98GCLimited

http://www.stevemeadedesigns.com/board/topic/85229-how-to-get-every-last-strand-of-wire-in-that-terminal/page__view__findpost__p__1167504 That looks pretty nice method I may use in the future.

When you take the vinyl wrap off that thing you gotta put curtains on the inside of the rear windows lol

Id go 2.5 or 3 wide on that port if you can fit it and keep 2 cubes net volume.

1 extra baffle is double layer on the sub face of the box only.

^ unloading?

Rated 3000rms @ 1 ohm. Runs daily at .5 ohm with good electrical. Solid amp.

Probably 4k or a lil more if your impedance rise isnt bad.

Id say the mechman 270 and 2 d3100 would be good for 5k if not more.

No shit, just noticed that. Yup got a guy helping me out on caco hes got experience with these subs has his in 5 cubes each on a 3500 a piece. Upgrading to a crossfire 8k and shrinking his box a little bit. Also a guy on there had 2 of these 15s in 12 cubes with 240sq in port and a stetsom 14k a piece peaking at 47hz did at 154+ on music lol. I figured I would build big and can shrink it if I want. But I think these like large boxes.

Ya I could see that a fullsize 1911 is a big pistol to CC.

Thanks for the input.

Building my box for Crossfire xs v2 15 on saz3000 @ .5 for now. Double layer birch box. 5 cubes net @ 32hz. Trying to determine where the sub should be on the baffle. In the center like this Or in the far corner like this I like the way it looks in the center but I think it might be better to put the sub farther away from the port and in the corner it may load better? BTW that circle of wood isnt 15" diameter its from the cutout on my old box I think its about 14" just put it there to get the point across.

Alot of people with a bigger frame than me carry them at like 4 oclockish behind the hip on the right side but Im too skinny for that so I find its best for me with it at 3oclock for the most part. Hides the grip better for me.

Ya Id get a fuse on the wire to the amp.

Damn that things moving pretty good

Damn you got split open.

Can you post pics man? I love seeing other Jeep builds

My local Staples has a couple decent laptops in the $500 range. I dont know what the graphics card is like but the HDD space is pretty good (cant remember off top of head) and 6gb ram. They were either HP or Dells I forget Im probably not much help.

Heres my UBG Striker for my Bersa Thunder9 Ultra Carry Pro. Nice lil gun I had gifted to me by my aunt. It was BNIB too Yes I know I was quite pasty in that picture

Id say option 1 out of the two. Plenty of port area if they are true aeros and not just straight pvc pipe and more volume tuned lower. Will hit the lows better and move more air I think. Kinda hard to say unless you build it and try it out tho and I have no experience with RE subs so take it for what its worth.

Nice s10 drop a 350 in there and have yourself a sleeper.

Not bad

Sure everyone knows these things. Rated 3500 @ 1 ohm runs daily at .5 on good electrical. SOLID amp. In title I said v1 but its the v2 heatsink actually but I am pretty sure the internals are the same just the heatsink design is a little different.

These (v1) were supposed to be the good board. Solid amp. Rated 1750 at 1 ohm runs at .5 daily on good electrical.

I dont think you could really go wrong with any of those 3 they all look like great shotguns.