Srh_rider12 Posted June 25, 2012 Report Share Posted June 25, 2012 a comp in the 24's and 33's ?? your better off tuning way higher good sir Build Log ----> http://www.stevemeadedesigns.com/board/topic/137987-04-chevy-silverado-build/page__fromsearch__1 Link to comment Share on other sites More sharing options...
newb4976 Posted June 25, 2012 Author Report Share Posted June 25, 2012 And without knowing what the maximum dimensions YOU have available and the power you are running, we can't do very much... Also: good luck getting lows with a kicker comp. i said around 24-33 hz right? thats not extremely low, and i just blew my kicker 10 and it hit 25hz alright. Link to comment Share on other sites More sharing options...
newb4976 Posted June 25, 2012 Author Report Share Posted June 25, 2012 a comp in the 24's and 33's ?? your better off tuning way higher good sir i had a 10 kicker tuned to 33hz, sounds good. Link to comment Share on other sites More sharing options...
newb4976 Posted June 25, 2012 Author Report Share Posted June 25, 2012 way too much port area. 67 inches of port is too much? its only like 16 per foot, well i cant do anything different then that, cause im at a stand still, hence this thread, for help Link to comment Share on other sites More sharing options...
Srh_rider12 Posted June 25, 2012 Report Share Posted June 25, 2012 if it sounds good to you thats all that matters Build Log ----> http://www.stevemeadedesigns.com/board/topic/137987-04-chevy-silverado-build/page__fromsearch__1 Link to comment Share on other sites More sharing options...
newb4976 Posted June 25, 2012 Author Report Share Posted June 25, 2012 if anyone has plans, or an idea to do around 4 cubes, and 33-36 Hz, without having so much port area, it will save me a lot of brain bleeding. Link to comment Share on other sites More sharing options...
Kranny Posted June 25, 2012 Report Share Posted June 25, 2012 way too much port area. 67 inches of port is too much? its only like 16 per foot, well i cant do anything different then that, cause im at a stand still, hence this thread, for help no...you just said in post 9, its 18sqin per cube. where did you get 16 from? you're telling me you cant shrink the port width down by quarter inches? 4.25? 4? Link to comment Share on other sites More sharing options...
SnowDrifter Posted June 25, 2012 Report Share Posted June 25, 2012 i came up with 16.5 x 38 x 20 port 15 x 4.5 x 35 3.76 cubes 34.02 Hz 17.95 inches of port per foot Will this be ok? Not sure where you got your numbers from.. But here is what I come up with ~~~~~~~~SAY NO TO PHOTOBUCKET~~~~~~~~ Snow's DD-1 tracks here: https://www.stevemeadedesigns.com/board/topic/167433-snows-dd-1-tracks/ My take on OFC vs CCA: https://www.stevemeadedesigns.com/board/topic/110381-things-that-piss-you-off-in-the-car-audio-world/?do=findComment&comment=2461444 Link to comment Share on other sites More sharing options...
newb4976 Posted June 25, 2012 Author Report Share Posted June 25, 2012 way too much port area. 67 inches of port is too much? its only like 16 per foot, well i cant do anything different then that, cause im at a stand still, hence this thread, for help no...you just said in post 9, its 18sqin per cube. where did you get 16 from? you're telling me you cant shrink the port width down by quarter inches? 4.25? 4? i dropped the port from 15 x 4.5 to 15 x 4.25, now it 16.6 inches per foot, instead or 17.95 inches per foot, bu now the box is a little bigger, which is all ok, but the Hz dropped to 32.79 Link to comment Share on other sites More sharing options...
newb4976 Posted June 25, 2012 Author Report Share Posted June 25, 2012 i came up with 16.5 x 38 x 20 port 15 x 4.5 x 35 3.76 cubes 34.02 Hz 17.95 inches of port per foot Will this be ok? Not sure where you got your numbers from.. But here is what I come up with i got different numbers then you because my port was 15 x 4.5, not 15 x 4 Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.