAR!!! DuckretaryFEAR THE DUCK Durangho Chodes Blowthrough Build Youtube vids Muh Wife Need DC Audio? Hit me up for pricing!!! Link to comment Share on other sites More sharing options...
audioaddiction863 Posted January 6, 2007 Report Share Posted January 6, 2007 When you make a vid what cam do you use? What would be the best one? Its all about the Install !!!! http://www.youtube.com/user/audioaddiction863 Bass Race Florida State Champ runner up 139.9 2008 Bass Boxing Florida State Champ runner up Middleweight 2008 Link to comment Share on other sites More sharing options...
Recommended Posts