Antheny916

The DD-1+ will be in stock soon! No exact date to give out yet! You can purchase it from WcCarAudio.com, Amazon.com, & eBay.com!

Alright so here's what i did. If you look at the theme list now, there is "SMD Dark/ Mobile Friendly" and "SMD Dark"....SMD Dark should be back to normal for you. You're a gold member so you don't see the google ads that make it not mobile friendly. But for the regular members the google ads are kind of all over the place with that theme. The "SMD Dark/ Mobile Friendly" should be perfect for regular members. The ads are aligned better. Hope it's all fixed for you!

Alright, I think i've fixed the "SMD Dark" theme you were using. Try switching from a different one and then back to the SMD Dark one. Let me know if it's good to go!

I've reproduced the issue you're having and have found the solution. It's the theme you're using. I'm not sure why that theme is making it do that but i'll look into it. For now, switch over to a different theme to fix this issue. I would go with the SMD Classic Default Theme.

Have you tried emailing us at [email protected]? Or at the WCC contact page? https://www.wccaraudio.com/contact I'm the one who runs WCC and i typically reply to all emails. I'm sure i could've missed one or two here and there but most of the time i answer every single email and questions anyone has. Anyways, the OM-1 is still being built. Right now i don't have an exact estimated time to give out, but they're on the way. Along with everything else, we have a lot of stuff being built as i type this. Even VU-DIN boards have been re-vamped and possibly ready soon! We're coming up with a way to have build times cut down shorter, essentially avoiding such a long wait when we run out. But in the meantime, everything is still built by hand in the USA. You'll know when they're back in stock trust me. It will be posted everywhere the minute we have them ready! Thanks for waiting patiently!

SMD DISTORTION DETECTOR PLUS (DD-1+) The purpose of this tool is to enable the installer to set the gain of an audio amplifier to match the source unit’s output level, accurately and quickly. It can also be useful for detecting distortion in the audio signal caused by poorly designed or malfunctioning audio equipment. What is the difference between this and the original DD-1+? Sets audio system gain overlap, continuously variable from 0.0dB - 15.0dB in 0.1dB steps Checks gain overlap of an audio system without making any adjustments to the existing settings Verifies that the gain overlap of an install hasn't been tampered with after install Features our Patent Pending Distortion Detection system plus digital microcontroller and our proprietary firmware 200V maximum input (same as DD-1 HV) Quasi-RMS voltmeter (can detect clipping at any frequency) What is included? The Distortion Detector PLUS (DD-1+) Protective silicon rubber boot Calibrated Test tone CD Harness This manual Pride of ownership About the Design When you pick up the DD-1+, know that you are holding a precision piece of equipment. If treated as such it should provide you with many years of reliable service. Specification Distortion Detection trigger level > 1.0% Harmonic Distortion Guaranteed operating range of input signal is 1.2Vrms – 200Vrms. (40,000 Watts at 1ohm) Autoranging Low Battery LED trigger battery voltage < 6.5Vdc Auto-shut off timer 8 - 10 minutes after ON button is pressed Battery self-test and display of condition when DD-1+ is initialized Shipping Box 9 x 6 x 2 inches, 2 lbs Documentation: Owner's Manual (PDF) DD-1+ Test Disc Read Me (PDF) Use Coupon Code: WC1TIME to get 10% off! Purchase from our other web stores here: AMAZON.COM EBAY.COM Follow us on social media! We post all of our products updates/ Newly added items ever day!

The site seems to be working fine on all devices for me. Even at two different locations. Especially after getting the default theme all fixed up. The only problem we have as far as i can tell, is not having it mobile friendly ATM. As soon as we're able to make it mobile friendly, we will. If you see any bugs at all though PLEASE say something. Because i'm not seeing any over here lol. Also, the google Ads are now displayed in reasonable places i would say. In threads, they don't appear at the top anymore. Unless we change it later of course. The site doesn't pay for itself! If you hate the google Ads, we have membership programs to take them off! ?

You already got your answers above. But just to clarify, they won't be gone forever. It's just going to take some time. That goes for the VU-Din too. The one and only SMD Product that has ever been discontinued is the SMD DD-1 (HV). Everything else, you can expect to be back sooner or later (VM-1 & VU-Din).