john253a

Personally I like mine in 0.6 net each With either a single 3" per or 4" for 2 And for slot 9.5"sq per

? Bump

1x 3" per sub or 1x 4" for 2 subs 1.45-1.5 is a bit high for that much power shoot for 1.2net with 2x 3" ports side not with both of them port @ 17" in 1.2net your going to be @ 41hz so youll need to extend them 27" each for 33hz you could do 1x 3" @ 13" 32.5hz long but you may get some port noise, if its in the trunk you may not notice or care just beware it might be there and idd use the soundstreem @ 2ohm giving 450 a piece

Are you pre selling outside of the states maybe to Australia? If so 3 d2 and a 2k to 3029

Yep no problem But box, and clean power are the key

considering the x10 is 1200 delivered to my door on preorder, idd consider less for bigger a good price

There called Torres Google sketch up Winisd All free and all do very well

that amp makes 500 @ 4ohm, 1k @ 2ohm they should go pretty dam good at idd say the problem isnt with the amp, its the wiring/coil config, and box sort that out first, post some info on both then and only then blame the amp

any news?

i found mobile didn't work, but if you go down to bottom of page when mobile, and open the full site and reply in full site, it was ok

After a good bass remix if theres any around, david guetta ft sia "she wolf"

Sorry it might only work on pc It doesn't work in iPhone

the pic is draw with a 1/2" base, so just change it to 3/4" (the person i drew it for had it in a tight area)

try this then https://docs.google.com/spreadsheet/ccc?key=0AsFyH9hGFoZydE9TaThIeGdTd3Nib1ViWm54NnNkWGc#gid=0

Depending side clearance, Port accross the bottom out the side maybe a better option

So you want to go from 7net to within 7gross with a lower tune Can't work out the tune but idd want to aim for 5net @28hz with 75-80sq" of port

It's for doing skirting boards and capping on wood walls and stuff It normaly comes in a few hard wood selections and pine I use the concave cornes, in some boxes, and resion over the top for a smooth curve on the corners, There will be other sizes as well, I'm just not sure what store your way will stock,

You can buy 3/4x3/4 45deg at hardware for store for $2 per 3ft It's in the edging section, They also do concave radius as well

http://www.stevemeadedesigns.com/board/topic/116191-team-sundown-russia-160-db-no-wall/ The ns18 if your intersted in that as well

Why not 4x 15's Same net more cone More info also, zv3 if space is limited

it would all be facing foward sealed off from trunk, if you made it straight, you may have a harder time getting the subs in, but you may be better waiting for some more to chime in with blowthrought experance.

for 6-800 for everything, youll easyll get 2x12 or even 2x15 and a good amp

Without drawing it to see it it fits, You might fit a blow thtought style box sub face in port centre, all forward

its even easier than that, as all kicker specs include the displacement of the sub