DJ JDub Posted July 8, 2013 Report Share Posted July 8, 2013 What brands are everyone using for HID's and where did you get them? Link to comment Share on other sites More sharing options...
SilveradoDeath Posted July 8, 2013 Report Share Posted July 8, 2013 i get mine off ebay. i look for any set with digital slim ballast, and that are $40 and above. Link to comment Share on other sites More sharing options...
lolitskasey Posted July 8, 2013 Report Share Posted July 8, 2013 I uses DDM tuning, I have never had a problem with them over a year and still going strong. Link to comment Share on other sites More sharing options...
hdorre Posted July 8, 2013 Report Share Posted July 8, 2013 I "used" (if you can even consider that) DDM Tuning.. But I got fed up with the multiple bulbs and ballasts going bad over the course of a few months. I upgrades to XenonDepot. Sure, it was more money.. But worth the lack of headaches. I'm sold. On 5/8/2011 at 7:38 PM, Kranny said: On 5/8/2011 at 7:35 PM, 'Maxim' said: It hurts me inside when I read stuff like this and remember you're 15 LMFAO so true Mitsubishi 3000GT (Old Build) Headunit: Pioneer 80PRS Frontstage: (2) McLaren Audio MLT-2 Tweeters & (4) PRV Audio MR Series Neo 6.5" Mids Substage: 4 15" Hybrid Subs - Tantric Motors & Sundown Softies Amps: Banda 2.4D Amp (Tweets), American Bass VFL 350.4 (Mids), and (2) Ampere 3800s Electrical :Singer 260A Alt & JY Power Lithium 2005 Chevy Colorado Ext Cab Headunit: Pioneer 80PRS Frontstage: 4 PRV 700Ti Tweets & 6 10" Delta Mids on 3000wrms Substage: 6 Fi BTL 18s in a 4th Order Walkthrough on 3 Wolfram 4500s Electrical: Singer "390" and JY Power My Official Feedback Thread Link to comment Share on other sites More sharing options...
kickass audio Posted July 8, 2013 Report Share Posted July 8, 2013 futurevision hid for mine. They work great other than my one ballast I have an issue with how it doesn't want to turn on when my voltage is higher than 14.8v. They are pricey but have lasted me great for the 3 years I have had them (except for that oddball ballast that they said had no problem...) 2004 GMC Envoy1 XS power S3400 batt under the hood and 4 XS Power D3100's battery installed in the rear by the amps0 gauge power wire from front to backAlpine iva-w205 touchscreen dvd/cd/mp3/ipod/am/fm/gps headunitSundown Audio SAX-200.4 amp for my mids and highs8 gauge speaker wire from amp to woofer270 amp Mechman AltRockford Fosgate T1652-s component speakersRockford Fosgate 3Sixty.2 sound processorRca's from Rockford Fosgate and Monster Cable14 gauge speaker wire for the mids and highs1 18" Ascendant Audio SMD Dual 1 ohm with custom Black & Blue carbon fiber and hand signed dustcapBox: 5.66 cubic feet net volume box tuned to 30.13Hz with 1.5" wide wooden dowels and 1.5" thick baffle1 DC Audio 5.0k amp wired to .5 ohms nominal with an imp rise of 1.35 ohms for the single AA SMD 18"Future Vision 8000k 50w bi-xenon projector HID's with 4300k 35w fog lightsLink to my build: Buildupdates/progress Link to comment Share on other sites More sharing options...
killallblue Posted July 8, 2013 Report Share Posted July 8, 2013 I have used tons of hids the best are the cheap ones off amazon for me lol last me 2 years Link to comment Share on other sites More sharing options...
Brandonbkd Posted July 12, 2013 Report Share Posted July 12, 2013 x2 on the Xenons. $70 off eBay and I got 6000k 35w bulbs and ballast for my headlights and fogs. Not too bad quality for the price FI BL18 Build Log: CLICK HERE!! 2003 Explorer Sport: FI BL18 SoundQubed 2200 at 0.7ohm Pioneer DEH-2500UI Pioneer 6 x 8s Rockford Fosgate 6 x 9s 5 ft^3 box at 35hz Lots of Mega Mat Link to comment Share on other sites More sharing options...
Dangrebel Posted July 12, 2013 Report Share Posted July 12, 2013 I use and sell hyper lite hids. All the kits I've sold I haven't had a failure. Unless it was from abuse. 35w are 85$ and 55w are 100$! Both come with relay kit and bracket free! and man are they worth it! 1999 GMC Yukon, 6 PSI platform 5 18's, 4th order bandpass by BHE, Taramps, Link to comment Share on other sites More sharing options...
blankskater08 Posted July 12, 2013 Report Share Posted July 12, 2013 I have had DDM on my SUV (hi/low) combo, and on my Lancer SBRA with factory HIDs (replaced the stock bulbs and did matching fogs). Never had an issue yet and I love them. Old Build Log -2001 Sc2 Build w/ Full Range 8" Rears Other Installs! -06' PT Cruiser w/ Four P2 8s! -Installs for Funsies Link to comment Share on other sites More sharing options...
Sutliff Posted July 12, 2013 Report Share Posted July 12, 2013 X3 on XenonDepot, from knowing others that run them ... I am not into HIDs ... Though I do run Philips Diamond Vision 5000k hi/los & Philips Crystal Vision Ultra 4000K in my fogs ... 10w over OEM. I love my setup. Zeke '14 2003 Chevy Monte Carlo SS Vehicle Details & Mod List: http://www.stevemeadedesigns.com/board/garage/vehicle/1703-chevrolet-monte-carlo-ss/ Audio Build Log: http://www.stevemeadedesigns.com/board/topic/143276-2003-chevy-monte-carlo-ss-audio-build-ib-build Pioneer FH-P8000BT Infinity Kappa Perfect 6.1 Fi IB3 (Two 12", 2-ohm SVC) RF T400-2 & T500-1bdCP MechMan S Series 240A XS Power D3400 & D975 Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.