kirill007

Why would he not go with a lvl4 instead of lvl 3? I would say with the the 4 if you can afford it.

what does the bump do to help?? This is interesting It reinforces the sound deaddener, just like a T-beam is stronger then a regular flat piece of metal.

This isn't really sound deadening doors as more of a howto apply CLD. I happy you show people they still have to clean the doors before applying anything even if it's the best product out there. Using CLD around the speaker openings isn't ideal, a closed cell foam would work a lot better.(or butyl rope) Another Pro tip: if you want to use the CLD to help with flexing you have to make a small bump in the middle along the whole piece. (or more bumps) Like this: ____-^-____ I like to do 1 of these bumps per 2-3 inches.

I hope people watch these video's, eventhough it's basic knowledge if you have ever studied anything related to electricity. (there are just too many people who don't understand the basics) Good job Tony, you would be a good professor.

Can anyone explain why my answers keep getting deleted? ( this is already the third post.)

If the alternator get's hot, the voltage/amperage drops.

You can run 5k on 1 battery with a 400a alternator for as long as you want..

Damn, this is a great find. I never like mixing it up, because I usually need small amounts and don't like to waste a cup and brush. Could you tell me if I would be able to find it under a other name in Europe? (could you tell me the company?)

whats the average life of a xs battery? You can't just ask that. But i'm pretty sure 5-7 years should be pretty normal. (maybe even more depending on how you use it.)

It's a very nice feature, especially since you can still choose in which section you want to sell it. (although I would probably prefer the new premium classifieds.)

If Jensen sounds better to you then the pioneer 80prs, then something is seriously wrong.

Yes, you fuse for the wire. If the wire capacity is 250A.

Skar is no where near Rockford, a lot closer to rockwood amplifiers then they are to rockford amps. EDIT: to Big-A, I am exaggerating, but you shouldn't compare a amp like that to skar, especially not if you include customer service and reliability.

Firefox here, works fast

Because he made a mistake posting the specs, the useable range is 2.2k-20khz. But usually 3-4khz is where you would want to start using a bullet/super tweeter.(so you are correct indeed.) Apparently the sensitivity is 106dB... I can't seem to find any power handling yet.

Go buy a charger for it, what would a cheap one cost? 20-30 dollar? (i'm pretty sure it's a lot cheaper then a new battery.)

blablabla blablabla I don't know if sound pressure can calculated like that. I do.

you just said it yourself, different equipment. who knows, maybe my results were a fluke, hell i dunno. i honestly hope it is a fluke. maybe im looking for something a little different out of the o-scope, i dunno. maybe im looking for different shit out of the o-scope than what my understanding is of the dd-1. ive never said the dd-1 was junk, ive said multiple times that i think it is a great tool. but chillmasterwill saw it happen in my car, and we got quite a gain out of his 4runner using the oscope over the dd-1. maybe we are just looking at something a little different. Well maybe you should show us how you do it. Did you use the CD that came with the DD-1? (not a copy or anything else.) A 6.5dB difference is a incredible difference. What was the equipment used? If you have gotten 1000W out of your amp by setting it with the DD-1, that means you needed 4500W to get a 6.5dB difference. (that's if you have no thermal compression.) EDIT: just for fun, if you have set your gains with the DD-1, and 2000W would come out of your amp, then you need 9000W to get a 6.5dB difference. (again, no thermal compression included.) See why the 6.5dB claim is so unbelievable?

Amps usually are linear throughout the whole frequency range. The difference in wattage should be nowhere near audible. So if you set it up at 40hz, it's very unlikely you'll have clipping at 30hz.(maybe 30-20hz is you have some special brazilian amp..But that's the amp that is bad) If your friend burps, it shouldn't matter that the tone clips a little. Most of the times a little clipping will increase your score because it can put out more wattage.(sometimes even hard clipping gets you higher scores.)

It's just the way kids grow up these days, very safe,behind their computer and they don't get anything done themselves so instead of being mad at themselves they are hating on other people. You are a great guy, you seem like that in every video and responses you post. I don't understand how people can't thank you after you gave them something, in my opinion that's the least you can do.(eventhough i would thank you by atleast sending a personal card/letter back.) It's hard to ignore those ignorant fucks, but you have to keep going because it will take a while till i've saved up enough to do a roadtrip to the US and meet you (and hopefully more SMD'ers.) This forum is a great place and we can be here for free, sometimes even win things so anyone who doesn't appreciate what you are doing is just stupid beyond my comprehension.

Exactly, why bother people who are still alive in another place, then on a quiet remote cemetary where nobody will complain. If people are put to rest there, why not a tire too? What about the family burying their child or other loved one somewhere else in the cemetery? That would be why it is inconsiderate. I'm pretty certain that no one was being burried at the moment of the burnout.

Exactly, why bother people who are still alive in another place, then on a quiet remote cemetary where nobody will complain. If people are put to rest there, why not a tire too?

If the alternator can't supply enough current to keep your voltage above 12.8V-13V. I hope you have a good strong stock alternator for 2000W. What alternator do you have, how much current does it produce?

It's only 250W, NOT 1000W. I want something to keep with my bass, more detailed loud voice, some one recommended beymas but Nootka sure which model. however I'm Not trying to modify my doors want to keep them stock. Each door currently consist of 1 tweeter & 8" speaker. What does the rest of your system consist of? Do you have a highs amp?