deathcards Posted September 17, 2013 Report Posted September 17, 2013 fixed driver's side speaker connection came off edit* door panel off and on in 15 mins. woot woot skar sk2500.1 0 gauge power and ground kunukonceptz alpine HUvxi65 components on BA gt-275new build log -> http://www.stevemeadedesigns.com/board/topic/150642-project-d-kon-deathcards-build-log/#entry2148821 2 x-15 sundowns singer alt, odyssey bat, and maxwell ultra caps
Moreno93 Posted September 17, 2013 Report Posted September 17, 2013 I've done a couple things in the past couple days.. Pulled out both my front bucket seats and fixed the play in the seat (power seats) Seats would shift back when i hit the gas and shift foward when i braked. replaced recliner motor on passenger seat.. Re did wiring to head unit, Bad ground.. But chose to redo everything so it looked better. Fixed connection on driver side Speaker, only the tweeter was working.. wire came a bit loose. Installed HID's for Hi Beams (offroad use only) Set up Low Beams to stay on when hi beams are turned on. (Offroad use only) And cleaned the oxidation off my headlights.
KillaCam Posted September 21, 2013 Report Posted September 21, 2013 Changed the oil, I wanted to get more done but I just don't have the energy. And the fact more than one person agrees does not make it a circle jerk, it makes it a bukkake scene and you're in the middle Chick took 3 shots of Jager, and then, pissed in my mouth.. B5 Passat Build Log
Rockford96 Posted September 21, 2013 Report Posted September 21, 2013 Got my new bumper on and lined it up My setup, Digital Designs M80 3 Re audio 10's ported tuned to 36 hz Kenwood x-696 SHCA 0 gauge Polk audio coax running off hu
masterbusa2 Posted September 21, 2013 Report Posted September 21, 2013 buffed headlights with toothpaste a drill and a towel xD fixed ac just needed 2 cans of coolant, Found out I have a Broken Leafspring Oh the joy! lol and took measurments for my new box #Excited :D
SnowDrifter Posted September 23, 2013 Report Posted September 23, 2013 Weather is getting colder. Piston slap is getting louder. Took off my muffler to drown out the sound. Ghetto? Yes. But it works while my stereo is in-progress ~~~~~~~~SAY NO TO PHOTOBUCKET~~~~~~~~ Snow's DD-1 tracks here: https://www.stevemeadedesigns.com/board/topic/167433-snows-dd-1-tracks/ My take on OFC vs CCA: https://www.stevemeadedesigns.com/board/topic/110381-things-that-piss-you-off-in-the-car-audio-world/?do=findComment&comment=2461444
CDetty Posted September 24, 2013 Report Posted September 24, 2013 Started assembling my new box last night, today I just have to put the subs and ports in and I'll have my bass back! (: 1999 Honda Civic- RIP 2003 Acura RSX Type-S
big dee Posted September 29, 2013 Report Posted September 29, 2013 I finally got off my ass and put my s10 back in the the shop . Rockers and bottoms of the body was starting to rust sitting on the wet ground.
n8ball2013 Posted September 29, 2013 Report Posted September 29, 2013 changed out the bad idler pulley. made a video THERE IS NO BUILD LOG! 1998 Chevy Silverado ext cab Alpine CDA-9887 4 Team Fi 15s 2 Ampere Audio TFE 8.0 2 Ampere Audio 150.4 3 Digital Designs CS6.5 component sets Dual Mechman 370XP Elite alternators inbound! 8 XS Power d3400 6 XS power d680 Second Skin Stinger Tsunami Wiring Sky High A Real Voltmeter not a piece of shit stinger.
sprkn_ranger Posted September 30, 2013 Author Report Posted September 30, 2013 I checked all fluid levels in both the ranger and tahoe, then added a bit of seafoam to the oil on both and did the injector drip though the brake booster line on the ranger to clean the injectors and pistons up a bit...I'm hoping for a little bit better fuel mileage since I've been commuting a lot more with it lately (lost my carpool buddy lol) Check out my build log! 4 Havocs in a blowthrough http://www.stevemeadedesigns.com/board/topic/187506-sprkn-rangers-blowthrough-build/
Recommended Posts
Archived
This topic is now archived and is closed to further replies.