CleanSierra Posted March 3, 2016 Author Report Share Posted March 3, 2016 What's too big on the cutout, the space for the grill? If you want to use that grill, I'd say tape it off, put some foam tape around it, so you have a little gap, then body fill to it. By sticking the tape to the grill, and leaving the wax backing on it facing out, when you go to take the grill out, you should be able to slide it right out. Worst case is the wax backing stays behind and you just have to peel it off. That's basically what I did with my tablet mount. Worked well for me. Just a thought. Scott, that's a fantastic idea. If I didn't have access to Phillip's grilles(which are for the exact speakers I built these for), I'd take that suggestion. Fortunately, he has 4 brand new grilles and they'll work exactly for the holes I made. Im not the one you want to try to troll. Just a fyi for you. Link to comment Share on other sites More sharing options...
dolarbilz Posted March 3, 2016 Report Share Posted March 3, 2016 Are you going to wrap the door? Orpaint it? Link to comment Share on other sites More sharing options...
CleanSierra Posted March 4, 2016 Author Report Share Posted March 4, 2016 It's gonna get SEM textured(and I'm gonna try to simulate the factory plastic texture). I'm gonna like 2 tone the doors too Bill, with maybe a pinstripe or line of some kind to separate the lines. Im not the one you want to try to troll. Just a fyi for you. Link to comment Share on other sites More sharing options...
bcbrassard Posted March 4, 2016 Report Share Posted March 4, 2016 Doors looks good man. Getting close. I like the SEM products personally. Tuned in for end results. Link to comment Share on other sites More sharing options...
CleanSierra Posted March 4, 2016 Author Report Share Posted March 4, 2016 Here's my new basketcase Needs valves and God knows what. I'm down to find out. I basically stole the thing for what I paid so I hadn't plenty to spend Im not the one you want to try to troll. Just a fyi for you. Link to comment Share on other sites More sharing options...
boom50cal Posted March 4, 2016 Report Share Posted March 4, 2016 Here's my new basketcase Needs valves and God knows what. I'm down to find out. I basically stole the thing for what I paid so I hadn't plenty to spend that's a pretty scary fast bike. well for a kid that weighs less than 150lbs its scary fast. nice buy On 1/4/2013 at 9:31 PM, HatersGonnaHate said: Wow. 184 posts and I think you're a fucking asshole. Link to comment Share on other sites More sharing options...
Stitched Posted March 4, 2016 Report Share Posted March 4, 2016 Here's my new basketcase Needs valves and God knows what. I'm down to find out. I basically stole the thing for what I paid so I hadn't plenty to spend mmmmmmm all that arm ripping torque Link to comment Share on other sites More sharing options...
ToNasty Posted March 4, 2016 Report Share Posted March 4, 2016 Let's get down. I bought a new yamaha wr450f. Just had the big bore kit put in ***Super Sellers List***http://www.stevemeadedesigns.com/board/topic/25829-super-sellers-buyers Link to comment Share on other sites More sharing options...
CleanSierra Posted March 4, 2016 Author Report Share Posted March 4, 2016 Let's get down. I bought a new yamaha wr450f. Just had the big bore kit put in Fuel injected huh? Nice Im not the one you want to try to troll. Just a fyi for you. Link to comment Share on other sites More sharing options...
CleanSierra Posted March 4, 2016 Author Report Share Posted March 4, 2016 These came in for the pillars: Im not the one you want to try to troll. Just a fyi for you. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.