Smoove

D3100's or even XP3000's . Group31 is battery size

the RF T8002 series is power hungry. I'd go with 2 group 31's. Definately upgrade the alt. Call Mechman. they have great service

From Tony's FB page just use the speaker + and - for whatever channel you are trying to check. Don't use battery ground. We revised that procedure.

The 3400 is great battery. If you can fit a d3100 or an XP3000, I say make it happen.

XS says do each battry individually. I did 6 battery still connected to everything , no problem.

During the summers in PHX. My Powermaster used would drop to 13.7 when it was 105+ out. Winter it would charge at 14.6. both numbers are while driving

I think batter 1 is gone. Battery 2, might have a chance with a reconditioning charger. And spending the money on a good charger is always a good idea. I have a schmaker with a reconditioning mode and a start mode for my daily agm batteries. My batter bank get charged with a XS PSC 15 ( 6 batteries ). I don't have any cheap non AGM batteries in any of my rides

put them in the Mustang to power those HX2 18's

:wackit3: :wackit3: :wackit3:

the wait is killing me.

When demoing, I'd set it at 14.7 at idle. And then put it back to it's hot temp of 13.8 at the end of the meet. I live in PHX, you dont wanna charge hot batteries at high voltage for too long. I run a Mechman 370 now

I used the AVBM on my Powermaster 200amp alt. but I only turned it up at Bass meets or competitions. http://www.mechman.com/accessories/voltage-control-modules/adjustable-voltage-boost-module-for-gm-4-pin-oval-plug/

ill give you a clue...Fosgate never "joined" with "Rockford". Rockford is actually the street they are on and that is how they got their name. Most people don't know that Now you know! I was gonna correct that until I read this.

If the vehicle is running with decent Alts , that battery is supposedly badass.

Good question. When you try it, please post results

Very nice. People have been asking for a mounting kit or bezel for the Vu-Din for years. some tint over the meters would also be nice. those things are bright. thats why I did mine behind 2 way mirror.

Pot to Kettle

How is this thread still going. OP, I like your enthusiasm, but what you want has already been tried without great results. Buy the new Team or SP4 12 and call it a day. Or as CleanSierra says, get the one with the crossfire logo. https://www.facebook.com/163751923651416/photos/a.636710266355577.1073741825.163751923651416/1216919605001304/?type=3 https://www.facebook.com/163751923651416/photos/a.636710266355577.1073741825.163751923651416/1202889886404276/?type=3&theater Were delighted to announce the forthcoming release of the TEAM Series in a 12" platform. Featuring a 6 spoke custom tooled aluminum frame designed for the FOAD lead system and monster motors. US made extra wide roll multi-layer foam surround featuring reinforced surround and cone joints for insane control and travel, along with 4" US made coils available as Dual 1 or Dual 2 Ohm with power rating of 4000wrms. All the same great features of the larger 15" and 18" TEAM drivers in an optimized 12" package. These will be available to purchase at the end of November.

Again T2000 infrasonic filter is at 28hz.

infrasonic/subsonic filter is your friend

Some additional info. T2000 amps are more efficient at 2ohm. On average the birthsheets show 2400ish @2ohm and 2300ish @1ohm. Also infrsonic filter is 28hz, do you have it turned on? Are you trying to play below tuning? I not sure what the power rating is for the XL.

Don't overkill it. I did, it's a waste of money.

11780

watched the video. I don't wanna be a hater, but I'll wait for the Diamondboxx Jr. The Astro has a ton of highs. but I am a Diamondboxx owner

thats impressive.