AA98hoe

I saw a .3 gain some see .6....more voltage amperage both better for amp....

Thanks soapbox.. and yea I clamped 12k out of 2 m4s..with a slight clip.. so they were underated..ami had similiar results from the aqs..

You think only 1500amps? I say 2000amps..I had the ddm4s very similiar to aq3500 and the pulled close to 1000 amps

3500

Overpower subs and power all the time?.... bro id stick with 1 or maybe 2 amps...no way are you ready for 4. I have 3 alts 6 batterys and 10 runs of 0g and its not enough at idle to support 15k..2 alts and 20 batterys mite get you minimum voltage drop..but I doubt you have funds or space for that...I have over 5k in my electrical

I saw your build log ...nice box.... do you have any numbers out of this thing...

9.0 to 95203

On the chart what does the ohm rating mean.? For example my subs are d1.4s in parrallel so .7 wired with 8g..how many watts can the wire support

Real men wire at .35 daily..lol I have for 2 plus years no issues.....and with 5 different amps.. I don't suggest this to everyone....

Bashing lol.....what about amperage sir? Its not voltage the amp craves its the amperage correct?

My caps work..make a huge difference...he's probably clipping the amp... and normal caps are garbage and starve voltage

Good demo john...and rusty would of killed him with a demo in the van lol..putting DC on the map..good shit and he was right a lot of competitors running DC and taking championships

all in the box and electrical you better have 600 amps on tap to feed it.. i estmate 3k to 3800 is what you should get.. and the lvl4 is not a xl.. it goes 3, 4,xl,5,6,neo and thats the old line the new line is m2 but same order

Step up to 14v and you will never drop into 12s unless you want too

Yep Ray is right.. but for me more cone area was louder...what kind of power do you plan on running

What amp? What impedience are you wired at?..I have 1020amps of alt..6 xs d1400 10 runs of 0g on 2 dc7.5s and I can drop instantly at idle but on freway cruising at 2krpm I only drop .2 of a volt fulltilt...most alts do nothing at idle an I found out turn on an off if your idleing and rev... so you can do more batterys that will help to at least keep you at battery voltage

When I was ripping triple joints with my xls..rusty suggested lvl 5s because of the added motor force to control the cone.. xls are maxed out at 3300 to 3700 or so watts imo..that's what I found out..on music..

Broken flywheel.. or bad starter...you said it was running then died

You say 2 3500s strapped at 1ohm so that's .5 per amp..depending on box your rise is going to affect wattage..I wire at .35 each and rise to 10hm because my box is on the small side 16cf for 4 -18s...so let's say in a perfect world 7k on 12v..id do ascendant havocs you won't have enough power for mayhems unless you plan to upgrade...do 4 -15s and common chamber means all subs share the same airspace...this helps keep down the overall size of box and you can make it a lil smaller..

True to an extent... I was most impressed with tillers blazer..he has 4 sa10s on a sundown 4500 and played that thing all dAy with lil voltage drop...me I'm pushing 4700w to each 18 and can get mine warm playing below tuning or letting my voltage drop.id take that reliability all day over mine.....op get decent subs and build the box right on you should be fine

Yea that's ren it gets down....back to the op subs up port back should sound best don't go too high with box do common chamber tune mid 30s you should get loud

And who was that? Dc team? You talking bought the wrapped denal..? Those are lvl6s. I run mayhems and 2 7.5s and do those numbers.. I say 4-15s. M2xls,mayhems,nightshades etc

I ran strapped for over a year then started having issues..of course I strapped real low also... didn't see a gain unstrapping but solved my issues

Wake up all you drunk competitors....lol see you in a few..I'm ready an rested