Leaderboard

Subwoooooooooooooofers.

picture this...someone pulls up to your shop (or garage). They complain that they keep blowing up tweeters or woofers....or whatever. You plug in the new dd-1+ and probe the outputs. Without even touching his system settings, you can see what his overlaps are set at already. Don't be surprised if you probe a problem system and find someone +22db over and wondering why they can't keep a tweet On mids/highs i normally wouldn't want to be to much over 5db of overlap. So you fix him up, and record the NEW overlaps (say you chose 4db). Write that down and next time he shows up, you can probe it and see if anyone f#cked with the settings. If it says 8db, you know his "buddy" helped turn up the volume for him (aka turned his gain up). Warranty voided. I might include some round stickers to go over the gain pot so when you are done you cover them up and avoid temptation

Introducing the newest, latest greatest tool in our lineup. The DD-1+. (EDIT: NOW IN STOCK!) Available now @ wcCarAudio http://www.wccaraudio.com , Amazon http://www.amazon.com/SMD-Distortion-Detector-DD-1-PLUS/dp/B00LNV9UVK/ref=sr_1_9?ie=UTF8&qid=1405034899&sr=8-9&keywords=smd+dd1 , Ebay, Sonic Electronix, Droppin Hz and more! The DD-1+. It is not the "DD2". It is "Plus" because we are not phasing out the first model at all. This is just the DD-1 on steroids. It has more features and a digital readout Here are a few bullet points - * Sets audio system gain overlap, continuously variable from 0.0dB - 15.0dB in 0.1dB steps * Checks gain overlap of an audio system without making any adjustments to the existing settings * Verifies that the gain overlap of an install hasn't been tampered with after install * Features our Patent Pending Distortion Detection system plus digital microcontroller and our proprietary firmware * 200V maximum input (same as DD-1 HV) * Quasi-RMS voltmeter (can detect clipping at any frequency) Want to know how it works? Check out this video. Wondering what to do with your old DD-1? I say Keep it! They aren't discontinued! If you would like to upgrade though, i am offering a $49.99 trade in discount. This is for unit's in good working condition and still in decent cosmetic shape. I suppose as long as it doesn't look like a truck ran it over, i will consider taking it in. CD's, Manuals, and Probes aren't necessary as i know those won't be in the best shape from normal use. Please email us at [email protected] , put DD1 TRADE IN in the subject....and let us know you are planning on sending in your original DD-1. Send it to us with your name, email address and phone number to contact you. We will invoice you separately with the discount and put you Also: i am offering free upgraded expedited shipping. You pay for basic ground, i upgrade it to 2nd day on me! get it faster! thanks for your attention!

Yeah more runs will help. With 2 1500.1bdcp and a 400.4 I'll be close to 300amps on music. RF says the 1500 1 does 100amps on average on music and the 400.4 like 40. Puts me at 240amps plus all the other electronics in the car. 2 runs of pos and if testing shows neg runs will help me I'll do those to.

you do realize by saying no vs threads you're rentamodding? so you're breaking the rules too, besides this isn't a vs thread, it's not x brand against y brand, it's 2 sundown subs, he's asking which would suit his application better. To the OP, i'd run the SA-8v2 over the SD any day.

Shoot I only plan to run 3400-3800rns total and have just about the same setup. 250amp singer alt, upgraded battery, 1 extra in the back and I'll be running an external regulator to get away from the pcm. If voltage stays above 13v I'll be happy. If not I'm adding batts until it does. I'll have 2 runs pos and maybe do neg runs maybe not. imo you said you only have one run of neg and pos front to back. Your running close to 5krms. Your exceeding what the wire can handle. Do at least one more run of pos. Neg if you want and since you already have a neg run why nit another. Then see what voltage is like. Should gain a little. if your still dropping either do an external regulator or the mla modular. And add some batts.

I had similar issues with my chevy avalanche 06. Finally broke down and got a alternator from singer that bypasses the PCM control,and I couldn't be happier,I haven't even noticed the voltage dropping below 14 at all. Got a rf 2500 on 3 fi 15sp4. 2xs battery . Before my lights would dim and voltage would drop into 11 sometimes 10.

a few were closer than you but they BUSTED (please see original post). i think you are the winner of the shirt. No loot though since it wasn't exact. Please contact me @ [email protected] and we will get that out to you! thanks for playing everyone!! it was fun!

Just remember.... Built, NOT BOUGHT, ok JP!

I gots me a dd-1+ on the way, number 4 on the way to match my others

Well I don't think I would trade in. I would think I could get more than 49 bucks for my DD-1 or at least I hope I could.

You guys keep putting these products out and come up with new ideas so fast. Is Nikola Tesla secretly working with D'amore? lol