Are my box specs going to work, Single SA-8 v.1 D4

[newb4976]

I basically just want to know if this design will work for my sub, my only concern is the port area, i know 14in of port per cube foot is ok, but it only has 8.5 in of port area, so comment if its good, or bad. Thanks.

Sundown SA-8 D4 v.1

Wired at 2 ohms getting about 550 rms

10x23x12 box dimentions

8.5x1x30 port dimentions

34.29 Hz

.64 cubes after sub and port displacement

8.50 inch port area

13.28 inches of port area per foot

[newb4976]

soooooo yeahh

[Joe X]

Give it 14.5-16 square inches per cube.

[newb4976]

i can go these specs:

10x23x11.5

8.5x1x28

14.41 inches per cube foot

.59 cubes after displacment

35.72 Hz

Would that be a better option? cause i really would not like to go above 36 hz.

[Smoove]

Download the Torres box calc and play with the deminsions

[Joe X]

34-36Hz is ok. and 0.6-0.7 cubes net is also ok.