audiofanaticz

congrats winners

Your on the list.. https://instagram.com/p/7vhDp1IBa8/

I know you can run active on a 80prs, but I do not know if it will allow you to run it in bandpass mode which is what you will need (BPF mode on your amp) which means you will be using the LPF and HPF together to dial in the speakers frequency response.. If they are neopro v1 10s you will want to cross them over at 80 and 5000. If they are the neopro v2 10s you can cross them over a bit lower 60 and 5000. I run my neopro v1 8s down to 73hz iirc in my truck without issue.

Shared on Facebook.

Chances are the motor is not as much misaligned as the recone is. You have a good 1/8th inch of movement either way when you glue your spiders to the spider landing (same for the surround landing). So when you bolt on a basket that is prebuilt like tantric offers, it was probably shimmed out right for said woofer they have used for building, but something little off will cause a lot of damage. You could take that same assembly they built and spin it around 6 different times so each basket hole is infront of a different motor hole and it could have a completely different outcome. This is one of the reasons why TC sounds had special threaded on adapters to make this not an issue.

Dont think it has anything to do with the tantric, he wants to build a custom 24inch sub.

how much you want to spend on a motor?? lol

Still parts, and they wont do it. Others have tried before. So you would have to buy used.

DC wont sell you softparts unless its a pre-built recone. Most companies wont for that matter. A couple companies will sell parts to a select few people though.

swore I was already following the page, am now.

your a couple days too late.

The list is not 100% up to date. If prices have not changed the price for a X8 drop-in recone is $60.00 (that is for dual 2ohm or dual 4ohm coils). If you do not want to clean your current basket and would rather buy a new one add an additional $15.00 The price does not include S&H, which will be also added to the total. You can email Bryan at [email protected] to order a recone. Please include the following information: 1) What you are ordering -- Model, Coil Configuration, Etc. 2) If you already have a basket or not; please check below for any special notes. 3) If you need ANY custom options please specify up front. 4) !!! YOUR ADDRESS AND NAME !!! 5) A picture of what you have goes a long way to be SURE we are talking about the same thing. 6) When you send payment include ALL details of your drop-in on the notes(model, size, coil configuration, options, etc)

^^^ Think he was just quoting the guy who was wondering who got closest.

thanks. someones gotta do it. lol

Since they are on the signal input (rca) and not the speakers themselves which get disconnected during tuning you should remove them. This way a full pass signal is allowed through. The directions say to have eq's set to flat and crossovers set open or full pass.

That crybaby continued to cry in his build log, and was saying how he will no longer use the site and how he lost respect and blah blah blah. So I locked it.

well damn, you got that much! I shouldnt have passed it along to the second person that liked his post. jk. I wouldnt feel right winning since im an admin//mod.

?

I would assume that since so many thousands have already sold that things like the patents, the tooling for the injection molding dies, the tooling for the circuit boards which all cost thousands to 10s of thousands each have had the majority if not all costs covered.

Does this include 3d printed volt meters??

Hard to tell, is the whole "rope" piece sticky? I cant really tell from the pictures, but Im assuming the paper layer is just to prevent itself from sticking to itself while coiled. Ive been looking for something similar for when I crack off the OEM headlight lenses after baking them in the oven for doing projector retrofits.

So thats who stole my dyno, my batteries, and my intelli chargers! Shame on you SonicElectronix!! I will be sending a pre-paid box for you to ship the amp dyno back to its rightful owner, you can keep the rest. Thank you!