SnowDrifter Posted April 13, 2013 Report Share Posted April 13, 2013 Box is looking good!Out of curiosity: How are you cutting your wood? ~~~~~~~~SAY NO TO PHOTOBUCKET~~~~~~~~ Snow's DD-1 tracks here: https://www.stevemeadedesigns.com/board/topic/167433-snows-dd-1-tracks/ My take on OFC vs CCA: https://www.stevemeadedesigns.com/board/topic/110381-things-that-piss-you-off-in-the-car-audio-world/?do=findComment&comment=2461444 Link to comment Share on other sites More sharing options...
Omega5002 Posted April 13, 2013 Report Share Posted April 13, 2013 Box is looking good! Out of curiosity: How are you cutting your wood? You don't need a table saw to cut wood, one can use a circle or jig saw with proper preparation. 2003 Kia Sorento Team Subsonic LowsTeam Bassin' on a Budget2016 Rebuild Under Construction Best score: 150.2 at 40hz (3k, 2 Custom HDC3 15's) Usaci style(door open, in the kick) Link to comment Share on other sites More sharing options...
OrionStang Posted April 13, 2013 Author Report Share Posted April 13, 2013 That looks really nice man. Looks like there won't be much baffle left after the subs are in lol. And thanks for the compliment...my boxes turn out pretty decent but damn it takes me forever haha. I'm hoping to start building another box for my blowthrough soon, but we will see. Haha pretty much, if the subs were square I don't think there'd be a baffle. Look forward to the blowthrough. The box doenst look removable But when your weak like me what is lol Its removeable, remember the mock up box I made? This is the same size. But about 3 times as heavy, not counting subs. Box is looking good! Out of curiosity: How are you cutting your wood? Thanks. Straight edge and circular saw. For each cut, measure a few times, then let her rip. Some of the shorter cuts are freehand with the circular. Box is looking good! Out of curiosity: How are you cutting your wood? You don't need a table saw to cut wood, one can use a circle or jig saw with proper preparation. Exactly. Just takes a ton of patience. I'll take a table saw any day LOL. SMD Super Seller My Feedback Thread Link to comment Share on other sites More sharing options...
sprkn_ranger Posted April 13, 2013 Report Share Posted April 13, 2013 Table saws are nice when the piece isn't too big, but I'd take a nice circular saw and a straight edge for the big pieces any day. And for kerfing big pieces, a circular saw is my tool of choice. Check out my build log! 4 Havocs in a blowthrough http://www.stevemeadedesigns.com/board/topic/187506-sprkn-rangers-blowthrough-build/ Link to comment Share on other sites More sharing options...
Omega5002 Posted April 13, 2013 Report Share Posted April 13, 2013 Box is looking very solid so far, and should be little louder since the port has no bends 2003 Kia Sorento Team Subsonic LowsTeam Bassin' on a Budget2016 Rebuild Under Construction Best score: 150.2 at 40hz (3k, 2 Custom HDC3 15's) Usaci style(door open, in the kick) Link to comment Share on other sites More sharing options...
CNF Kevosinn Posted April 13, 2013 Report Share Posted April 13, 2013 hell ya lookin good ken! Thanks for the batt today! *** SuperSeller Status Verified *** ( http://www.stevemeadedesigns.com/board/topic/25829-super-sellers-buyers/ ) "kevosinn's" astro van 8 custom Sundown Zv4 18's 4 Sundown scv 6000's CNF Distribution CNC parts Skyhigh wire some batteries SMD Meters and tools used on the installhttp://www.stevemeadedesigns.com/board/topic/172877-kevosinns-vanwest-coast-skyhigh-car-audio-vehicle/ 16,000 watt walled silverado build.http://www.stevemeadedesigns.com/board/topic/161965-walled-silverado-4-hdc4-15s-4-crescendo-3500s-and-much-more/ 8,000 watt 1999 Subaru legacy outback. Build log here: http://www.stevemead...ru/page__st__60TEAM CNF Distribution Link to comment Share on other sites More sharing options...
boom50cal Posted April 13, 2013 Report Share Posted April 13, 2013 I'm in love with that box. what's the plan for finishing it, carpet or paint bed line? I think it'd look pretty classy with a thick clear sealant. Birch is gorgeous. But its your build, have it your way! On 1/4/2013 at 9:31 PM, HatersGonnaHate said: Wow. 184 posts and I think you're a fucking asshole. Link to comment Share on other sites More sharing options...
OrionStang Posted April 13, 2013 Author Report Share Posted April 13, 2013 Don't know how Im going to finish it yet. Thought about vinyl again, but it just gets torn apart at the port opening. Maybe a dark stain, like a cherry. Gotta fill the screw holes first. Bought a bunch of the "small things". Threaded rod for bracing along with hardware, bolts and hardware for speaker terminals, and the paint for the port. As always, I forgot a couple things. Going back to Lowes in the morning. SMD Super Seller My Feedback Thread Link to comment Share on other sites More sharing options...
Kyblack76 Posted April 13, 2013 Report Share Posted April 13, 2013 Dark cherry sounds cool to me?!?!. Looks wicked clean man... SMD SUPER SELLER The Burban Build Blazer Build sold Acura trunk build sold Link to comment Share on other sites More sharing options...
SnowDrifter Posted April 13, 2013 Report Share Posted April 13, 2013 Hey you have birch, and it looks awesome when stained. So that would be my vote ~~~~~~~~SAY NO TO PHOTOBUCKET~~~~~~~~ Snow's DD-1 tracks here: https://www.stevemeadedesigns.com/board/topic/167433-snows-dd-1-tracks/ My take on OFC vs CCA: https://www.stevemeadedesigns.com/board/topic/110381-things-that-piss-you-off-in-the-car-audio-world/?do=findComment&comment=2461444 Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.