Jump to content

Bump4life

S.O.T.M. Winner
  • Posts

    4665
  • Joined

  • Last visited

  • Days Won

    1

Everything posted by Bump4life

  1. the cable running to my batteries is 4 gauge and I havent done a big 3 yet until I swap out my engine for the zetec so I can upgrade the alternator from the stock. 4 gauge all the way, 4 gauge from the 2nd battery to the distribution block, and 4 gauge to the t1500 amp, but 8 gauge for my component amp since I cant fit anything bigger in it id put a lot of money on it that that is your problem. im surprised that your mono amp doesnt tank first. yea man that t1500 puts out more than rated or at least tries to. upgrade all that wire to batteries to 0 gauge, and do big 3 0 gauge and i bet that solves your problem. the 8 gauge to the highs amp is ok. edit: when you upgrade your alternator you definetly need all 0 gauge in your charging system because more than likely your H/O alternator will put out more amps than what your 4 gauge is rated to handle
  2. what gauge wire do you have running to your batteries? is your big 3 done in 0 gauge OFC? is your wire from front battery to rear battery 0 guage OFC? then what size wire runs to amp? my friends car had major voltage drop (he dropped into the 9.5 range) and that was due to him using 4 gauge to amp and batteries in back. he swapped out all 4 gauge and went 0 gauge even to amp and now he ddrops to 12 minimum standing.
  3. i think i know who/what you are talking about? any furthr details? does d'amore come to mind?
  4. agreed about equal and better to for cheaper!! and i guess i wasnt here early enough to see all JL build logs haha
  5. got my old avatar back!!

    1. HatersGonnaHate

      HatersGonnaHate

      So are all the GIF avatars working now??

    2. carshateme

      carshateme

      No, just some.

      You gotta go through multiple sites to find one...and most of the time you don't get what you really wanted.

  6. just don't worry about people hating on JL. this forum in general hates JL with a passion just because they are so expensive. which they are expensive, but who cares. if you have money and thats what you like, buy it
  7. noppeee
  8. doesn't sound like vs? he is just asking if he puts dual inputs on a 3500 watt amp will it help? i wish i knew. i kinda want to know too.
  9. yes. if you go CCA go with 0 gauge for your main run. OFC can carry more current. if you only get CCA 4 gauge you will only be able to carry 100Amps max-120A the OFC can most likely carry up to 150A maybe a little less. i havnt done actual testing. if you go CCA go 0 gauge. if you go OFC you can get away with 4 gauge
  10. ill post up once my RA is gone. he gets pissed.
  11. i do. ahah i wake up (and wake my neighbors) to some songs that bump and shake the place down. hhaa ill do videos if anyone is really interested. its cool to see dorm dor going ham
  12. i feel a little more love should come this way. bump if you like U of M!!
  13. all bout that i motor. even though i have 2 f motors right now ahhaa
  14. no probs man get some pics and vids up of system when your done. ive always liked JL audio highs and bass. i used to have a JL J2 500.1 before my current setup and i couldnt be happier with size and fidelity of my JL 400/4
  15. it can be larger just not smaller. the same size is ok. so if you are running 4 gauge OFC power you will want 4 gauge OFC ground yes OFC = oxygen free copper. just some advice, go with this http://www.knukonceptz.com/productDetail.cfm?prodID=KFX4BL that is some good wire for the price.
  16. this thread is really a good place to blow off steam now that we have to be proper and polite to all new or uneducated members:)
  17. excellent idea. and especially excellent idea for grounds. just make sure if you are using 4 gauge to get OFC 100%
  18. i mean for the power you are running you really should only need one run of 4 gauge OFC to the back maybe 1 run of 0 gauge CCA to a distribution block. then just fuse at distribution block. mini anl should do well. and yes they have wiring kits
  19. no man. he can use what ever fuses he wants. those amps dont have any fuses on them or at least user accesible. so all you need is one inline fuse per amp. can me mini anl anl or what ever
  20. buy from darvex.com or knukonceptz.com. they have all your electrical needs
  21. use what they say. 50 amp fuse for 4 channel 30 a for each mono block inline fuses btw
  22. right because the stock wires tahst arw usually 8g or smaller can supply say 4g wire... NOT the big 3 is a mUST for any system no matter how big or small it is..VOLTAGE is the key in any system im saying he doesnt need to run 0 guage power wire to his amp. it would be overkill and a waste of money. the only reason to do is if he would ever upgrade. 4 gauge power wire would be more than efficient. and he could use 4 guage for big 3 too if he doesnt plan on upgrading. but 0 gauge is always better.
  23. you don't need 0 gauge power for a 800 rms amp. you almost dont need the big 3. once you do big 3 and if you have a good bat you should be fine. depending on youfr headlights you may always get some dimming. switch to hid! edit: civic is refering to mechman, good guys.
  24. well it is only a matter of time b4 n8 gets to this and sees its in wrong section
×
×
  • Create New...