Amart88

Really? a gallon weighs the same? I'm pretty sure a gallon of cement weighs more than a gallon of milk...

I would just do what sayhuh said and look at the Pac LC-1's. That's what I have, I never had much luck with those remote knobs.

I go to pay a Fedex bill over the phone and she puts me on hold for 10 mins... Fuck that.

Ok, Thanks

I know this has probably been asked before but what is the proper amperage setting on the charger to charge a d2700 or xp3000? 5, 15, or 25? Thanks. I charge them individually as they are being stored indoors right now.

I'm getting this problem also as i speak. I'm running Firefox 18.0.2. Posts won't refresh, either will edits. If I click the post icon twice because I am not sure if it posted it makes a double post.

Will the xs power 580 brass terminal post adapers work with the xs ibar 555 or others? Thanks going on d3400

ok thanks

I had my old battery sitting in a barn for over a year but it seems to still be holding a charge, can I use my intellecharger to charge an ACDelco lead acid battery? If so what would be the best setting? Thanks It's the big red charger.

Yep pulled the fuse, worked like a charm. Thanks

Ok. So just take the anl fuse out.?

So i remove the amps Ground from the battery first and then unhook everything else? Is that correct? To unhook my batteries grounds would take a very long time.

See. Everyone says something different. And yes I have multiple batts. But i have buss bars

Stupid question but what is the PROPER way to safely remove an amp from your car? Do you remove the ground first? from the amp or the battery? also with positive?. It's been a while since I removed them, don't want to ruin anything. I hear so many ways to do it but there should be the right way. I was not sure if I could just take the Power and ground out of the amp terminals or if they had to come off the battery first. Same with installing them? Thanks

Yea but that would be 8 wires as each coil has its own wires. could i just run one coil from each woofer to one amp? The box is center port tuned 33hz with each driver seeing just shy of 4 cubes. port in 17.5 deep 21" tall and 4.5" wide. If I go to clam my amps, do i put both pos wires in the clamp meter?

Yes, I have a clamp (need some help on using it) Both amps settings are identical, Phase is off on both amps (they are not strapped) Yes I did a pop test for each coil. I held the neg wire on the nef of 9v and touched the pos and the cone moved out. I did that for all of them. if they all poped the proper direction it seems like the amp... try what I sujested above with 1 amp to both subs to see if they will play the same, if they still do react the same ur wiring is off Yeah, I don;t know as i have each woofer paralell. so 4 wires from each. 2 neg 2 pos. I am betting on the amp. As with 7000 watts and only one 270amp alt i get very little voltage drop. Always thought that was good but strange. In order for me to wire both up i would have to tear apart everything and its like 100 degees oout there today so. I also had them strapped before if that means anything. They worked but the woofers both did not move very much.

Yes, I have a clamp (need some help on using it) Both amps settings are identical, Phase is off on both amps (they are not strapped) Yes I did a pop test for each coil. I held the neg wire on the nef of 9v and touched the pos and the cone moved out. I did that for all of them.

i don't think so. I can't remember. I have a clamp meter but cant seem to figure it out. I also tried just that amp. and there was no bass at all and then after a while it came back. but still barely moving the cone with it cranked.

Push terminals also heaty shrinked on. I just swapped amps and now the other woofer is moving less (opposite. So it may be something with the amp?

I was out working on my amps in the trunk and i noticed that I could hear little slurping, gurgling and chirping sounds coming from my batteries. Is this normal? I have 2 xp3000s and a d2700. It is a hot, humid day out but this was in the garage out of the sun.

A little update on this, I just went out and checked all my impedences for my woofers and all the coils are reading 1.4 so thats off the list. Also the amp that gets warm goes to the woofer that moves less. next i'm going to swap amps and see if the problem persists. I will let you know what I find out. They are not out of phase at all there is just a huge noticable difference in movement. If the problem still happens to the other woofer when I swap amps, what would be the next step?

No I haven't. Do you do each coil seperatley? I am sure they are in phase though as I checked before a few times. Theres A big loss when they are out. Box is about 3.8-4 cubes for each woofer