SnowDrifter Posted May 25, 2013 Report Share Posted May 25, 2013 Could you do a comparison between soldered terminals, crimped lugs, and lugs/terminals that are squeezed on with a bench vice / some pliers?I have a crimper I could use to either loan out to you guys or make some connections on some wire and send that down 2 Quote ~~~~~~~~SAY NO TO PHOTOBUCKET~~~~~~~~ Snow's DD-1 tracks here: https://www.stevemeadedesigns.com/board/topic/167433-snows-dd-1-tracks/ My take on OFC vs CCA: https://www.stevemeadedesigns.com/board/topic/110381-things-that-piss-you-off-in-the-car-audio-world/?do=findComment&comment=2461444 Link to comment Share on other sites More sharing options...
zydrix Posted May 25, 2013 Report Share Posted May 25, 2013 i like this idea. tuned in for it if they can do it. Quote My build 98 s10 2.2 3 american bass HD 15s with psi soft parts. (on there way here) atomic at-3000.1 (soon) 146.2 outlaw @39hz., bad alt an bad batt when termed (old 2 12" build) alpine 6.5s in doors infinty 4x6s in dash. clarion cz201 HU. mechman 240a H/O alt stuff i still need. SHCA 2/0 wire SHCA 1/0 to 2/0 adapters Atomic AT-3000.1 Lots of sound deadner new mids an highs, still debating on what to do. A few Deka g31 batts. Link to comment Share on other sites More sharing options...
Swordlordboy1234 Posted May 25, 2013 Report Share Posted May 25, 2013 This! I think tony would jump on this challenge. His videos are awesome Quote My old YouTube channel : http://www.youtube.com/user/SwordLords1234?feature=mhee My old build log : http://www.stevemeadedesigns.com/board/topic/161872-96-accord-b2-sundown-sky-high-dc-power-re-re-build-for-heatwave/page-37 My New Build - http://www.stevemeadedesigns.com/board/topic/207041-2016-mazda-6-sql-build/ 2016 Mazda 6 Touring JL Fix 86 - OEM signal correction B2 prototype DSP 6to8 B2 Ref63 - 3 way active set 2 B2 Class H quattro's 1 B2 Zero.5R @.5 2 B2 HNv3 12 d2 B2 SLIP40 - Lithium in the trunk Northstar Group 35 under the hood 100ft 2/0 welding cable 30ft 4ga welding cable 20ft 8ga welding cable All stinger OFC speaker wire Soundrive custom RCA's Tons of attention to detail.... Can it be perfect? Link to comment Share on other sites More sharing options...
hdorre Posted May 25, 2013 Report Share Posted May 25, 2013 I like this.. Great idea! Quote On 5/8/2011 at 7:38 PM, Kranny said: On 5/8/2011 at 7:35 PM, 'Maxim' said: It hurts me inside when I read stuff like this and remember you're 15 LMFAO so true Mitsubishi 3000GT (Old Build) Headunit: Pioneer 80PRS Frontstage: (2) McLaren Audio MLT-2 Tweeters & (4) PRV Audio MR Series Neo 6.5" Mids Substage: 4 15" Hybrid Subs - Tantric Motors & Sundown Softies Amps: Banda 2.4D Amp (Tweets), American Bass VFL 350.4 (Mids), and (2) Ampere 3800s Electrical :Singer 260A Alt & JY Power Lithium 2005 Chevy Colorado Ext Cab Headunit: Pioneer 80PRS Frontstage: 4 PRV 700Ti Tweets & 6 10" Delta Mids on 3000wrms Substage: 6 Fi BTL 18s in a 4th Order Walkthrough on 3 Wolfram 4500s Electrical: Singer "390" and JY Power My Official Feedback Thread Link to comment Share on other sites More sharing options...
bkolfo4 Posted May 25, 2013 Report Share Posted May 25, 2013 A combination of crimp and solder works best. 1 Quote Current system: 1997 Blazer - (4) Customer Fi NEO subs with (8) American Bass Elite 2800.1s Previous systems: 2000 Suburban - (4) BTL 15's and (4) IA 40.1's = 157.7 dB at 37 Hz. 1992 Astro Van - (6) BTL 15's and (6) IA 40.1's = 159.7 dB at 43 Hz. Link to comment Share on other sites More sharing options...
CNF Kevosinn Posted May 25, 2013 Report Share Posted May 25, 2013 A combination of crimp and solder works best. thats what I do on every connection. works great Quote *** SuperSeller Status Verified *** ( http://www.stevemeadedesigns.com/board/topic/25829-super-sellers-buyers/ ) "kevosinn's" astro van 8 custom Sundown Zv4 18's 4 Sundown scv 6000's CNF Distribution CNC parts Skyhigh wire some batteries SMD Meters and tools used on the installhttp://www.stevemeadedesigns.com/board/topic/172877-kevosinns-vanwest-coast-skyhigh-car-audio-vehicle/ 16,000 watt walled silverado build.http://www.stevemeadedesigns.com/board/topic/161965-walled-silverado-4-hdc4-15s-4-crescendo-3500s-and-much-more/ 8,000 watt 1999 Subaru legacy outback. Build log here: http://www.stevemead...ru/page__st__60TEAM CNF Distribution Link to comment Share on other sites More sharing options...
WastedTalent Posted May 25, 2013 Report Share Posted May 25, 2013 A combination of crimp and solder works best. thats what I do on every connection. works great some of us don't have that type of hookup, word? lmfao. but no, that's what I'd do if I could tbh. Quote Sheena = pedobear Link to comment Share on other sites More sharing options...
TaylorFade Posted May 25, 2013 Report Share Posted May 25, 2013 (edited) A combination of crimp and solder works best. Sooo... you want your copper or aluminum shielded with... a shitty conductor? Silver solder (contrary to it's name) has 16% of the conductivity of copper. No thanks. Ill crimp. Edited May 25, 2013 by TaylorFade 1 Quote Link to comment Share on other sites More sharing options...
SnowDrifter Posted May 25, 2013 Author Report Share Posted May 25, 2013 A combination of crimp and solder works best. Sooo... you want your copper or aluminum shielded with... a shitty conductor? Silver solder (contrary to it's name) has 16% of the conductivity of copper. No thanks. Ill crimp. Could you give some info as to where you are coming up with these numbers? Quote ~~~~~~~~SAY NO TO PHOTOBUCKET~~~~~~~~ Snow's DD-1 tracks here: https://www.stevemeadedesigns.com/board/topic/167433-snows-dd-1-tracks/ My take on OFC vs CCA: https://www.stevemeadedesigns.com/board/topic/110381-things-that-piss-you-off-in-the-car-audio-world/?do=findComment&comment=2461444 Link to comment Share on other sites More sharing options...
TaylorFade Posted May 25, 2013 Report Share Posted May 25, 2013 A combination of crimp and solder works best. Sooo... you want your copper or aluminum shielded with... a shitty conductor? Silver solder (contrary to it's name) has 16% of the conductivity of copper. No thanks. Ill crimp. Could you give some info as to where you are coming up with these numbers? http://eddy-current.com/conductivity-of-metals-sorted-by-resistivity/ 100.00 2 Copper, Pure 16.60 1 Silver, Tin Solder Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.